The Nu-Flame Fire Upgrade paint system has been developed for the over-coating of multi layered paints for areas without the need to strip the current paint. This Timber pack is ideal for doors and skirting. Advantages All packs achieve BS Class 1/0 Surface Spread of Flame protection For interior use only
Thermoguard Fire Varnish BS Class 1/0 & EN Class B s2 d0 System is a clear fire retardant varnish for interior and exterior timber surfaces. ADVANTAGES Clear or stained finish Tough/Durable finish UV and wear protection (Matt & Satin) Enhances natural beauty
Macropoxy 400 (formerly known as Sherwin-Williams Macropoxy C400V3) multi-functional epoxy zinc phosphate coating is suitable for the protection of steelwork in a range of exposure environments from C1 to C5. It was recently used on The Shard for corrosion protection. Recommended Uses Buildings Car parks Petrochemical plants Breweries...
Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron: Up to 90 minutes’ fire resistance Can be overcoated with compatible decorative topcoat Water-based Low odour Environmentally friendly Cost effective for large projects Certificate of supply available on request Can be applied by brush,...
This category focuses on paints and coatings that can specifically be used on high heat (to touch) pipework. Suitable for a wide range of commercial and industrial environments, from interior radiators to off-shore industrial tanks, if you are unsure of which product best suits and meets your requirements, contact a member of our Technical Support Team on 0113 245 5450.
There is a large selection of features and benefits to choose from with these products, such as aluminium, zinc, and titanium-based coatings, single coat applications, or primers, mid coats and top coats for complete metal system and corrosion protection, as well as self-priming, multi-polymeric components.
If you are looking from a product from a manufacturer we stock at Rawlins Paints, but can't find it on our site, please contact us and we will source and locate it for you - as many of the products listed below work extremely well with related manufacturer coatings for use in offshore and industrial environments.
Rust-Oleum Heat Resistant Paint 750°C is for use on new, bright or shot-blasted steel or well pre-treated coated surfaces, intended to provide heat resistancce in touch-up and maintenance applications. For continuous temperatures up to 650°C and peak temperatures up to 750°C For bare metal or slightly rusted surfaces Also for well...
Rust-Oleum 4200 Heat Resistant Primer (orange in colour) provides heat resistance up to 425°C dry heat on metal substrates, including application on boiler fronts, incinerators, stacks, breechings, kilns and similar surfaces subject to high temperatures and rust producing conditions. Also known as 4268 Heat Resistant Primer. Withstands...
Rust-Oleum 4200 is a heat resistant aluminium finish topcoat providing heat resistance up to 425°C which should be applied over surfaces primed with Rust-Oleum 4200 Heat Resistant Primer. Withstands continuous exposure to temperatures of up to 425°C Long-term gloss retention Nice aluminum finish Single pack, easy to apply One coat is...
Teamac High Temperature Aluminium Paint. A high quality enamel for use at temperatures up to 450°C indirect heat. Advantages Ideal for use in areas prone to heat Can be used as a single coat for fire surrounds, radiators, hot pipes and more Click to jump down to Technical Data
Coo-Var Heat Resistant Black Enamel is a high quality enamel for use at temperatures up to 600 deg c indirect heat. May be used as a single coat for fire surrounds, radiators, hot pipes and more. Product Features Great heat resistance Apply direct Fast drying time Satin finish Great for domestic use Low sheen
Jotun Aluminium Paint H.R. is a one component styrene modified oxidatively drying alkyd coating that is heat resistant up to 250°C. It can be used as an exterior aluminium finish usually within an alkyd system. Can be used as primer, mid coat or finish coat in atmospheric environments. Suitable for properly prepared carbon steel and aluminium substrates.
International Intertherm 50 is a single component, high temperature coating, suitable for temperatures up to 540°C (1004°F) for the protection of steel from corrosion on areas including flare stacks, chimneys, exhausts, vents and pipework, etc.
International Intertherm 181 is a two component, high temperature resistant topcoat based on inorganic silicate technology. Specifically designed for application over inorganic zinc primers, which provides a single specification to be used for the protection of all pipework from corrosion at continuous operating temperatures up to 400°C (752°F).
International Intertherm 228HS is a highly crosslinked, two component, high build epoxy phenolic coating suitable for exposure in a wide range of highly corrosive environments, including insulated and uninsulated carbon and stainless steel for use on the exterior of pipework, process vessels etc., operating at temperatures up to 230°C (446°F).
International Intertherm 751 CSA is a high performance coating that is applied using standard application equipment and cures effectively at ambient temperatures. Capable of providing corrosion protection to steel in both atmospheric service and under thermal insulation operating in thermal cyclical conditions between -196°C (-321°F) and 400ºC...
International Intertherm 875 is a single component, intermediate temperature finish for use in a wide range of industrial environments as a heat resistant finish coat for application over properly primed steelwork in both new construction and as a maintenance coating at temperatures up to 260°C (500°F).
International Intertherm 891 is a one component, general purpose heat resistant paint for use as a heat resistant coating for general site use or as an industrial maintenance coating on both ambient and high temperature steelwork up to 315ºC (600ºF) where an economical aluminium finish is required.