Sub-category links
Filter By
Fastest Delivery
Fastest Delivery
Brand
Brand
For Use By
For Use By
Product Range
Product Range
Suitable For Use On
Suitable For Use On
Usages
Usages
Interior / Exterior Use
Interior / Exterior Use
Single, Two or Three Pack
Single, Two or Three Pack
Min. Application Temperature
Min. Application Temperature
Dry to Recoat (@ 20-25°C)
Dry to Recoat (@ 20-25°C)
Product Usage Type
Product Usage Type
Colour Family
Colour Family
Base Type
Base Type
Application Method
Application Method
Finish
Finish
There are 343 products.
Active filters
Jotun Penguard Primer is a two component polyamide cured high molecular weight epoxy coating designed as a primer for new construction. It can be used as a primer as a part of a complete system in atmospheric and immersed environments. Suitable for properly prepared carbon steel, stainless steel, aluminium, concrete, galvanised steel, shop...
£56.63 (incl. VAT)
£47.19 (ex. VAT)
Jotun Penguard Tie Coat 100 is a two component polyamide cured high molecular weight epoxy coating specially designed as a tie coat/sealer on top of inorganic zinc silicate primers, galvanised steel and thermally sprayed zinc. To be used as a primer in a complete system in atmospheric environments. Recommended for offshore environments,...
£279.84 (incl. VAT)
£233.20 (ex. VAT)
Jotun Penguard Midcoat MIO is a two component polyamide cured epoxy coating that is a micaceous iron oxide (MIO) pigmented, high solids, high build product. Designed as a mid coat in systems for new construction in atmospheric environments. Suitable in approved coating systems. Coverage Calculator More Information Delivery Info
£269.04 (incl. VAT)
£224.20 (ex. VAT)
Jotun Penguard Midcoat is suitable for structural steel and piping to be exposed to corrosive environments up to very high. Recommended for offshore environments, refineries, power plants, bridges, buildings and mining equipment. A high solids, high build product designed as a mid coat in systems for new construction in atmospheric...
£269.04 (incl. VAT)
£224.20 (ex. VAT)
Jotun Penguard HSP is a two component polyamide cured epoxy coating that is fast drying, high solids and high build. This Jotun product can be used as a primer or mid coat in atmospheric environments, specially designed for new construction where fast dry to handle and over coating times are required. Coverage Calculator More Information...
£209.47 (incl. VAT)
£174.56 (ex. VAT)
Jotun Penguard HSP ZP is a two component polyamide cured epoxy coating that is a fast drying, zinc phosphate pigmented, high solids, high build product. Specially designed for new construction where fast dry to handle and over coating times are required. To be used as a primer in atmospheric environments and is suitable for properly prepared...
£163.08 (incl. VAT)
£135.90 (ex. VAT)
Jotun Penguard HSP MIO is a two component polyamide cured epoxy coating that is a fast drying, micaceous iron oxide (MIO) pigmented, high solids, high build product. Can be used as a primer or a mid coat in atmospheric environments. Specially designed for new construction where fast dry to handle and over coating times are required. *Red,...
£210.84 (incl. VAT)
£175.70 (ex. VAT)
Jotun Penguard Express is a two component amine cured epoxy coating that is fast drying, high solids and high build. It is specially designed for new construction where fast dry to handle and over coating times are required. Can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric environments. Coverage...
£54.08 (incl. VAT)
£45.07 (ex. VAT)
A two component amine cured epoxy coating that is a fast drying, zinc phosphate pigmented, high solids, high build product. Specially designed for new construction where fast dry to handle and over coating times are required. Can be used as a primer, mid coat, finish coat or as a single coat system in atmospheric environments.More Info...
£72.12 (incl. VAT)
£60.10 (ex. VAT)
Jotun Penguard Express MIO is a two component amine cured epoxy coating that is a fast drying, micaceous iron oxide (MIO) pigmented, high solids, high build product. Specially designed for new construction where fast dry to handle and over coating times are required. Can be used as a primer, mid coat, finish coat or as a single coat system in...
£74.02 (incl. VAT)
£61.68 (ex. VAT)
Jotun Barrier is a two component polyamide cured zinc rich epoxy coating. From Jotun, this is a very high zinc dust containing product and it conforms to the compositional requirements of SSPC paint 20, level 2. Jotun Barrier provides very good corrosion protection as part of a complete coating system. To be used as primer in atmospheric...
£124.81 (incl. VAT)
£104.01 (ex. VAT)
From Jotun, this primer is for structural steel and piping in highly corrosive environments, ideal for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel. Jotun Barrier 77 is a two component polyamide cured zinc rich epoxy coating. Coverage Calculator More Information Delivery...
£238.58 (incl. VAT)
£198.82 (ex. VAT)
Sub-category links
Filter By
Fastest Delivery
Fastest Delivery
Brand
Brand
For Use By
For Use By
Product Range
Product Range
Suitable For Use On
Suitable For Use On
Usages
Usages
Interior / Exterior Use
Interior / Exterior Use
Single, Two or Three Pack
Single, Two or Three Pack
Min. Application Temperature
Min. Application Temperature
Dry to Recoat (@ 20-25°C)
Dry to Recoat (@ 20-25°C)
Product Usage Type
Product Usage Type
Colour Family
Colour Family
Base Type
Base Type
Application Method
Application Method
Finish
Finish
Rawlins Paints stock over 150 metal primers and undercoats, for any scaled project or environment – no matter how extreme the weather conditions are for external application. These range from Rust-Oleum’s CombiPrimer products for smaller surface areas, to Jotun’s Penguard, Pilot and Barrier ranges for larger surface areas in less hospitable environments – such as offshore areas. With many factors determining which primer will be best suit requirements, these may include one or more of the following:
Each product page will contain at least one datasheet documenting touch-dry times, surface preparation requirements, storage and application cleaning advice, and when the primer can have additional product coatings applied. Incorrectly applied coatings on-top of the primer/undercoat can drastically jeopardise its protective, rust-inhibiting, chemically resistant properties – so always follow application guidelines in the datasheets.
Rawlins Paints’ blog features many articles detailing how rust-inhibiting primers work, full system installations from primers to topcoats, product recommendations for specialist or unusual environments, as well as topics including how to paint on or over stainless steel.
Metal primers may not always be required on a project, but will always remain a recommendation to improve surface and substrate protection, as well as extend the lifespan of the topcoat or full system installation.
A metal primer’s primary job is to stop the metal from getting wet, or coming into direct contact with any form of moisture, damp or humidity. Whilst some metals contain anti-corrosive materials (such as the addition of zinc – which oxidises first, before the metal substrate does), without using a primer as an added precaution, over time the paint system will age and may decay or begin to deteriorate. When this happens, oxidation will begin, and can quickly lead to rust forming on the surface. Flaking and peeling paint on a surface is most commonly caused from a primer not being used. Stripping back topcoats from metal that has begun to peel can be a large and expensive task – colours may fade on larger surface areas over time, and simply treating and recoating smaller areas is not a ‘colour matching’ option.
Please note that not all metal primers are rust-inhibiting. Some provide other forms of surface protection and topcoat/system installation preparation. Red oxide primers are rust-inhibitive and should be used on ferrous metals to prevent rust and substrate surface oxidisation.
