Bradite Rapid is a high performance single-pack moisture cure polyurethane floor coating that is ideal for commercial and industrial environments. Available in a large amount of colours, including RAL shades, the tough and flexible film will provide water and chemical resistance. Advantages Available in more than 350 colours in RAL &...
Macropoxy 400 (formerly known as Sherwin-Williams Macropoxy C400V3) multi-functional epoxy zinc phosphate coating is suitable for the protection of steelwork in a range of exposure environments from C1 to C5. It was recently used on The Shard for corrosion protection. Recommended Uses Buildings Car parks Petrochemical plants Breweries...
Bedec Multi Surface Paint is a renowned non-yellowing, water-based paint that resists flaking or peeling because of its outstanding flexibility. Low VOC Environmentally friendly Quick drying Micro-porous Low odour No primer/undercoat required Matt, satin or gloss Colour choice PLEASE SEE LONG DESCRIPTION FOR AVAILABLE QUANTITIES...
Sherwin-Williams Cleanser/Thinner No.5 is a specially formulated blend of solvents designed to mix with its compatible Sherwin-Williams products to create an optimal consistency for application whether it be for Brush, Roller or Spray. It can also be used for cleaning of surfaces and application equipment. 1 x 5l available - now 50% off
Rawlins Paints’ stocked metal paints have increased considerably in volume through 2018, as more industry standard coatings from Ardenbrite, Blackfriar, Coo-Var, International, Jotun, Mathys, Nullifire, Rust-Oleum, Sherwin-Williams, Sika, Solignum, Teamac and more are now available to buy online, all with next day delivery. It is one of the widest product and manufacturer selections available in the UK, with industrial metal paints and coatings suitable for cladding, structural steel, heat resistant purposes, priming new construction materials, delivering anti-corrosive protection to marine and off-shore environments, tank and pipe lining coatings, and treating and covering rust.
So, if you require unbeatable colour retention, chemical resistance, UV protection, low-temperature applied metal paints and coatings, amongst other criteria, find the best product today, at Rawlins Paints.
Blackfriar Aluminium Paint is heat resistant up to 150ºC and rovides long-lasting, heat-resistant protection for interior and exterior surfaces. You can use it on metal and wood, on surfaces including car wheels, gates, railings, pipework etc. Product Features Extra bright finish. Heat resistant up to 150oC. Interior and exterior use....
Blackfriar Enamel Paint is a tough, hard-wearing gloss enamel finish. Suitable for use on wood, metal and plaster. Ideal for garden tools, plaques and models. Product Features Long lasting finish Tough and durable For use on wood, metal and plaster High gloss Interior and exterior use Solvent-based
Blackfriar Quick Drying Metal Paint has been specially formulated to provide a tough, long-lasting, high gloss finish. It is heat resistant up to 150ºC/300ºF. It can be used inside and outside on metal and wood, and is ideal for factory maintenance such as plant and machinery, as well as around the home. Product Details Interior and...
Blackfriar Satin Black is an attractive, hard-wearing, black satin finish for metal and wood. Ideal for old beams, wrought ironwork, gates, railings, doors, skirting and steel fabrications. Product Features Black satin finish. Interior / exterior. Hard-wearing and durable. Designed for metal and wood. Ideal for gates, railings and...
Everbuild 901 Black Bitumen Paint is a solvent based, full bodied black bitumen paint, When dry, the product forms an odourless and taint free bitumen film suitable for the protection of metals, concrete roofing, felt, fibre cement, corrugated iron, asphalt and wood against water attack.
A ready-mixed maintenance paint for metal and other surfaces which adheres to the surface to which it is applied to form an impervious film which can withstand adverse climatic conditions. Coverage Calculator
Coo-Var Heat Resistant Black Enamel is a high quality enamel for use at temperatures up to 600 deg c indirect heat. May be used as a single coat for fire surrounds, radiators, hot pipes and more. Product Features Heat resistant paint Great heat resistance Apply direct Fast drying time Satin finish Great for domestic use Low sheen
Blackfriar High-Heat Resistant Paint is a heat-resistant, smooth and hard-wearing black matt finish for metal. Heat resistant up to 600°C. Ideal for barbecues, grates, chimineas and radiators. A durable and attractive finish. Product Details Up to 600°C heat-resistance. Attractive matt finish. Interior and exterior use. Hard-wearing.
Teamac High Temperature Aluminium Paint. A high quality enamel for use at temperatures up to 450°C indirect heat. Advantages Ideal for use in areas prone to heat Can be used as a single coat for fire surrounds, radiators, hot pipes and more Click to jump down to Technical Data Coverage Calculator
Rust-Oleum 569/580 Quick Drying Metal Primer is a single pack quick drying metal primer for bare and lightly rusted metal. It should be used on new, blasted or slightly rusted steel surfaces. Depending on the exposure conditions, it can be recoated with a variety of Rust-Oleum Systems assuring the appropriate protection. Recoatable in just...
Rust-Oleum 769/780 Damp-Proof Rust Primer is a single pack rust primer for direct application on slightly moist or dry metal surfaces. It is specially developed to be applied on hand tool prepared sound rusted steel surfaces. Requires minimal surface preparation Penetrates deep into the rust for optimal protection Expels moisture &...
Rust-Oleum 9169 Epoxy Rust Primer is a low viscous epoxy rust-primer with outstanding adhesion and corrosion protection for manually derusted metals and can be recoated with Rust-Oleum 9100 topcoats. Can be applied directly to sound rusted surfaces (less work) Penetrates through rust onto sound metal Contains a high amount of rust...
Metal primers and rust-inhibiting undercoats provide the crucial stage to any major maintenance, renovation and metal restoration work. Whether it is for cladding, roofing, floors, mezzanines, helipads, steel and cast-iron structures, or oil tankers, metal primers are available to buy here today, in combination with other products and topcoats required to finish a major build or small project, in almost any working and environmental conditions.
Direct to metal paints are the quickest and easiest way to cover rust, or deliver high-quality finishes to areas with minimal surface preparation. Some of the better known direct-to-metal products include coatings from Rust-Oleum’s CombiColor and Noxyde ranges.
Metal topcoat finishes can either be used to complete full paint systems, or refinish any maintenance or repair work that has been done. Aluminium paints, high-gloss finishes for increased durability in high-humidity environments, enamel and gold-effect or metallic finishes are popular specialist metal topcoats that deliver much improved results over standard coatings.
Heat resistant paints for metal are not the same as intumescent paints for steel. Heat resistant paints have been specifically designed to withstand high-heat temperatures up-to 750°C – for use on chimneys, pipes, engines, log-burners, and exhaust pipes, etc. They will not break down under duress of high-temperatures, and the products available to buy today at Rawlins Paints are designed for commercial and industrial use.
Metal cladding paints can rejuvenate and re-colour aged and weathered cladding. As businesses re-brand, so do colour schemes – which using a high-quality metal cladding paint can mean that the façade to a business property can be relaunched extremely quickly.
Teamac, International, Jotun and Sherwin-Williams are amongst the specialist manufacturers producing high-grade marine paints and coatings for boats, yachts, cruisers, trawlers, etc. These metal paints are designed to protect metal surfaces in submerged environments, and even in ice-cold Arctic conditions.
Whilst many metal paints can be applied by brush, roller and spray, Rawlins Paints also stock aerosols for use on metal and metallic surfaces and substrates – from primers to topcoats. Rust-Oleum Hard Hat Topcoats are the number 1 best-selling industrial aerosols for metal, delivering high-quality gloss finishes with superb colour retention.
In more extreme corrosive and industrial environments, including power stations, oil refineries, pulp and paper plants, gas pipe infrastructures, chemical processing plants, aviation sites and hangers, low temperature coatings may be required. Tank coatings and linings available also provide industrial solutions for internal and external surfaces of tanks storing gas, water or aviation fuel. A wide range of metal paints do provide above standard chemical resistance, but the range of specialist chemically resistant coatings also available at Rawlins Paints offer extreme protection to concrete, metal and other building and storage facility substrates dealing with corrosive chemicals, acids and materials on a daily basis.
A series of easy to use products that require no specialist skills to apply, for day-to-day maintenance of metal. The products require minimal surface preparation, are quick drying and are usually sufficient with just one or two coats.
This range offers products that offer longer term protection against more demanding conditions such as, extreme corrosion, chemicals, impact and abrasion, coastal environments, etc. These systems often include multiple coats and products, more stringent preparation requirements and more need for care to be taken over application.
Our help and advice promise
Call our Technical Team to discuss which area your project falls into and what product(s) will be best for you. Site visits can be carried out for larger projects so a full specification can be produced in writing, which will be tailored to meet the projects requirements. Data sheets and advice are always freely available to help you with your project.