Sub-category links
Filter By
Fastest Delivery
Fastest Delivery
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
There are 72 products.
Active filters
Carboline Carboguard E 19 Primer is a two-component epoxy polyamide primer containing zinc phosphate. A versatile epoxy primer with excellent resistance to salts, water and alkalies, with very good resistance to mild acids and solvents.Excellent corrosion resistance Cured film is tough and abrasion resistant Used 40% diluted as a...
Cromadex 750 Two Pack Epoxy Primer is a two pack epoxy primer for use over a wide range of substrates. It contains zinc phosphate giving added corrosion resistance for greater durability. The product can be air dried or stoved giving flexibility in production. It is available in white and grey as standard, it can also be tinted to ensure...
Cromadex 850 Two Pack Non-Isocyanate Acrylic Primer is a two pack non-isocyanate acrylic primer for use over a wide range of substrates. It contains zinc phosphate giving added corrosion resistance for greater durability. Formulated without isocyanate helping to reduce health and safety concerns. Cromadex 850 can be applied wet-on-wet giving...
Cromadex 903 Two Pack Chromate-Free Etch Primer is a two pack chromate-free etch primer designed for use over a wide range of substrates. It is formulated without the use of zinc tetroxy-chromate helping to reduce health and safety concerns. Cromadex 903 should be used to improve adhesion and corrosion resistance of all systems used over metal...
A fast drying reputation isn`t all International Intercure 200HS is renowned for. Complete with MIO, this fast cure anti-corrosive primer/intermediate with added barrier protection, can improve your productivity and lower your solvent emissions.Primer and intermediate in just one coat Rapid recoat times Low temperature cure, cures down...
International Intercure 324 is a two component, high solids, low VOC, epoxy zinc phosphate/micaceous iron oxide primer.Excellent barrier protection Low temperature cure and Rapid overcoating properties Pigmented with zinc phosphate anti-corrosive pigment to comply with the requirements of BS5493:1977Coverage Calculator More...
International Intergard 251 is a two component epoxy anti-corrosive primer pigmented with zinc phosphate for use on properly prepared surfaces in both new construction situations and as an industrial maintenance primer for a wide range of anti-corrosive coatings systems. Coverage Calculator More Information Delivery Info
International Intergard 2510 is a two component epoxy anti-corrosive primer pigmented with zinc phosphate, for use on properly prepared surfaces both in new construction and as an industrial maintenance primer for a wide range of anti-corrosive coatings systems. Coverage Calculator More Information Delivery Info
International Intergard 400 is a high build, two component epoxy, pigmented with lamellar micaceous iron oxide for enhanced corrosion resistance and improved overcoating properties after ageing. Coverage Calculator More Information Delivery Info
International Intergard 475HS is a low VOC, high solids, high build, two component epoxy coating. Available with conventional pigmentation, or alternatively can be pigmented with micaceous iron oxide to provide enhanced overcoating properties.High solids epoxy intermediate Micaceous Iron Oxide variant for additional barrier protection...
International Interplate 937 is a two pack, heat resistant zinc silicate shop (pre-construction) primer providing good corrosion protection (even after heating up to 800°C (1472°F), with minimum production of zinc salts. Suitable for high speed welding and cutting with excellent resistance to damage caused by welding, gas cutting and fairing....
With a proven 21 years` track record on over 8,700 projects, International Intershield 300 is the offshore industry benchmark in anti-corrosive performance. This unique abrasion resistant, pure epoxy coating, with an aluminium content >9%, offers long term asset protection to offshore structuresUnparalleled long term corrosion and...
Sub-category links
Filter By
Fastest Delivery
Fastest Delivery
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
