Sub-category links
Filter By
Brand
Brand
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Usages
Usages
Base Type
Base Type
Application Method
Application Method
Touch Dry (at 20°C)
Touch Dry (at 20°C)
Industry Approved System
Industry Approved System
Non - Isocyanate
Non - Isocyanate
There are 859 products.
Active filters
Hempel's Speed-Dry Alkyd 43140 is a very quick-drying anticorrosive primer/finish pigmented with zinc phosphate as anticorrosive inhibiting pigment. Single/double coat anticorrosive primer/finish for steel structures, general steel work and a multitude of applications for heavy and light steel industry, where quick drying properties are...
£40.10 (incl. VAT)
£33.42 (ex. VAT)
Hempadur 45143 is a two-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability. It is selfpriming and forms a hard and tough coating which has good resistance against abrasion and impact as well as to seawater, mineral oils, aliphatic hydrocarbons and splashes from petrol and related products....
£54.46 (incl. VAT)
£45.38 (ex. VAT)
Hempadur Multi-Strength 45540 is a two component pure epoxy paint which cures to an abrasion and corrosion resistant coating. Applicable by standard heavy duty airless spray equipment. Well suited for application under humid conditions and for early water exposure.For professional use only Maintenance and repair primer in Hempadur systems...
£281.94 (incl. VAT)
£234.95 (ex. VAT)
Hempadur 47140 is a two-component polyamide adducts cured, high build epoxy paint which combines a relatively high volume solids content with a short drying time. VOC compliant.For professional use only Primer for mild to medium atmospheric environments, or intermediate/finishing coat for epoxy systems in medium to severely corrosive...
£158.15 (incl. VAT)
£131.79 (ex. VAT)
Hempadur 47200 is a two-component, polyamine adduct cured epoxy paint with a very short drying time. Contains micaceous iron oxide and zinc phosphate. The product cures at temperatures above -10°C and forms a tough and hardwearing coating.For professional use only Fast drying primer or intermediate coat in Hempadur systems especially...
£54.43 (incl. VAT)
£45.36 (ex. VAT)
Hempadur ZP 47940 is a two-component polyamide adduct cured, high build epoxy paint which combines a relatively high volume solids content with a short drying time. Pigmented with zincphosphate.For professional use only For use as a primer in epoxy systems in atmospheric exposure Service temperature: up to 140°C (dry exposure)More...
£263.59 (incl. VAT)
£219.66 (ex. VAT)
Hempadur MIO 47950 is a two-component polyamide adduct cured, high build epoxy paint which combines a relatively high volume solids content with a short drying time. Has a high load of MIO-pigment.For professional use only For use as an intermediate or finishing coat in epoxy systems in atmospheric exposure Service temperature: up to...
£67.63 (incl. VAT)
£56.36 (ex. VAT)
Hempaquick Enamel 53840 is a quick drying alkyd enamel with good gloss and colour retention. Recommended use as a topcoat on steel in mild to moderately corrosive environments. In case of line application of small items to be packed together, Hempalin Enamel 52140 is recommended. For professional use only.More Information Delivery Info...
£58.46 (incl. VAT)
£48.72 (ex. VAT)
Hempathane HS 55810 is a two-component polyurethane topcoat, cured with aliphatic isocyanate, with very good gloss and colour retention. Recommended use as a low VOC finishing coat for protection of structural steel in severely corrosive atmospheric environment. For professional use onlyMore Information Delivery Info
£83.11 (incl. VAT)
£69.26 (ex. VAT)
Hempel's Speed-Dry Primer 13770 is a quick drying alkyd primer, containing zinc phosphate to enhance the anti-corrosion properties.For professional use only Service temperature up to 120°C (dry exposure only) Complies with the European Fire Standard EN 13501-1, fire reaction class: B-s1, d0. General purpose primer for protection of...
£31.52 (incl. VAT)
£26.27 (ex. VAT)
Cromadex 750 Two Pack Epoxy Primer Rapid is a fast-drying two pack epoxy primer for use over a wide range of substrates. It contains zinc phosphate giving added corrosion resistance for greater durability. The product can be air dried or stoved giving flexibility in production. It is available in white and grey as standard, it can also be...
£185.44 (incl. VAT)
£154.53 (ex. VAT)
Hempathane Topcoat 55213 is a two-component, semi-flat/semi-gloss acrylic polyurethane coating with good gloss and colour retention. Recommended use as a finishing coat for protection of stuctural steel in severely corrosive atmospheric environment, where light-fastness and gloss retention are required.Please note: This product is subject...
£286.51 (incl. VAT)
£238.76 (ex. VAT)
Sub-category links
Filter By
Brand
Brand
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Usages
Usages
Base Type
Base Type
Application Method
Application Method
Touch Dry (at 20°C)
Touch Dry (at 20°C)
Industry Approved System
Industry Approved System
Non - Isocyanate
Non - Isocyanate
Metal primers and rust-inhibiting undercoats provide the crucial stage to any major maintenance, renovation and metal restoration work. Whether it is for cladding, roofing, floors, mezzanines, helipads, steel and cast-iron structures, or oil tankers, metal primers are available to buy here today, in combination with other products and topcoats required to finish a major build or small project, in almost any working and environmental conditions.
Direct to metal paints are the quickest and easiest way to cover rust, or deliver high-quality finishes to areas with minimal surface preparation. Some of the better known direct-to-metal products include coatings from Rust-Oleum’s CombiColor and Noxyde ranges.
Metal topcoat finishes can either be used to complete full paint systems, or refinish any maintenance or repair work that has been done. Aluminium paints, high-gloss finishes for increased durability in high-humidity environments, enamel and gold-effect or metallic finishes are popular specialist metal topcoats that deliver much improved results over standard coatings.
Heat resistant paints for metal are not the same as intumescent paints for steel. Heat resistant paints have been specifically designed to withstand high-heat temperatures up-to 750°C – for use on chimneys, pipes, engines, log-burners, and exhaust pipes, etc. They will not break down under duress of high-temperatures, and the products available to buy today at Rawlins Paints are designed for commercial and industrial use.
Metal cladding paints can rejuvenate and re-colour aged and weathered cladding. As businesses re-brand, so do colour schemes – which using a high-quality metal cladding paint can mean that the façade to a business property can be relaunched extremely quickly.
Teamac, International, Jotun and Sherwin-Williams are amongst the specialist manufacturers producing high-grade marine paints and coatings for boats, yachts, cruisers, trawlers, etc. These metal paints are designed to protect metal surfaces in submerged environments, and even in ice-cold Arctic conditions.
Whilst many metal paints can be applied by brush, roller and spray, Rawlins Paints also stock aerosols for use on metal and metallic surfaces and substrates – from primers to topcoats. Rust-Oleum Hard Hat Topcoats are the number 1 best-selling industrial aerosols for metal, delivering high-quality gloss finishes with superb colour retention.
In more extreme corrosive and industrial environments, including power stations, oil refineries, pulp and paper plants, gas pipe infrastructures, chemical processing plants, aviation sites and hangers, low temperature coatings may be required. Tank coatings and linings available also provide industrial solutions for internal and external surfaces of tanks storing gas, water or aviation fuel. A wide range of metal paints do provide above standard chemical resistance, but the range of specialist chemically resistant coatings also available at Rawlins Paints offer extreme protection to concrete, metal and other building and storage facility substrates dealing with corrosive chemicals, acids and materials on a daily basis.
Easy Maintenance
A series of easy to use products that require no specialist skills to apply, for day-to-day maintenance of metal. The products require minimal surface preparation, are quick drying and are usually sufficient with just one or two coats.
High Performance
This range offers products that offer longer term protection against more demanding conditions such as, extreme corrosion, chemicals, impact and abrasion, coastal environments, etc. These systems often include multiple coats and products, more stringent preparation requirements and more need for care to be taken over application.
Our help and advice promise
Call our Technical Team to discuss which area your project falls into and what product(s) will be best for you. Site visits can be carried out for larger projects so a full specification can be produced in writing, which will be tailored to meet the projects requirements. Data sheets and advice are always freely available to help you with your project.
