Filter By

Hydron Nu-Flame Fire Upgrade System (For Timber)

The Nu-Flame Fire Upgrade paint system has been developed for the over-coating of multi layered paints for areas without the need to strip the current paint. This Timber pack is ideal for doors and skirting. All packs achieve BS Class 1/0 Surface Spread of Flame protection For interior use only Shipping Options (Select at...

Price £369.97 Regular price £411.08
In stock

Hydron Nu-Flame Fire Upgrade System (For Walls and Ceilings)

The Nu-Flame Fire Upgrade paint system has been developed for the over-coating of multi layered paints for areas such as stairwell, corridors and lift lobbies without the need to strip the current paint. Advantages All packs achieve BS Class 1/0 Surface Spread of Flame protection. For interior use only. Pack comes complete with the Heat...

Price £329.81 Regular price £366.45
In stock

Thermoguard Fire Varnish BS Class 1/0 & EN Class B System

Thermoguard Fire Varnish BS Class 1/0 & EN Class B s2 d0 System is a clear fire retardant varnish for interior and exterior timber surfaces. ADVANTAGES Clear or stained finish Tough/Durable finish UV and wear protection (Matt & Satin) Enhances natural beauty Shipping Options (Select at Checkout): Economy Shipping...

Price £141.30 Regular price £157.00
In stock

Thermoguard Thermocoat W

Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron:  Up to 90 minutes’ fire resistance Can be overcoated with compatible decorative topcoat Water-based Low odour Environmentally friendly Cost effective for large projects Certificate of supply available on request Can be applied by brush,...

Price £46.80 Regular price £52.00
In stock
All sale products

Need Help?

Plastisol Cladding Paint

Plastisol cladding is a protective and decorative outer cover for large commercial and industrial properties. These cladding panels require regular maintenance checks when in corrosive, UV exposed and harsh weather climates, but with the right primers and topcoats can be protected for up-to fifteen years. Cladding materials are usually metal – commonly aluminium or steel – with Plastisol cladding becoming more popular in recent years.

Occasionally (incorrectly at that) referred to as plastic cladding, Plastisol metal cladding consists of polyvinyl chloride particles in an emulsion, heated to form a solid and stable substrate. Visually striking in its freshly coated finish, if un-maintained, it can discolour, chalk and degrade through exposure over time.

There is 1 product.

Showing 1-1 of 1 item(s)

Active filters

  • Brand: Wethertex

Wethertex CP80 Clad-Seal Steel & Cladding Coating

This product is temporarily unavailable; in the meatime, we can recommend Rust-Oleum Mathys Metal Cladding Topcoat as a great alternative. Wethertex CP80 Clad-Seal Steel and Cladding Coating, a high performance, self priming, exterior quality satin paint for use on a variety of metal & plastic substrates. Developed using advanced Optilife silicone...

In stock

Damaged Plastisol Cladding

When damaged, the Plastisol coating can ‘come away’ or split from the underlying metal cladding. This can allow moisture and water particles to enter the newly exposed areas and cause rust. Damaged Plastisol cladding is not only an eyesore, but if left to degrade, it can be expensive to repair – whole panels may need replacing rather than simple maintenance repair work in the initial stages. To avoid any negative effects to the integrity of Plastisol cladding, a fantastic range of cladding paints are available here at Rawlins Paints.

Refurbishing aged, cracked and weathered Plastisol cladding couldn’t be easier in 2017, and with the right primer for particularly corroded areas, these panels can look like new again. This can be extremely important to large commercial buildings, offices and schools, where the visual décor and appearance may be used a lot in promotional materials and for online marketing.

To recoat and refinish Plastisol cladding is obviously cheaper and much more cost effective than replacing it – and if the correct surface preparation methods are used when treating damaged areas, any edges which have failed (and the top coating is breaking away from the metal cladding underneath) can be quickly restored.

Painting Plastisol Cladding

Many businesses and facilities can be kept open whilst the outer cladding is repaired or recoated by brush, roller or spray for larger surface areas. So, with our no-downtime Plastisol cladding paints and maintenance products, old water-damaged roof or side panel cladding can quickly be restored. The cladding paints available here also offer superb UV protection, protecting against any further colour fading from exposure to the sun.

Rapid dry and high performing one-coats are available, with full application methods and drying times covered in the accompanying data-sheets. For further technical and sales support when buying Plastisol cladding paints, please contact Rawlins Paints and we will be able to help recommend the best product dependant on your requirements. 

Guarantees, Warranties and Life Expectancies for Large Cladding Projects

Painting cladding is much more cost effective and less disruptive to the building than replacement. Using our products, it is possible for any competent person to protect and rejuvenate their weathered cladding, improving its life expectancy.

However, often larger cladding projects require some form of ‘guarantee’ for the client and/or building owner to provide peace of mind that the coating system applied to the cladding will last for an agreed period of time.

We offer systems that can be used year round to provide up to 20 years protection when applied by an approved contractor to Plastisol HP200, HPS200, PVF2, Powder Coating, Galvanised Steel and more. More than 15 million squares metres have been protected with our systems that are available in virtually any colour including metallic shades protecting against atmospheric, chemical and mechanical deterioration.

We will visit your site and carry out a full inspection, write a tailored specification to meet your requirements and offer an approved contractor for the application. We will never offer a contractor that we have not trained and approved, all our contractors have successfully completed specific product training on the systems they apply and are monitored regularly to ensure the highest standard of quality is achieved.

By using one of our nationwide approved contractors for our products you enable yourself to take advantage of our guarantees, life expectancies and warranties. This means if we say our system is going to last a certain amount of time, or perform in a certain way and it doesn’t, you’re covered.

If you’re a contractor and would like to become an approved installer of our systems please contact us on 0113 245 5450