The Nu-Flame Fire Upgrade paint system has been developed for the over-coating of multi layered paints for areas without the need to strip the current paint. This Timber pack is ideal for doors and skirting. Advantages All packs achieve BS Class 1/0 Surface Spread of Flame protection For interior use only
Thermoguard Fire Varnish BS Class 1/0 & EN Class B s2 d0 System is a clear fire retardant varnish for interior and exterior timber surfaces. ADVANTAGES Clear or stained finish Tough/Durable finish UV and wear protection (Matt & Satin) Enhances natural beauty
Macropoxy 400 (formerly known as Sherwin-Williams Macropoxy C400V3) multi-functional epoxy zinc phosphate coating is suitable for the protection of steelwork in a range of exposure environments from C1 to C5. It was recently used on The Shard for corrosion protection. Recommended Uses Buildings Car parks Petrochemical plants Breweries...
Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron: Up to 90 minutes’ fire resistance Can be overcoated with compatible decorative topcoat Water-based Low odour Environmentally friendly Cost effective for large projects Certificate of supply available on request Can be applied by brush,...
Rawlins Paints’ stocked metal paints have increased considerably in volume through 2018, as more industry standard coatings from Ardenbrite, Blackfriar, Coo-Var, International, Jotun, Mathys, Nullifire, Rust-Oleum, Sherwin-Williams, Sika, Solignum, Teamac and more are now available to buy online, all with next day delivery. It is one of the widest product and manufacturer selections available in the UK, with industrial metal paints and coatings suitable for cladding, structural steel, heat resistant purposes, priming new construction materials, delivering anti-corrosive protection to marine and off-shore environments, tank and pipe lining coatings, and treating and covering rust.
So, if you require unbeatable colour retention, chemical resistance, UV protection, low-temperature applied metal paints and coatings, amongst other criteria, find the best product today, at Rawlins Paints.
- Brand: Zinga
Zinga is a one-component anti-corrosion zinc coating system that provides cathodic protection to steel comparable with hot-dip galvanising, with the added advantage that it can be applied as though it were a paint, and is certified to not spread flame or create smoke (BS476 parts 6&7). Can protect longer than hot-dip galvanising (at the...
The Zinga film galvanising system in the convenience of a 500ml aerosol spray can. Use to repair or touch up galvanising, damaged or old hot-dipped, other zinc coated structures or products previously treated with Zinga in marine structures, new steel and galvanising, cast-iron and aluminium alloys. Repair for worn or damaged hot-dip...
Zingaluspray, a cross between the original Zingaspray and Aluspray in a handy 500ml aerosol spray can for touching up and repairing galvanising. Containing more aluminium flakes for a galvanised look, the spray still contains 92% Zinc in the dry film and provides cathodic protection to ferrous metals. Very economical - ideal for small...
Aluspray, a finishing coat that improves the aesthetic of Zinga in a handy and economical 500ml aerosol spray can. Ideal for spot treatment on small areas and touching up HDG, metallisation or previously treated Zinga surfaces. Efficient and solid Aluminium colour (~RAL 9006: comparable to hot-dip) Good resistance to mechanic shocks,...
Aquazinga, a two-pack anti-corrosion system providing cathodic protection to ferrous metals, and can be used as an alternative to hot-dip galvanisation or metallisation. Designed to withstand high temperatures (up to 600°C) and corrosive environments and severe conditions such as ballast tanks, turbine exhausts and high-heat pipelines....
Zingaceram HS, a high solid 2 pack intermediate coat to be applied as a sealer over Zinga. The coating has been used on both structural steelwork (for multi-million pound projects) and on sub-sea pipelines. 2 pack system Seals Zinga with good compatibility Apply by brush, roller, conventional sprayer or by airless spraying High solid...
Zingaceram PU, a 2-pack system with ceramic particles for high chemical and abrasion resistance in tough environments, such as dust and wind-blown sand. Recommended for use as a top coat finish in a Zinga system. Available in more than 150 RAL colours Topcoat 2-pack system for Zinga Apply by brush, roller, conventional sprayer or airless...
Zingalufer, previously known as Alufer N, an intermediate layer or topcoat for existing layers of Zinga in immersed or chemical environments, such as ship hulls and sewage works, providing a protective seal against salt and chemical exposure. Apply by brush, roller, conventional sprayers or aireless spray One pack system Dry in as little...
Zingatarfree (Formally PU Tarfree MIO) is ideal for marine environments and immersion, such boat hulls, with excellent water, corrosion and chemical resistance, and can be used as a replacement for normal coal tar products Single-pack polyurethane paint Use as part of a duplex system with Zinga Apply by brush, roller, conventional...
Alu ZM, a quick-drying one-pack coating for use as an aluminium topcoat on Zinga or applied directly onto old, uncorroded hot-dip galvanised or thermal sprayed zinc substrates. One pack system Topcoat for Zinga Apply by brush or sprayer Not to be applied by a roller Touch dry in 25 minutes, full cured in 24 hours
Zinga PU Thinner 05, specifically for use with Zinga Zingaceram PU, a 2-pack system with ceramic particles for high chemical and abrasion resistance in tough environments, such as dust and wind-blown sand.
Metal primers and rust-inhibiting undercoats provide the crucial stage to any major maintenance, renovation and metal restoration work. Whether it is for cladding, roofing, floors, mezzanines, helipads, steel and cast-iron structures, or oil tankers, metal primers are available to buy here today, in combination with other products and topcoats required to finish a major build or small project, in almost any working and environmental conditions.
Direct to metal paints are the quickest and easiest way to cover rust, or deliver high-quality finishes to areas with minimal surface preparation. Some of the better known direct-to-metal products include coatings from Rust-Oleum’s CombiColor and Noxyde ranges.
Metal topcoat finishes can either be used to complete full paint systems, or refinish any maintenance or repair work that has been done. Aluminium paints, high-gloss finishes for increased durability in high-humidity environments, enamel and gold-effect or metallic finishes are popular specialist metal topcoats that deliver much improved results over standard coatings.
Heat resistant paints for metal are not the same as intumescent paints for steel. Heat resistant paints have been specifically designed to withstand high-heat temperatures up-to 750°C – for use on chimneys, pipes, engines, log-burners, and exhaust pipes, etc. They will not break down under duress of high-temperatures, and the products available to buy today at Rawlins Paints are designed for commercial and industrial use.
Metal cladding paints can rejuvenate and re-colour aged and weathered cladding. As businesses re-brand, so do colour schemes – which using a high-quality metal cladding paint can mean that the façade to a business property can be relaunched extremely quickly.
Teamac, International, Jotun and Sherwin-Williams are amongst the specialist manufacturers producing high-grade marine paints and coatings for boats, yachts, cruisers, trawlers, etc. These metal paints are designed to protect metal surfaces in submerged environments, and even in ice-cold Arctic conditions.
Whilst many metal paints can be applied by brush, roller and spray, Rawlins Paints also stock aerosols for use on metal and metallic surfaces and substrates – from primers to topcoats. Rust-Oleum Hard Hat Topcoats are the number 1 best-selling industrial aerosols for metal, delivering high-quality gloss finishes with superb colour retention.
In more extreme corrosive and industrial environments, including power stations, oil refineries, pulp and paper plants, gas pipe infrastructures, chemical processing plants, aviation sites and hangers, low temperature coatings may be required. Tank coatings and linings available also provide industrial solutions for internal and external surfaces of tanks storing gas, water or aviation fuel. A wide range of metal paints do provide above standard chemical resistance, but the range of specialist chemically resistant coatings also available at Rawlins Paints offer extreme protection to concrete, metal and other building and storage facility substrates dealing with corrosive chemicals, acids and materials on a daily basis.
A series of easy to use products that require no specialist skills to apply, for day-to-day maintenance of metal. The products require minimal surface preparation, are quick drying and are usually sufficient with just one or two coats.
This range offers products that offer longer term protection against more demanding conditions such as, extreme corrosion, chemicals, impact and abrasion, coastal environments, etc. These systems often include multiple coats and products, more stringent preparation requirements and more need for care to be taken over application.
Our help and advice promise
Call our Technical Team to discuss which area your project falls into and what product(s) will be best for you. Site visits can be carried out for larger projects so a full specification can be produced in writing, which will be tailored to meet the projects requirements. Data sheets and advice are always freely available to help you with your project.