Sub-category links
Filter By
Brand
Brand
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Usages
Usages
Base Type
Base Type
Application Method
Application Method
Touch Dry (at 20°C)
Touch Dry (at 20°C)
Industry Approved System
Industry Approved System
Non - Isocyanate
Non - Isocyanate
There are 859 products.
Active filters
Bradite Fastrac Rust Converter is a high performance, single-pack, water-based rust converter intended for the treatment and passivation of surface rust on all hand or mechanically prepared rusty ferrous surfaces.Especially suited for objects which may be difficult to sand blast such as; fences, iron railings, guttering and outdoor...
£45.08 (incl. VAT)
£37.57 (ex. VAT)
Formerly known as "Protega HT600" - a heat resistant, silicone resin based single pack finish suitable for all types of manifold and exhaust systems. Good heat resistance properties up to 500℃ depending on quality, intermittent heat resistance up to 600℃ Good petrol and oil resistance Good performance in salt spray and humidity testing...
£92.80 (incl. VAT)
£77.33 (ex. VAT)
A high build 2K Polyurethane Primer which can be used Wet on Wet. Designed to provide adhesion and corrosion protection on steel substrates for ACE (Agricultural and Construction Equipment) markets.Quick drying Spray or pressure-pot application Part of the CFB 2K SystemMore Information Delivery Info
£220.19 (incl. VAT)
£183.49 (ex. VAT)
A high gloss polyurethane topcoat, offering excellent gloss retention and resistance to chemical and atmospheric attack.Base only; must be purchased and mixed with one of Hardener 9004 Standard, Hardener 9027 Wintermix, or Hardener 9018 before useSelect from the drop-down menus belowQuick drying Spray or pressure-pot application...
£292.63 (incl. VAT)
£243.86 (ex. VAT)
Durable and heat resistant, turn your radiator into a stylish accent or give it a new lease of life with a long lasting, incredible depth of colour. This easy to apply, high pigment radiator paint provides long-lasting coverage in a beautiful matt finish.Easy to apply by brush or roller For horizontal, vertical and column radiators,...
£17.44 (incl. VAT)
£14.53 (ex. VAT)
Flag White Satin Wood & Metal Paint is a white, water based, quick drying topcoat. Suitable for internal application on a wide variety of primed surfaces.Can be applied over most types of water based paints Provides a long-lasting durable and washable finishMore Information Delivery Info
£24.70 (incl. VAT)
£20.58 (ex. VAT)
Makes the smoothest surface coatable! Rust-Oleum 3302 CombiPrimer Adhesion should be used on galvanised steel, stainless steel, aluminium, copper, glass, porcelain and other smooth, dense surfaces followed by Rust-Oleum CombiColor Original or Rust-Oleum CombiColor Multi-Surface.Easy to apply by brush Transparent blue finish Recoatable...
£9.62 (incl. VAT)
£8.02 (ex. VAT)
Hempalin Primer Hi-Build 13200 is a quick-drying, urethane-modified alkyd primer.General purpose primer for Hempalin systems for protection of steel in mild to medium atmospheric corrosive environments. Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory i.For...
£195.12 (incl. VAT)
£162.60 (ex. VAT)
Hempadur 17940 is a two-component polyamide adduct-cured epoxy paint. It cures to a flexible, well adhering coating. Contains aluminium.Sealer for Hempadur systems on aluminium/zinc metal sprayed substrate in atmospheric exposure Service temperature: - Maximum, dry exposure only: 140°CFor professional use only. More Information...
£218.70 (incl. VAT)
£182.25 (ex. VAT)
Hempadur Multi-Strength 35840 is a solvent-free, two-component, high-build, polyamine adduct cured glass flake containing epoxy paint, which cures to a hard and tough coating with good resistance to abrasion, seawater and fresh water.Self-primed, high build coating for areas subject to a highly corrosive environment Can be used on...
£101.26 (incl. VAT)
£84.38 (ex. VAT)
Hempel's Speed-Dry Alkyd 43141 is a quick-drying anticorrosive single layer or finish coat pigmented with zinc phosphate as anticorrosive inhibiting pigment. Anticorrosive single layer coat for steel structures, general steel work and a multitude of applications for heavy and light steel industry, where quick drying properties are required...
£48.16 (incl. VAT)
£40.13 (ex. VAT)
Hemucryl 48120 is a high-build, flexible, water-borne, acrylic dispersion based paint. Contains zinc phosphate as anticorrosive pigment. It dries to a tough and corrosion protecting coating.Especially suited for application by airless spray Direct-to-metal coat in water-borne paint systems, ie. under bridgesFor professional use only....
£297.00 (incl. VAT)
£247.50 (ex. VAT)
Sub-category links
Filter By
Brand
Brand
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Usages
Usages
Base Type
Base Type
Application Method
Application Method
Touch Dry (at 20°C)
Touch Dry (at 20°C)
Industry Approved System
Industry Approved System
Non - Isocyanate
Non - Isocyanate
Metal primers and rust-inhibiting undercoats provide the crucial stage to any major maintenance, renovation and metal restoration work. Whether it is for cladding, roofing, floors, mezzanines, helipads, steel and cast-iron structures, or oil tankers, metal primers are available to buy here today, in combination with other products and topcoats required to finish a major build or small project, in almost any working and environmental conditions.
Direct to metal paints are the quickest and easiest way to cover rust, or deliver high-quality finishes to areas with minimal surface preparation. Some of the better known direct-to-metal products include coatings from Rust-Oleum’s CombiColor and Noxyde ranges.
Metal topcoat finishes can either be used to complete full paint systems, or refinish any maintenance or repair work that has been done. Aluminium paints, high-gloss finishes for increased durability in high-humidity environments, enamel and gold-effect or metallic finishes are popular specialist metal topcoats that deliver much improved results over standard coatings.
Heat resistant paints for metal are not the same as intumescent paints for steel. Heat resistant paints have been specifically designed to withstand high-heat temperatures up-to 750°C – for use on chimneys, pipes, engines, log-burners, and exhaust pipes, etc. They will not break down under duress of high-temperatures, and the products available to buy today at Rawlins Paints are designed for commercial and industrial use.
Metal cladding paints can rejuvenate and re-colour aged and weathered cladding. As businesses re-brand, so do colour schemes – which using a high-quality metal cladding paint can mean that the façade to a business property can be relaunched extremely quickly.
Teamac, International, Jotun and Sherwin-Williams are amongst the specialist manufacturers producing high-grade marine paints and coatings for boats, yachts, cruisers, trawlers, etc. These metal paints are designed to protect metal surfaces in submerged environments, and even in ice-cold Arctic conditions.
Whilst many metal paints can be applied by brush, roller and spray, Rawlins Paints also stock aerosols for use on metal and metallic surfaces and substrates – from primers to topcoats. Rust-Oleum Hard Hat Topcoats are the number 1 best-selling industrial aerosols for metal, delivering high-quality gloss finishes with superb colour retention.
In more extreme corrosive and industrial environments, including power stations, oil refineries, pulp and paper plants, gas pipe infrastructures, chemical processing plants, aviation sites and hangers, low temperature coatings may be required. Tank coatings and linings available also provide industrial solutions for internal and external surfaces of tanks storing gas, water or aviation fuel. A wide range of metal paints do provide above standard chemical resistance, but the range of specialist chemically resistant coatings also available at Rawlins Paints offer extreme protection to concrete, metal and other building and storage facility substrates dealing with corrosive chemicals, acids and materials on a daily basis.
Easy Maintenance
A series of easy to use products that require no specialist skills to apply, for day-to-day maintenance of metal. The products require minimal surface preparation, are quick drying and are usually sufficient with just one or two coats.
High Performance
This range offers products that offer longer term protection against more demanding conditions such as, extreme corrosion, chemicals, impact and abrasion, coastal environments, etc. These systems often include multiple coats and products, more stringent preparation requirements and more need for care to be taken over application.
Our help and advice promise
Call our Technical Team to discuss which area your project falls into and what product(s) will be best for you. Site visits can be carried out for larger projects so a full specification can be produced in writing, which will be tailored to meet the projects requirements. Data sheets and advice are always freely available to help you with your project.
