High performance cleaning and preparation solutions for metal surfaces aimed to aid surface preparation prior to painting, and ensure the best results are achieved.
Metal surfaces can often look clean, but they can have a nasty way of hiding things that are difficult to detect until it's too late. With these degreasers, oil and rust removers, you can assure that you are starting your metal work on solid, clean foundations.
Be sure to get rid of all that oil, grease, dirt and fabrication lubricants before applying your paint system, you'll thank us for it!
Tor T-Wash Mordant Solution, a pre-treatment wash for galvanised steel that ensures adhesion for a wider range of subsequent coatings. The product changes colour (from grey to black) for a visual aid and proof that the entire surface has been treated satisfactorily.
Good coverage - up to 20 square metres per litre
Pre-treatment only -...
We have a huge selection of metal paints in our warehouse specified to the needs of your environment. There are direct to metal paints, metallic finishes, primers, undercoats, topcoats, and heat resistant paints, a category that Rawlins Paints are the NUMBER 1 distributor for in the United Kingdom.
We also stock the very popular CombiColor and Noxyde range from Rust-Oleum, as well as paints by International, Coo-Var, Jotun, Teamac, Sika, Sherwin-Williams and more!
Colour Sample Disclaimer
• These colour samples are to be used for guidance only.
• Product contained within is generic to provide a close representation to your chosen colour.
• Should not be used to carry out any painting project, this is for colour selection purposes only and does not remove the need for you to ensure the correct product is chosen and tested for your application once a colour has been decided on.
• It is not a sample of the product you intend to purchase/use and cannot be used to test anything other than colour appearance.
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application, batches variances number of coats and substrate surface.
• We cannot therefore promise that the colour of the product you ultimately purchase will exactly match the colour of this colour sample.
• Once you have selected a colour, you must purchase the smallest amount of the product you intend to use in your chosen colour and apply to a small, inconspicuous test area to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.
Colourmatch Service Disclaimer
• Notwithstanding any other provision of our conditions of sale, you agree and understand that many factors affect the colour of a painted product, including lighting, sheen level, method of application and product surface.
• We cannot therefore promise that the colour of the product you paint with the Kolorbond paint will exactly match the colour of the item you send to us.
• You must therefore purchase the smallest Kolorbond paint pot available first and then apply the paint to a small, and where possible hidden, test area of your product to be sure that it meets your expectations.
• Leave the product for 24 hours and then only buy more paint and/or apply more paint to your product if you are completely happy with the results on the test area.
• We cannot be liable to you for any loss or damage if you have not complied with this process.