Sub-category links
Filter By
Brand
Brand
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Usages
Usages
Base Type
Base Type
Application Method
Application Method
Touch Dry (at 20°C)
Touch Dry (at 20°C)
Industry Approved System
Industry Approved System
Non - Isocyanate
Non - Isocyanate
There are 859 products.
Active filters
Hempacore AQ 48860 is a one-component water-borne, chlorine free, physically drying intumescent coating for passive fire protection of structural steel against cellulosic fires. No VOC (according to ISO11890-2) and is suitable for in-shop and on-site applications.For professional use only Use as intumescent fire protection for structural...
£297.97 (incl. VAT)
£248.31 (ex. VAT)
Hempalin Enamel 52140 is a glossy, general purpose, alkyd topcoat forming a weather resistant coating. The product is flexible and resistant to salt water and spillage of mineral oil and other aliphatic hydrocarbons.Recommended as finishing coat for alkyd systems on exterior and interior steel and woodwork in mildly to moderately corrosive...
£45.29 (incl. VAT)
£37.74 (ex. VAT)
Hempel's Polyenamel 55102 is a two-component, high-gloss acrylic polyurethane enamel cured with aliphatic isocyanate, with good gloss and colour retention.Glossy decorative topcoat in severely corrosive atmospheric environments on properly prepared metals such as aluminium, stainless steel and galvanized steel. Excellent adhesion on wood...
£74.48 (incl. VAT)
£62.07 (ex. VAT)
Hempathane Topcoat 55210 is a glossy polyurethane topcoat that is cured with aliphatic isocyanate and delivers good gloss and colour retention.Recommended as a finishing coat for protection of structural steel in severely corrosive atmospheric environment, where colour fastness and gloss retention are required Complies with EU Directive...
£74.48 (incl. VAT)
£62.07 (ex. VAT)
Hempel Hempathane HS 55610 is a glossy polyurethane topcoat, cured with aliphatic isocyanate. The product has good gloss and colour retention and contains zinc phosphate.For professional use only Recommended as VOC compliant, highbuild finishing coat for protection of structural steel in severely corrosive environment, and may be...
£77.40 (incl. VAT)
£64.50 (ex. VAT)
Hempathane HS 55613 is a two-component semi-gloss acrylic polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention. Contains zincphosphate.For professional use only For new build, maintenance and repair Up to 120°C service temperature VOC-compliant, high-build finishing coat for protection of structual...
£77.39 (incl. VAT)
£64.49 (ex. VAT)
Hempel's Pro Acrylic 55883 is a two-component, isocyanate-free, acrylic finishing coat with good gloss and colour retention. It is resistant to water and spillage of aliphatic hydrocarbonsFor professional use only Finishing coat for protection of structural steel in severely corrosive environment, where light-fastness and gloss retention...
£102.59 (incl. VAT)
£85.49 (ex. VAT)
Hempatex Enamel 56360 is a physically drying topcoat based on acrylic resin and non-chlorinated plasticizer for optimum gloss and colour retention. For professional use only Resistant to salt water, splashes of aliphatic hydrocarbons and animal and vegetable oils Finishing coat in Hempatex systems in moderately to severely corrosive...
£51.58 (incl. VAT)
£42.98 (ex. VAT)
Versiline CUI 56990 is a MIO pigmented, fibre reinforced, inorganic co-polymer coating that cures to an inert polymer matrix, able to resist temperatures up to 650°C and thermal shock/cycling in dry or dry/wet service.For professional use only Recommended for long term protection of hot pipework, equipment and other hot surfaces....
£332.35 (incl. VAT)
£276.96 (ex. VAT)
Hempadur Avantguard 550 is an activated, zinc epoxy primer with a higher mechanical strength. Recommended as a versatile primer for long-term protection of steel in severely corrosive environments.For professional use only Service temperature up to 160°C (dry exposure), and cures down to -10°C In compliance with the requirements of...
£276.84 (incl. VAT)
£230.70 (ex. VAT)
Hempadur Avantguard 750 is an activated, zinc epoxy primer with a higher mechanical strength. Recommended as a versatile primer for long-term protection of steel in severely corrosive environments including offshore.For professional use only Service temperature up to 160°C (dry exposure), and cures down to -10°C In compliance with the...
£332.41 (incl. VAT)
£277.01 (ex. VAT)
Hempel's Shopprimer E 15280 is a two-component epoxy primer, pigmented with zinc phosphate rust-inhibiting pigments. It is designed for automatic spray application as well as manual application.For professional use only Shopprimer for protection of blast cleaned steel plate and other structural steel during the storage and building...
£174.20 (incl. VAT)
£145.17 (ex. VAT)
Sub-category links
Filter By
Brand
Brand
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Usages
Usages
Base Type
Base Type
Application Method
Application Method
Touch Dry (at 20°C)
Touch Dry (at 20°C)
Industry Approved System
Industry Approved System
Non - Isocyanate
Non - Isocyanate
Metal primers and rust-inhibiting undercoats provide the crucial stage to any major maintenance, renovation and metal restoration work. Whether it is for cladding, roofing, floors, mezzanines, helipads, steel and cast-iron structures, or oil tankers, metal primers are available to buy here today, in combination with other products and topcoats required to finish a major build or small project, in almost any working and environmental conditions.
Direct to metal paints are the quickest and easiest way to cover rust, or deliver high-quality finishes to areas with minimal surface preparation. Some of the better known direct-to-metal products include coatings from Rust-Oleum’s CombiColor and Noxyde ranges.
Metal topcoat finishes can either be used to complete full paint systems, or refinish any maintenance or repair work that has been done. Aluminium paints, high-gloss finishes for increased durability in high-humidity environments, enamel and gold-effect or metallic finishes are popular specialist metal topcoats that deliver much improved results over standard coatings.
Heat resistant paints for metal are not the same as intumescent paints for steel. Heat resistant paints have been specifically designed to withstand high-heat temperatures up-to 750°C – for use on chimneys, pipes, engines, log-burners, and exhaust pipes, etc. They will not break down under duress of high-temperatures, and the products available to buy today at Rawlins Paints are designed for commercial and industrial use.
Metal cladding paints can rejuvenate and re-colour aged and weathered cladding. As businesses re-brand, so do colour schemes – which using a high-quality metal cladding paint can mean that the façade to a business property can be relaunched extremely quickly.
Teamac, International, Jotun and Sherwin-Williams are amongst the specialist manufacturers producing high-grade marine paints and coatings for boats, yachts, cruisers, trawlers, etc. These metal paints are designed to protect metal surfaces in submerged environments, and even in ice-cold Arctic conditions.
Whilst many metal paints can be applied by brush, roller and spray, Rawlins Paints also stock aerosols for use on metal and metallic surfaces and substrates – from primers to topcoats. Rust-Oleum Hard Hat Topcoats are the number 1 best-selling industrial aerosols for metal, delivering high-quality gloss finishes with superb colour retention.
In more extreme corrosive and industrial environments, including power stations, oil refineries, pulp and paper plants, gas pipe infrastructures, chemical processing plants, aviation sites and hangers, low temperature coatings may be required. Tank coatings and linings available also provide industrial solutions for internal and external surfaces of tanks storing gas, water or aviation fuel. A wide range of metal paints do provide above standard chemical resistance, but the range of specialist chemically resistant coatings also available at Rawlins Paints offer extreme protection to concrete, metal and other building and storage facility substrates dealing with corrosive chemicals, acids and materials on a daily basis.
Easy Maintenance
A series of easy to use products that require no specialist skills to apply, for day-to-day maintenance of metal. The products require minimal surface preparation, are quick drying and are usually sufficient with just one or two coats.
High Performance
This range offers products that offer longer term protection against more demanding conditions such as, extreme corrosion, chemicals, impact and abrasion, coastal environments, etc. These systems often include multiple coats and products, more stringent preparation requirements and more need for care to be taken over application.
Our help and advice promise
Call our Technical Team to discuss which area your project falls into and what product(s) will be best for you. Site visits can be carried out for larger projects so a full specification can be produced in writing, which will be tailored to meet the projects requirements. Data sheets and advice are always freely available to help you with your project.
