The Nu-Flame Fire Upgrade paint system has been developed for the over-coating of multi layered paints for areas without the need to strip the current paint. This Timber pack is ideal for doors and skirting. Advantages All packs achieve BS Class 1/0 Surface Spread of Flame protection For interior use only
Thermoguard Fire Varnish BS Class 1/0 & EN Class B s2 d0 System is a clear fire retardant varnish for interior and exterior timber surfaces. ADVANTAGES Clear or stained finish Tough/Durable finish UV and wear protection (Matt & Satin) Enhances natural beauty
Macropoxy 400 (formerly known as Sherwin-Williams Macropoxy C400V3) multi-functional epoxy zinc phosphate coating is suitable for the protection of steelwork in a range of exposure environments from C1 to C5. It was recently used on The Shard for corrosion protection. Recommended Uses Buildings Car parks Petrochemical plants Breweries...
Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron: Up to 90 minutes’ fire resistance Can be overcoated with compatible decorative topcoat Water-based Low odour Environmentally friendly Cost effective for large projects Certificate of supply available on request Can be applied by brush,...
High performance cleaning and preparation solutions for metal surfaces aimed to aid surface preparation prior to painting, and ensure the best results are achieved.
Metal surfaces can often look clean, but they can have a nasty way of hiding things that are difficult to detect until it's too late. With these degreasers, oil and rust removers, you can assure that you are starting your metal work on solid, clean foundations.
Be sure to get rid of all that oil, grease, dirt and fabrication lubricants before applying your paint system, you'll thank us for it!
- Brand: International
International Interplus 546 is a single component solvent based cleaner/degreaser, which is specifically designed to remove surface contamination such as oil, grease, dirt and soot from metallic and coated substrates as part of a maintenance program.
International Interplus 614 is a single component, water based rust remover gel, specifically designed to remove tightly adhering light to medium rust deposits from metallic substrates prior to repainting with approved maintenance coatings.
International Interplus 634 is specifically designed to remove tightly adhering coating residues from metallic substrates prior to repainting with approved maintenance coatings. Coating residues include conventional epoxies, polyurethanes, alkyds, acrylics and water borne coatings.
International Interprime 160 is a phosphoric acid based mordant solution for treating galvanised steel. International Interprime 160 is for the chemical pretreatment of galvanised steel prior to the application of protective coating systems, in order to ensure good adhesion where blasting or abrasion is not possible.
We have a huge selection of metal paints in our warehouse specified to the needs of your environment. There are direct to metal paints, metallic finishes, primers, undercoats, topcoats, and heat resistant paints, a category that Rawlins Paints are the NUMBER 1 distributor for in the United Kingdom.
We also stock the very popular CombiColor and Noxyde range from Rust-Oleum, as well as paints by International, Coo-Var, Jotun, Teamac, Sika, Sherwin-Williams and more!