Sub-category links
Filter By
Brand
Brand
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Usages
Usages
Base Type
Base Type
Application Method
Application Method
Touch Dry (at 20°C)
Touch Dry (at 20°C)
Industry Approved System
Industry Approved System
Non - Isocyanate
Non - Isocyanate
There are 859 products.
Active filters
HMG Cellulose APS Primer Aerosol is a quick drying cellulose primer for use in aerosols, classic car refinish and industrial applications. This product is also available in non-aerosol form, please see HMG Cellulose APS Primer.400ml/16oz Aerosol Matt finish Available in grey (APS2) or white (APS1) Please note: Not to be used in...
£15.74 (incl. VAT)
£13.12 (ex. VAT)
HMG Electrobond 7 Aerosol is a bare metal primer containing a high proportion of zinc dust. For the non-aerosol version of this product please see HMG Electrobond 7.400ml/16oz Aerosol It gives high performance corrosion protection to ferrous metal Excellent adhesion, sacrificial and self-healing properties Cold galvanizing system Quick...
£24.31 (incl. VAT)
£20.26 (ex. VAT)
Tikkurila GrafoTherm is a one-component water-based anti-condensation coating for steel roofing sheets, steel structures and other metal surfaces, where condensation and dripping-water problems occur. It is also suitable for mineral walls and ceilings.Matt Finish Excellent moisture absorbing and evaporation properties Forms an elastic,...
£241.72 (incl. VAT)
£201.43 (ex. VAT)
Flag Anti Rugine (MIO) Anti-Rust Paint is a high quality one coat anti-rust metal paint based on Micaceous Iron Oxide. It is a high build primer and/or finish suitable for either brushing or spraying purposes.Ideal for both interior and exterior applications Provides excellent adhesion to ferrous metals and imparts good water resistance...
£41.54 (incl. VAT)
£34.62 (ex. VAT)
Flag Anti-Corrosive QD Metal Primer is a high build quick air-drying oxide primer for use on ferrous metals, which provides good protection prior to over coating with most solvent based finishing products.Ideal for interior and exterior Industrial Structural Steel Suitable for a wide variety of applications where speed and ease of...
£23.57 (incl. VAT)
£19.64 (ex. VAT)
Flag QD Metal Paint Hammer Finish is a quick drying paint to which gives a ‘hammer finish’ to metal substrates with excellent corrosion resistant properties. Provides good protection when used in conjunction with Flag Anti-Corrosive QD Metal Primer.Ideal for interior and exterior Industrial Structural Steel Suitable for a wide variety of...
£17.77 (incl. VAT)
£14.81 (ex. VAT)
Flag QD Metal Paint Smooth Finish is a quick air drying gloss finish which gives a hard durable finish to metal substrates with excellent corrosion resistant properties. Provides good protection when used in conjunction with Flag Anti-Corrosive QD Metal Primer.Ideal for interior and exterior Industrial Structural Steel Suitable for a wide...
£17.77 (incl. VAT)
£14.81 (ex. VAT)
Flag Primer Undercoat is a one coat obliterating undercoat/primer alkyd resin system (solvent based) for use under Flag Gloss Paint and other Alkyd based topcoats. The product is ideally suited for kitchens and bathrooms, doors, window frames, furniture and woodwork in general.For interior and exterior use Ideal for woodwork, fibreboards...
£10.98 (incl. VAT)
£9.15 (ex. VAT)
Flag Rust Converter is a high performance water based low odour and environmentally friendly primer treatment which neutralises rust and forms a tough black surface. It prevents rust re-occurring and is quick drying and easy to use.For interior and exterior use Suitable for over-coating with solvent based primers or top coats For use on...
£10.48 (incl. VAT)
£8.73 (ex. VAT)
Flag Undercoat is a superior alkyd undercoat (solvent based product) with excellent obliterating properties. For all general wood and metal surfaces under Flag Gloss Paint and other Alkyd based topcoats. The product is ideally suited for kitchens and bathrooms, doors, window frames, furniture and woodwork in general.For interior and...
£11.23 (incl. VAT)
£9.36 (ex. VAT)
Flag Advanced Technologies Universal Primer is a water-based primer-sealer for interior and exterior areas, offering low-odour application and quick drying convenience. It also promotes adhesion on difficult surfaces and effectively primes, seals and blocks stains.For use on plaster, wood, concrete and painted surfaces Prevents rust...
£20.80 (incl. VAT)
£17.33 (ex. VAT)
Flag Gloss Paint is a superior quality alkyd topcoat reinforced with polyurethane resin. It is ideally suited for kitchens and bathrooms, doors, window frames, furniture and woodwork in general. The ideal topcoat for use over Flag Trade Primer/Undercoat.For interior and exterior use on all general wood and metal surfaces Extra Opacity -...
£14.58 (incl. VAT)
£12.15 (ex. VAT)
Sub-category links
Filter By
Brand
Brand
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Usages
Usages
Base Type
Base Type
Application Method
Application Method
Touch Dry (at 20°C)
Touch Dry (at 20°C)
Industry Approved System
Industry Approved System
Non - Isocyanate
Non - Isocyanate
Metal primers and rust-inhibiting undercoats provide the crucial stage to any major maintenance, renovation and metal restoration work. Whether it is for cladding, roofing, floors, mezzanines, helipads, steel and cast-iron structures, or oil tankers, metal primers are available to buy here today, in combination with other products and topcoats required to finish a major build or small project, in almost any working and environmental conditions.
Direct to metal paints are the quickest and easiest way to cover rust, or deliver high-quality finishes to areas with minimal surface preparation. Some of the better known direct-to-metal products include coatings from Rust-Oleum’s CombiColor and Noxyde ranges.
Metal topcoat finishes can either be used to complete full paint systems, or refinish any maintenance or repair work that has been done. Aluminium paints, high-gloss finishes for increased durability in high-humidity environments, enamel and gold-effect or metallic finishes are popular specialist metal topcoats that deliver much improved results over standard coatings.
Heat resistant paints for metal are not the same as intumescent paints for steel. Heat resistant paints have been specifically designed to withstand high-heat temperatures up-to 750°C – for use on chimneys, pipes, engines, log-burners, and exhaust pipes, etc. They will not break down under duress of high-temperatures, and the products available to buy today at Rawlins Paints are designed for commercial and industrial use.
Metal cladding paints can rejuvenate and re-colour aged and weathered cladding. As businesses re-brand, so do colour schemes – which using a high-quality metal cladding paint can mean that the façade to a business property can be relaunched extremely quickly.
Teamac, International, Jotun and Sherwin-Williams are amongst the specialist manufacturers producing high-grade marine paints and coatings for boats, yachts, cruisers, trawlers, etc. These metal paints are designed to protect metal surfaces in submerged environments, and even in ice-cold Arctic conditions.
Whilst many metal paints can be applied by brush, roller and spray, Rawlins Paints also stock aerosols for use on metal and metallic surfaces and substrates – from primers to topcoats. Rust-Oleum Hard Hat Topcoats are the number 1 best-selling industrial aerosols for metal, delivering high-quality gloss finishes with superb colour retention.
In more extreme corrosive and industrial environments, including power stations, oil refineries, pulp and paper plants, gas pipe infrastructures, chemical processing plants, aviation sites and hangers, low temperature coatings may be required. Tank coatings and linings available also provide industrial solutions for internal and external surfaces of tanks storing gas, water or aviation fuel. A wide range of metal paints do provide above standard chemical resistance, but the range of specialist chemically resistant coatings also available at Rawlins Paints offer extreme protection to concrete, metal and other building and storage facility substrates dealing with corrosive chemicals, acids and materials on a daily basis.
Easy Maintenance
A series of easy to use products that require no specialist skills to apply, for day-to-day maintenance of metal. The products require minimal surface preparation, are quick drying and are usually sufficient with just one or two coats.
High Performance
This range offers products that offer longer term protection against more demanding conditions such as, extreme corrosion, chemicals, impact and abrasion, coastal environments, etc. These systems often include multiple coats and products, more stringent preparation requirements and more need for care to be taken over application.
Our help and advice promise
Call our Technical Team to discuss which area your project falls into and what product(s) will be best for you. Site visits can be carried out for larger projects so a full specification can be produced in writing, which will be tailored to meet the projects requirements. Data sheets and advice are always freely available to help you with your project.
