The Nu-Flame Fire Upgrade paint system has been developed for the over-coating of multi layered paints for areas without the need to strip the current paint. This Timber pack is ideal for doors and skirting. Advantages All packs achieve BS Class 1/0 Surface Spread of Flame protection For interior use only
Thermoguard Fire Varnish BS Class 1/0 & EN Class B s2 d0 System is a clear fire retardant varnish for interior and exterior timber surfaces. ADVANTAGES Clear or stained finish Tough/Durable finish UV and wear protection (Matt & Satin) Enhances natural beauty
Macropoxy 400 (formerly known as Sherwin-Williams Macropoxy C400V3) multi-functional epoxy zinc phosphate coating is suitable for the protection of steelwork in a range of exposure environments from C1 to C5. It was recently used on The Shard for corrosion protection. Recommended Uses Buildings Car parks Petrochemical plants Breweries...
Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron: Up to 90 minutes’ fire resistance Can be overcoated with compatible decorative topcoat Water-based Low odour Environmentally friendly Cost effective for large projects Certificate of supply available on request Can be applied by brush,...
Rawlins Paints’ stocked metal paints have increased considerably in volume through 2018, as more industry standard coatings from Ardenbrite, Blackfriar, Coo-Var, International, Jotun, Mathys, Nullifire, Rust-Oleum, Sherwin-Williams, Sika, Solignum, Teamac and more are now available to buy online, all with next day delivery. It is one of the widest product and manufacturer selections available in the UK, with industrial metal paints and coatings suitable for cladding, structural steel, heat resistant purposes, priming new construction materials, delivering anti-corrosive protection to marine and off-shore environments, tank and pipe lining coatings, and treating and covering rust.
So, if you require unbeatable colour retention, chemical resistance, UV protection, low-temperature applied metal paints and coatings, amongst other criteria, find the best product today, at Rawlins Paints.
- Brand: International
International Intercryl 525 is designed for use as a primer/finish for structural steel, in a wide variety of general industrial environments of light to moderate corrosivity, including on bridges, commercial buildings, infrastructure and manufacturing plants. It exhibits excellent colour and gloss retention.
As a single coat polyaspartic primer finish, International Intercure 99 can replace two coat systems for ISO 12944 C3 environments. Drying hard in 1½ hours at 25ºC (77ºF), International Intercure 99 can increase productivity, reduce VOC levels and provide anti-corrosive protection with long lasting aesthetics.
International Intercure 200 is a two component epoxy zinc phosphate/micaceous iron oxide primer, formulated on proprietary polymer technology, which provides rapid cure and overcoating even under low temperature conditions. A high solids, low VOC product.
A fast drying reputation isn't all International Intercure 200HS is renowned for. Complete with MIO, this fast cure anti-corrosive primer/intermediate with added barrier protection, can improve your productivity and lower your solvent emissions.
International Intercure 324 is a two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer offering excellent barrier protection, low temperature cure and rapid overcoating properties. Pigmented with zinc phosphate anti-corrosive pigment to comply with the requirements of BS5493:1977.
International Intercure 384 is a two component, high solids, low VOC epoxy micaceous iron oxide intermediate coating offering excellent barrier protection, low temperature cure and rapid overcoating properties. Pigmented with micaceous iron oxide to comply with the requirements of BS5493:1977
International Intercure 420 is a two component, high solids, low VOC epoxy micaceous iron oxide coating formulated on proprietary polymer technology which provides rapid cure and overcoating even under low temperature conditions.
International Interfine 629HS is a low VOC, high performance, two component, isocyanate free crosslinking acrylic finish which provides good durability in terms of colour and gloss retention.
International Interfine 691 is a two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability. International Interfine 691 offers equivalent performance to typical recoatable polyurethane cosmetic finishes.
International Interfine 878 is a high performance, two component, high solids finish which contains no free isocyanates, offers compliance to current VOC legislation, and affords extended lifetime to first maintenance when utilised as part of a high performance anticorrosive system.
International Interfine 979 significantly improves upon the gloss and colour retention exhibited by typical polyurethane finishes also displays the same corrosion resistance and has enhanced mechanical properties when compared to traditional epoxy technology.