Sub-category links

Filter By

Brand

Brand

Colour Family

Colour Family

Suitable For Use On

Suitable For Use On

Usages

Usages

Base Type

Base Type

Application Method

Application Method

Touch Dry (at 20°C)

Touch Dry (at 20°C)

Non - Isocyanate

Non - Isocyanate

Need Help?

Metal Paints

Rawlins Paints’ stocked metal paints have increased considerably in volume through 2020-2021, as more industry standard coatings from Ardenbrite, Blackfriar, Coo-Var, International, Jotun, Mathys, Nullifire, Rust-Oleum, Sherwin-Williams, Sika, Solignum, Teamac and more are now available to buy online, all with next day delivery. It is one of the widest product and manufacturer selections available in the UK, with industrial metal paints and coatings suitable for cladding, structural steel, heat resistant purposes, priming new construction materials, delivering anti-corrosive protection to marine and off-shore environments, tank and pipe lining coatings, and treating and covering rust.

So, if you require unbeatable colour retention, chemical resistance, UV protection, low-temperature applied metal paints and coatings, amongst other criteria, find the best product today, at Rawlins Paints.

There are 67 products.

Showing 1-12 of 67 item(s)

Active filters

  • Brand: International

International Intercryl 525

International Intercryl 525 is designed for use as a primer/finish for structural steel, in a wide variety of general industrial environments of light to moderate corrosivity, including on bridges, commercial buildings, infrastructure and manufacturing plants.Excellent colour and gloss retention 4,800+ colours, inc. RAL, RAL Design &...

Price £359.38 (ex. VAT)
In Stock and Available for Delivery

International Intercure 99

As a single coat polyaspartic primer finish, International Intercure 99 can replace two coat systems for ISO 12944 C3 environments. Drying hard in 1½ hours at 25ºC, International Intercure 99 can increase productivity, reduce VOC levels and provide anti-corrosive protection with long lasting aesthetics.High solids polyaspartic Single coat...

Price £699.99 (ex. VAT)
In Stock and Available for Delivery

International Intercure 200

International Intercure 200 is a two component epoxy zinc phosphate/micaceous iron oxide primer, formulated on proprietary polymer technology, which provides rapid cure and overcoating even under low temperature conditions. A high solids, low VOC product.As a primer for steelwork intended for use in a wide range of aggressive environments,...

Price £288.64 (ex. VAT)
In Stock and Available for Delivery

International Intercure 200HS

A fast drying reputation isn`t all International Intercure 200HS is renowned for. Complete with MIO, this fast cure anti-corrosive primer/intermediate with added barrier protection, can improve your productivity and lower your solvent emissions.Primer and intermediate in just one coat Rapid recoat times Low temperature cure, cures down...

Price £482.47 (ex. VAT)
In Stock and Available for Delivery

International Intercure 324

International Intercure 324 is a two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.Excellent barrier protection Low temperature cure and Rapid overcoating properties Pigmented with zinc phosphate anti-corrosive pigment to comply with the requirements of BS5493:1977Coverage Calculator More...

Price £93.20 (ex. VAT)
In Stock and Available for Delivery

International Intercure 384

International Intercure 384 is a two component, high solids, low VOC epoxy micaceous iron oxide intermediate coating offering excellent barrier protection, low temperature cure and rapid overcoating properties. Pigmented with micaceous iron oxide to comply with the requirements of BS5493:1977As a high build intermediate to provide...

Price £109.73 (ex. VAT)
In Stock and Available for Delivery

International Intercure 420

International Intercure 420 is a two component, high solids, low VOC epoxy micaceous iron oxide coating formulated on proprietary polymer technology which provides rapid cure and overcoating even under low temperature conditions.Excellent barrier protection as part of a high performance system Suitable for use in aggressive environments...

Price £303.13 (ex. VAT)
In Stock and Available for Delivery

International Interfine 629HS

International Interfine 629HS is a low VOC, high performance, two component, isocyanate free crosslinking acrylic finish which provides good durability in terms of colour and gloss retention.Designed as a finish coat for use in both new construction and industrial maintenance. For use in a wide variety of aggressive environments including...

Price £128.49 (ex. VAT)
In Stock and Available for Delivery

International Interfine 691

International Interfine 691 is a two pack, epoxy acrylic isocyanate free cosmetic finish providing good long term durability. International Interfine 691 offers equivalent performance to typical recoatable polyurethane cosmetic finishes.Designed as a finish coat for use in both new construction and industrial maintenance. For use in a wide...

Price £123.14 (ex. VAT)
In Stock and Available for Delivery

International Interfine 878

International Interfine 878 is a high performance, two component, high solids finish which contains no free isocyanates, offers compliance to current VOC legislation, and affords extended lifetime to first maintenance when utilised as part of a high performance anticorrosive system.A step change in long term colour and gloss compared to...

Price £365.72 (ex. VAT)
In Stock and Available for Delivery

International Interfine 979

International Interfine 979 significantly improves upon the gloss and colour retention exhibited by typical polyurethane finishes also displays the same corrosion resistance and has enhanced mechanical properties when compared to traditional epoxy technology.Excellent long term color and gloss retention Contains no free isocyanate Low...

Price £1,303.08 (ex. VAT)
In Stock and Available for Delivery

International Intergard 214

International Intergard 214 is a two component epoxy sealer coat pigmented with aluminium flake for the effective penetration and sealing of thermally sprayed aluminium coatings to eliminate porosity. Has specification approval for UK Department of Transport Item No.159. Coverage Calculator More Information Delivery Info

Price £83.55 (ex. VAT)
In Stock and Available for Delivery

Sub-category links

Filter By

Brand

Brand

Colour Family

Colour Family

Suitable For Use On

Suitable For Use On

Usages

Usages

Base Type

Base Type

Application Method

Application Method

Touch Dry (at 20°C)

Touch Dry (at 20°C)

Non - Isocyanate

Non - Isocyanate

Need Help?

Need Help?

Metal primers and rust-inhibiting undercoats provide the crucial stage to any major maintenance, renovation and metal restoration work. Whether it is for cladding, roofing, floors, mezzanines, helipads, steel and cast-iron structures, or oil tankers, metal primers are available to buy here today, in combination with other products and topcoats required to finish a major build or small project, in almost any working and environmental conditions.

Direct to metal paints are the quickest and easiest way to cover rust, or deliver high-quality finishes to areas with minimal surface preparation. Some of the better known direct-to-metal products include coatings from Rust-Oleum’s CombiColor and Noxyde ranges.

Metal topcoat finishes can either be used to complete full paint systems, or refinish any maintenance or repair work that has been done. Aluminium paints, high-gloss finishes for increased durability in high-humidity environments, enamel and gold-effect or metallic finishes are popular specialist metal topcoats that deliver much improved results over standard coatings.

Heat resistant paints for metal are not the same as intumescent paints for steel. Heat resistant paints have been specifically designed to withstand high-heat temperatures up-to 750°C – for use on chimneys, pipes, engines, log-burners, and exhaust pipes, etc. They will not break down under duress of high-temperatures, and the products available to buy today at Rawlins Paints are designed for commercial and industrial use.

Metal cladding paints can rejuvenate and re-colour aged and weathered cladding. As businesses re-brand, so do colour schemes – which using a high-quality metal cladding paint can mean that the façade to a business property can be relaunched extremely quickly.

Teamac, International, Jotun and Sherwin-Williams are amongst the specialist manufacturers producing high-grade marine paints and coatings for boats, yachts, cruisers, trawlers, etc. These metal paints are designed to protect metal surfaces in submerged environments, and even in ice-cold Arctic conditions.

Whilst many metal paints can be applied by brush, roller and spray, Rawlins Paints also stock aerosols for use on metal and metallic surfaces and substrates – from primers to topcoats. Rust-Oleum Hard Hat Topcoats are the number 1 best-selling industrial aerosols for metal, delivering high-quality gloss finishes with superb colour retention.

In more extreme corrosive and industrial environments, including power stations, oil refineries, pulp and paper plants, gas pipe infrastructures, chemical processing plants, aviation sites and hangers, low temperature coatings may be required. Tank coatings and linings available also provide industrial solutions for internal and external surfaces of tanks storing gas, water or aviation fuel. A wide range of metal paints do provide above standard chemical resistance, but the range of specialist chemically resistant coatings also available at Rawlins Paints offer extreme protection to concrete, metal and other building and storage facility substrates dealing with corrosive chemicals, acids and materials on a daily basis.

Easy Maintenance
A series of easy to use products that require no specialist skills to apply, for day-to-day maintenance of metal. The products require minimal surface preparation, are quick drying and are usually sufficient with just one or two coats.

High Performance
This range offers products that offer longer term protection against more demanding conditions such as, extreme corrosion, chemicals, impact and abrasion, coastal environments, etc. These systems often include multiple coats and products, more stringent preparation requirements and more need for care to be taken over application.

Our help and advice promise
Call our Technical Team to discuss which area your project falls into and what product(s) will be best for you. Site visits can be carried out for larger projects so a full specification can be produced in writing, which will be tailored to meet the projects requirements. Data sheets and advice are always freely available to help you with your project.