The Nu-Flame Fire Upgrade paint system has been developed for the over-coating of multi layered paints for areas without the need to strip the current paint. This Timber pack is ideal for doors and skirting. All packs achieve BS Class 1/0 Surface Spread of Flame protection For interior use only
The Nu-Flame Fire Upgrade paint system has been developed for the over-coating of multi layered paints for areas such as stairwell, corridors and lift lobbies without the need to strip the current paint. Advantages All packs achieve BS Class 1/0 Surface Spread of Flame protection. For interior use only. Pack comes complete with the Heat...
Thermoguard Fire Varnish BS Class 1/0 & EN Class B s2 d0 System is a clear fire retardant varnish for interior and exterior timber surfaces. ADVANTAGES Clear or stained finish Tough/Durable finish UV and wear protection (Matt & Satin) Enhances natural beauty
Thermoguard Thermocoat W is a White Intumescent Paint for steel, structural steel and cast iron: Up to 90 minutes’ fire resistance Can be overcoated with compatible decorative topcoat Water-based Low odour Environmentally friendly Cost effective for large projects Certificate of supply available on request Can be applied by brush,...
Slurry has fast become the most popular technique for repairing and protecting paving both commercially and in specification projects. It is also very effective in larger domestic use. It does require a good deal of care in order to produce a well-polished, clean finish, but can be done expertly with our choice of products below. It is an improving mechanism, and our products do just that. It can improve workability, mechanical properties such as abrasion resistance, resistance to thawing, reduced shrinking or cracking and reduced permeability from water.
Some Recommended Uses:
- Bond Coat/Slurry
- A Pourable Micro Concrete
- Screeds with enhanced mechanical properties
- Basements, cellars and pits
- Foundations and sunken walls
- Concrete gutters
- Stone, brick, clay or concrete planters
Sika Damp-proofing Slurry is a 1-component damp proofing and waterproofing mortar for the damp-proofing of underground buildings or waterproof lining of water sources. Features and Benefits Easy to use and apply BBA approved Just add water Brush, trowel or spray applied Fast mixing Good adhesion Excellent workability Protects...
SikaTop Seal 107 is a two part polymer modified cementitious waterproof mortar slurry comprising of a liquid polymer and a cement based mix incorporating special admixtures. Features and Benefits Easy and fast mixing Very good adhesion Protects concrete against carbonation Protects against water penetration Non-corrosive to steel or...
SikaCem 810 is a modified SBR polymer admixture. It is a patented latex combination of SBR, silica fume and superplasticiser for bonding and improving mortars, renders and screeds. Features and benefits: Improved workability Improved mechanical properties, such as abrasion and impact Improved resistance to freeze/thaw cycles Reduced...
Sika MonoTop 109 WaterProofing Mortar is a one-component cement based premixed mortar with brushable consistency. Ready to use (just add water), high quality, thin waterproof slurry coating, based on special cements and admixtures to provide a water resistant and damp-proof finish. Suitable for preventing dampness and water penetration in...
Rust-Oleum Speed Patch Pourable Grade is a quick setting, pourable repair mortar that is ideal for patch repairs for heavily trafficked floors. Accepts heavy traffic 2 hours after application Easy to prepare: add water and mix Possible to apply on slightly wet concrete Sets at low temperatures (5°C) For deep or shallow repairs
A fibre modified concrete for backfilling around manhole frames and gullies and can also be used for surface repairs. HAPAS Approved since 2005 Shrinkage compensated Rapid set: 10-20 minutes 20N/mm² compressive Open to traffic: 90 minutes strength after 90 minutes Due to ongoing COVID 19, Instarmac products are temporarily only...
To open a Credit Agreement Trade Account at Rawlins Paints, simply click on the link below to download a Account Application Form. Once filled in, please return the Application Form to [email protected]
Alongside standard Technical and Sales Support Rawlins Paints offers to its customers, Credit Agreement Trade Account members will also benefit from:
- 30 Days Credit
- Preferential Pricing
- Access to Training
- Further Guarantees and Warranties
- And More
For further information, contact [email protected]
Download you Credit Agreement Trade Account Application Form here.