Sub-category links
Filter By
For Use By
For Use By
Product Range
Product Range
Product Type
Product Type
Fire Rating
Fire Rating
Suitable For Use On
Suitable For Use On
Colour Family
Colour Family
Single, Two or Three Pack
Single, Two or Three Pack
Base Type
Base Type
Finish
Finish
Application Method
Application Method
There are 109 products.
Active filters
SigmaCover 350 is a two-component, high-build polyamide cured anticorrosive epoxy primer/coating available in 2,600+ colours for wide use in Marine and Protective Coatings such as topsides, decks, superstructures and cargo holds.Available in 2,600+ colours, inc. RAL, BS, NCS & the new NCS 2050 colours Surface tolerant primer/coating...
PPG AquaCover 400 (also known as Sigma Aquacover 400) is a two-component, polyamine-cured, waterborne epoxy coating for steel structures in atmospheric exposure, touch dry in 90 minutes. Also suitable for concrete floors.Particularly suitable when solvents are not permitted because of health and safety reasons Free from lead- and...
This thinner has been developed by PPG Protective and Marine Coatings for use with selected paint products.More Information Delivery Info
PPG SigmaCover 456, a two-component, high-build, polyamide-cured recoatable epoxy coating available in 2,600+ colours, for steel and concrete structures exposed to atmospheric land or marine conditions, curing at temperatures down to -10°C (14°F). SigmaCover 456 can be recoated with various two-component and conventional coatings, even after...
This thinner has been developed by PPG Protective and Marine Coatings for use with selected paint products.More Information Delivery Info
PPG PhenGuard Subsea 780 (also known as Subsea 780 and Sigmaline 780) is a two-component, amine adduct-cured phenolic epoxy finish, used for the protection of subsea equipment.Qualified for NORSOK M501 Rev.6 System 7C up to 150°C (302°F) with 3 coating system (Phenguard 930 / 935 / Phenguard Subsea 780 system) Qualified for NORSOK M501...
PPG Sigmadur 550 H (formerly known as Sigmadur 568) is a two-component, high solids, high-build aliphatic acrylic polyurethane finish with excellent resistance to atmospheric exposure conditions with good colour and gloss retention, resisting splash of mineral and vegetable oils, paraffins, aliphatic petroleum products and mild chemicals....
PPG SigmaShield 880 (also known as Amerlock 880) is a two-component, high-build, polyamine adduct-cured epoxy coating primarily designed for use in offshore splash zone maintenance such as pipelines, jetties, piling, etc. with outstanding sea water resistance that requires just a single coat that continues to cure when immersed in water....
PPG PSX 700 is a two-component, engineered siloxane coating that can be applied directly over inorganic zinc. Offers good resistance to splash and spillage of chemicals.Available in 2,500+ colours, inc. RAL, BS, NCS & the new NCS 2050 colours Used on Adelaide Oval Cricket Ground in Adelaide, South Australia, Rio Tinto Dampier Salt...
SigmaFast 205 LT, a two-component, high-build, polyamide-cured zinc phosphate epoxy primer/coating for atmospheric conditions, drying and curing at low temperatures down to –5°C (23°F).Available in 2,300+ colours, inc. RAL, BS, NCS & the new NCS 2050 colours Easy application by airless spray Recoatable with most two-component epoxy...
PPG Dimetcote 9 (also known as Sigmazinc 9), is a two-component, moisture-curing zinc (ethyl) silicate coating for structural steel that can withstand substrate temperatures from –90°C (–130°F) up to 400°C (750°F), with good resistance to impact and abrasion.Anti-corrosive primer for structural steel. Specified for structural joints...
PPG SigmaCover 522 is a two-component, micaceous iron oxide-pigmented, polyamide-cured epoxy primer/sealer/coating. It has excellent adhesion to, and sealing of, weathered, cleaned, zinc-rich primers and metal-sprayed steel, with good adhesion to properly pre-treated galvanized steel.Can be used in systems for atmospheric or water-immersed...
Sub-category links
Filter By
For Use By
For Use By
Product Range
Product Range
Product Type
Product Type
Fire Rating
Fire Rating
Suitable For Use On
Suitable For Use On
Colour Family
Colour Family
Single, Two or Three Pack
Single, Two or Three Pack
Base Type
Base Type
Finish
Finish
Application Method
Application Method
PPG supply industries with protective paint coatings in a variety of market sectors throughout the world, spanning a diverse range of uses, including structural steel and chemical industries.
The market sectors that PPG cover include:
Infrastructure
Airports | Bridges | Recreational | Water/Wastewater facilities | Commercial buildings
Marine
New-build | Dry Dock | Inland Marine | Sea Stock | Offshore | Cargo Hold | Water Ballast Tank | Antifouling/Fouling Release
Mining
Transportation Equipment | Structural Steel | Under Insulation | Process Equipment | Pipes | Pipework | Floors and Walkways
Oil, Gas and Chemical
Structural Steel | Storage facilities | Process Equipment | Pipelines | Passive Fire Protection
Power
Power Generation | Fossil | Nuclear | Hydroelectric | Wind | Power Transmission and Distribution
Rail
Rail Cars | Rail Terminals and Support Infrastructure | Rail Tunnels | Tank Linings | Hopper Car Linings
