Sub-category links
Filter By
For Use By
For Use By
Product Range
Product Range
Suitable For Use On
Suitable For Use On
Product Type
Product Type
Fire Rating
Fire Rating
Usages
Usages
Colour Family
Colour Family
Interior / Exterior Use
Interior / Exterior Use
Single, Two or Three Pack
Single, Two or Three Pack
Base Type
Base Type
Application Method
Application Method
Finish
Finish
There are 51 products.
Active filters
Nullifire (Firetherm) FJ220 Intubatt 3 Cavity Barrier, a rock fibre compressible slab, with an ablative coating to provide a fire and smoke seal. Supplied pre-configured, ablative coated and factory cured.Choose from 2 options:Single coated for horizontal seals Double coated for vertical sealsLow cost and simple install Easy to...
Nullifire SC801 On-Site Water-Based Intumescent Basecoat is a water-based, white, thin film intumescent coating for the protection of internal structural steelwork, providing up to 120 minutes fire resistance. Please Note: We strongly recommend Tricomb Plastic Wet Film Gauges are used to help ensure correct film thicknesses are achieved...
Nullifire FJ203 Fire Resistant Backer Rod is a firestopping backer rod made from rock wool, sheathed with flexible glass wires. It is used to make fire-resistant expansion joints between masonry elements, wall and slab, directly exposed to fire or not, in hospitals, hotels, car parks, schools, airports, nuclear power plants etc.Can be used...
Nullifire (Firetherm) FS703 Intusil Fire Resistant Silicone Sealant, a fire-stopping sealant designed for aggressive exterior use on high-sheen surfaces (glass, aluminium) and in high-movement joints for up to 50% movement. Suitable to fire seal joints incompartment walls and floors such as masonry to masonry, masonry to timber, masonry to...
Nullifire (Firetherm) FB750 Intubatts are fully identifiable, fire resistant ablative skinned rock mineral wool boards used for fire protection of openings in fire barriers used for pipes and services to pass through.Refer to order references below Factory finished unique multilayered, low resin bonded, rock mineral fibre board Ablative...
Nullifire TS815 Solvent-Based Acrylic Top Seal is a single pack, high build modified acrylic topseal conforming to 2010 VOC limits. This product is designed for use with the Nullifire System S range of intumescent basecoats. Available in 4,300+ colours, inc. RAL, RAL Design, BS, NCS & the new NCS 2050 coloursMore Information...
Nullifire FC150 Solvent is suitable to use with Nullifire products & systems. Please refer to the datasheets for accurate information, or, alternatively, give our Technical Team a call.More Information Delivery Info
A modified, single component, fire rated polyurethane foam used to seal door frames and linear gaps throughout the fire rated areas of a building. This pink fire foam is easy to identify and cures to form a semi-rigid foam that can accommodate some degree of movement of the joint.Acts as an effective fire seal for up to 4 hours (BS EN...
Nullifire (Firetherm) FO142 Intutac bonds structural steel and ductwork protection boards in internal situations.Sodium silicate adhesive Bonds in 5 minutes Fully cured in 8 to 12 hours Forms a water-resistant seal unaffected by moisture Forms to a non-combustible film to BS 476 Part 4: 1970More Information Delivery Info
Nullifire (Firetherm) FS709 Intumastic HP Intumescent Sealant is a heat-reactive, intumescent acrylic fire barrier mastic for internal use around services in walls and floors.Seals around pipes, cables and cable trays Provides up to 4 hours of fire resistance 60 to 120 min tack time (depending on temperature/humidity)More...
Nullifire (Firetherm) FP302 Intustrap/Band is a rubber based product with graphite impregnation that creates an extremely flexible pipe closure device. The product remains dormant, until exposed to fire conditions, at which point it will expand to fill the space left by the melting combustible element. FP302 has a release tape to one side....
Nullifire (Firetherm) FI025 Intuflex Wrap, an insulated pipe and cable wrap for preventing heat exchange in pipes and cable trays through fire barriers, walls and floors.For steel pipes, cable trays, cable ladders, cable baskets, steel trunking and movement sleeves Can be cut for better accommodation, if requiredMore Information...
Sub-category links
Filter By
For Use By
For Use By
Product Range
Product Range
Suitable For Use On
Suitable For Use On
Product Type
Product Type
Fire Rating
Fire Rating
Usages
Usages
Colour Family
Colour Family
Interior / Exterior Use
Interior / Exterior Use
Single, Two or Three Pack
Single, Two or Three Pack
Base Type
Base Type
Application Method
Application Method
Finish
Finish
Nullifire are a leading name with some of the UK’s leading passive fire protection products – dubbed Smart Protection. These excellent products available to buy at Rawlins Paints have one mission – to protect people and buildings from the devastating effects of fire. Growing from strength to strength over 40 years, Nullifire are market leaders in intumescent and fire stopping solutions, and we are proud to distribute their products at rawlinspaints.com
Passive fire protection may be a new term to some – who may be more acquainted to active fire protection products, inclusive of fire blankets, fire extinguishers and sprinkler systems - but at Rawlins Paints, it is a crucially important term. In 2017, as architectural designs – industrial, factory and commercial buildings - become more sophisticated, with highly developed interior and exterior structures, it is imperative that passive fire protection models can ‘step up to the mark’ and surpass safety expectations and legal fire certification requirements. Nullifire understand that customers and clients expect that their confidence in passive fire protection systems is met when installed in modern buildings, so they have provided a wide range of product systems that will perform precisely when they are called upon. The full range available to buy here today include simple solutions (complexly developed), that will provide the optimum solution for every project’s bespoke requirements.
Passive fire protection products include:
Nullifire began life as pioneers in water-based paints and coating technology -which they continue to excel in to this day. Success stories include fast track intumescent coatings that can be applied quicker, at lower temperatures, and in higher humidity, which will save the customer up to an incredible 60% on application and drying times.
Rawlins Paints are available by phone or email to offer full support across Nullifire’s passive fire protection range, and with our team of technical experts, we can help you meet the specifications required and with installation of these products.
