- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Need Help?
Pre-Paint Cleaners
It is vital to clean surfaces thoroughly before applying Interior Paint or exterior coatings, to prevent failure. Pre-paint cleaners remove grease, dirt, oils, and contaminants that stop coatings from bonding properly. Neglecting this step can result in flaking, peeling, or patchy finishes, especially on porous or previously painted surfaces. Whether preparing garden walls, factory floors, or kitchen ceilings, using the correct cleaner ensures that both interior and exterior paints perform as intended and look their best for longer.
Tikkurila Maalipesu Cleaning Agent
Alkaline cleaning and pre-treating detergent for interior and exterior surfaces prior to painting. Cleans unpainted surfaces by removing dirt, grease, oil, wax, etc. Also suitable for pre- treatment of hard and glossy paint surfaces prior to painting. Undiluted, it cleans the surface and generates a matt finish that improves adhesion of the...
Coo-Var Oil Remover
Aqueous cleaner designed for floors, walls, and other hard surfaces. Efficiently removes heavy oils, hydrocarbons, and ground-in dirt from concrete, brick, and breezeblock surfaces. Suitable for deep cleaning before applying coatings, seals, or other finishes. Removes slip hazards following leaks and spills.
Watco Concroff Oil & Grease Remover
Lift grease and oil from bare concrete with this powerful, water-based degreaser. For preparation of heavily contaminated greasy floors prior to painting, inside or outside. Low odour formula Ideal for preparation to painting Removes oil and grease Can be diluted and used as a general floor cleaner on bare concrete Safe for use on most...
Zinsser Mould Killer & Remover
Effective mould, fungus, and algae remover. Ideal for use on internal surfaces such as tiles, wood, plaster, and wallpaper. Perfect for bathrooms, kitchens, and high-humidity areas. Contains a powerful fungicide for a better and longer-lasting paint finish. Fast-acting formula that cleans and prepares surfaces for painting. Suitable for...
Flag Asipo Algicidal Treatment
A clear single pack water-borne algicidal wash/sterilising solution for use as an effective surface biocide. Protects against mould, lichens and algae. Simple to apply - 'Spray and Leave' on external surfaces - No scrubbing required For internal and external use - Long term protection against re-growth Ideal for removing green moss/algae...
Sika Hand Wipes
Sika Hand Wipes are specially designed to make the removal of uncured Sikaflex and SikaBond products from hands easy. They can also be used for removing uncured materials from tools and other surfaces, in this handy wipe form they allow for mess free cleaning and easy disposal. Each tub holds 100 wipes.
Zinsser DIF Concentrate Wallpaper Stripper
Clear, powerful formula that works in minutes. Effective on traditional paper, vinyl-coated, painted, and textured wallpapers. Unique liquid clings to vertical surfaces for easy application. Only one application needed to strip most wallpapers. Non-toxic, mildly scented, and safe to use. Easy to apply with a sprayer or roller.
Krud Kutter Original Cleaner/Degreaser
Krud Kutter Original Cleaner/Degreaser is a concentrated cleaner, degreaser and stain remover that quickly and easily removes tough stains from many different surfaces. Water-based, it contains no petroleum solvents, bleach or ammonia. It cleans what ordinary cleaners simply can`t and is particularly good as a tile and grout cleaner. More...
Krud Kutter Gloss-Off
Krud Kutter Gloss-Off is a no rinse formula that`s specially deisgned to prepare high gloss and other hard-to-stick-to surfaces for repainting or refinishing. Specially formulated to help new paint and varnish bond to old finishes, or as a wall preparation prior to wallpapering. Krud Kutter Gloss-Off cleans and deglosses without sanding...
Rust-Oleum Pre-Paint Cleaner
Concentrated pre-paint cleaner designed to clean and degrease surfaces prior to painting. For floors, walls, doors, window frames, metals, and more. Effortlessly removes organic and inorganic pollution. Biodegradable, non-foaming formula. Professional use only.
Fluxaf Power Clean
Fluxaf Power Clean is a powerful ready to use alkaline cleaner and degreaser. Based on a range of solvents and surfactants. It is designed to remove tough stains in seconds from practically all hard surfaces Biodegradable Suitable for removal of chewing gum, labels, tape residue, smoke damage, printers` ink, mildews stains, scuff marks,...
Owatrol Pura-Trol Concentrated Cleaner
Concentrated multi-purpose industrial-strength cleaner. For horizontal and vertical surfaces. Glassfibre, plastic, metal, concrete, brick. Walls, engines, cars, boats, facias, vinyl cladding, vehicles, masts, handrails and more.
Need Help?
Pre-Paint Cleaners for Surface Preparation
Paint and Surface Cleaners are essential for ensuring a sound base before priming or painting any surface. They eliminate grime, waxes, oils, and residues that can interfere with adhesion. Suitable for wood, concrete, masonry, and metal, these products are developed to remove stubborn deposits without damaging the substrate.
Whether dealing with new construction or refreshing old paintwork, selecting the right pre-paint cleaner is critical to a professional outcome. From solvent-based degreasers to water-based solutions for sensitive surfaces, the range includes products tailored to meet preparation standards in commercial, industrial, and domestic environments.
Pre-Paint Cleaners FAQs
Can pre-paint cleaners be used on painted surfaces?
Yes, but always check compatibility. Some cleaners are safe for painted surfaces, while others are aggressive and may strip or soften existing paint. Test a small area first.
Is rinsing required after using a pre-paint cleaner?
Some products are wipe-on, leave-on types, while others need rinsing. Always follow the instructions on the label to avoid residue that can affect paint adhesion.
Are these cleaners suitable for metal surfaces before priming?
Yes, many are designed to degrease and prepare bare or galvanised metal before applying primers or direct-to-metal coatings. Select a product with rust-inhibiting properties where needed.
Can I use sugar soap instead of a specialist cleaner?
Sugar soap can work on some interior jobs but often lacks the strength or precision of a professional-grade pre-paint cleaner, especially for exterior or industrial use.
Will pre-paint cleaners affect filler or caulk?
They can if not fully cured. Allow all fillers or caulks to dry as recommended before applying cleaners, and avoid harsh solvents that may soften or dissolve them.