Sub-category links
PPG Protective and Marine Coatings offer a range of high quality coatings for many different environments. Not only does PPG create products that meet the relevant local and international standards, they prepare for the future by undertaking detailed research so they know the problems customers face; now and in the future.
There are 107 products.
SigmaCover 280, a universal epoxy anticorrosive primer suitable for ballast tanks, decks, topside, superstructure, hull and cargo oil tanks. SigmaCover 280 is used in protective coating systems for steel and non-ferrous metals, curing at temperatures down to 5°C (41°F), and can be overcoated with most alkyd, chlorinated rubber, vinyl, epoxy...
£43.49 (incl. VAT)
£36.24 (ex. VAT)
SigmaCover 350 is a two-component, high-build polyamide cured anticorrosive epoxy primer/coating available in 2,600+ colours for wide use in Marine and Protective Coatings such as topsides, decks, superstructures and cargo holds.Available in 2,600+ colours, inc. RAL, BS, NCS & the new NCS 2050 colours Surface tolerant primer/coating...
£64.51 (incl. VAT)
£53.76 (ex. VAT)
SigmaCover 350 LT is a two-component, high-build polyamide cured anticorrosive epoxy primer/coating that cures at temperatures down to -5°C (23°F), available in 2,600+ colours for wide use in Marine and Protective Coatings such as topsides, decks, superstructures and cargo holds.Available in 2,600+ colours, inc. RAL, BS, NCS & the new...
£268.18 (incl. VAT)
£223.48 (ex. VAT)
PPG SigmaCover 380 is a universal epoxy anticorrosive primer, based upon pure epoxy technology.Universal pure epoxy primer system suitable for ballast tanks, decks, topside, superstructures and hulls Good abrasion resistance for dedicated areas of application Suitable for immersion service (ballast tanks, outside shell) Good...
£62.33 (incl. VAT)
£51.94 (ex. VAT)
SigmaCover 400/Amerlock 400, a two-component, high solids, high performance self priming universal epoxy coating for steel and concrete, galvanising, stainless steel and non-ferrous metals, with low VOC. The coating has good adhesion on existing coats, compatible with prepared, damp surfaces, and has many qualifications including Nuclear...
£65.23 (incl. VAT)
£54.36 (ex. VAT)
PPG SigmaCover 410, formerley known as AmerCoat 410, a two-component general-purpose epoxy buildcoat in protective coating systems for steel and concrete structures exposed to atmospheric land or marine conditions. The coating has excellent durability and can be recoated with various two-component and conventional coatings, even after long...
£362.40 (incl. VAT)
£302.00 (ex. VAT)
PPG SigmaCover 435, two-component, high-build, micaceous iron oxide-pigmented, polyamide-cured recoatable epoxy coating. Used as a buildcoat or finish in protective coating systems, for steel and concrete structures exposed to atmospheric land or marine conditions, curing at temperatures down to -10°C (14°F).A high relative humidity...
£50.02 (incl. VAT)
£41.68 (ex. VAT)
PPG SigmaCover 456, a two-component, high-build, polyamide-cured recoatable epoxy coating available in 2,600+ colours, for steel and concrete structures exposed to atmospheric land or marine conditions, curing at temperatures down to -10°C (14°F). SigmaCover 456 can be recoated with various two-component and conventional coatings, even after...
£64.28 (incl. VAT)
£53.57 (ex. VAT)
PPG SigmaCover 456 HS is two component high solids polyamide cured recoatable zinc phosphate epoxy primer/coating. This general-purpose epoxy primer/coating is available in 2,600+ colours, inc. RAL, BS, NCS & the new NCS 2050 colours, for steel and concrete structures in atmospheric exposure that can be recoated with various two-component...
£112.34 (incl. VAT)
£93.62 (ex. VAT)
PPG SigmaCover 522 is a two-component, micaceous iron oxide-pigmented, polyamide-cured epoxy primer/sealer/coating. It has excellent adhesion to, and sealing of, weathered, cleaned, zinc-rich primers and metal-sprayed steel, with good adhesion to properly pre-treated galvanized steel.Can be used in systems for atmospheric or water-immersed...
£333.41 (incl. VAT)
£277.84 (ex. VAT)
PPG SigmaCover 555 is a two-component, polyamide-cured epoxy anticorrosive tiecoat, used as the final coat in epoxy underwater anticorrosive systems, with excellent adhesion for antifoulings.Excellent water resistance Good abrasion and impact resistance No induction time - 4 hours pot life 48 hours curing time before water immersion...
£246.43 (incl. VAT)
£205.36 (ex. VAT)
PPG SigmaCover 690 is a two-component high solids aluminium pigmented polyamine cured modified epoxy primer/coating designed for maintenance. SigmaCover 690 is a self-priming coating, tolerant to lower grades of steel preparation, and is compatible with most aged, good adhering coatings. It can be recoated with epoxy and polyurethane paints,...
£105.82 (incl. VAT)
£88.18 (ex. VAT)
PPG supply industries with protective paint coatings in a variety of market sectors throughout the world, spanning a diverse range of uses, including structural steel and chemical industries.
The market sectors that PPG cover include:
Infrastructure
Airports | Bridges | Recreational | Water/Wastewater facilities | Commercial buildings
Marine
New-build | Dry Dock | Inland Marine | Sea Stock | Offshore | Cargo Hold | Water Ballast Tank | Antifouling/Fouling Release
Mining
Transportation Equipment | Structural Steel | Under Insulation | Process Equipment | Pipes | Pipework | Floors and Walkways
Oil, Gas and Chemical
Structural Steel | Storage facilities | Process Equipment | Pipelines | Passive Fire Protection
Power
Power Generation | Fossil | Nuclear | Hydroelectric | Wind | Power Transmission and Distribution
Rail
Rail Cars | Rail Terminals and Support Infrastructure | Rail Tunnels | Tank Linings | Hopper Car Linings
