Filter By
Fastest Delivery
Fastest Delivery
Brand
Brand
There are 59 products.
Active filters
Desmothix is a polymeric thickener developed for use as a liquid additive for Desmopol Liquid Polyurethane Membrane, applying to verticle or sloped surfaces to prevent the fall of membranes due to longer drying times. More Information Delivery Info
Heskins Primer seals porous surfaces such as wood, concrete or stone prior to application of Heskins` anti-slip tapes, preventing moisture from degrading the adhesive. The surface primer also greatly helps to create an extra bond on other surfaces. Typical coverage - 5m² per litre. Available in water-based or solvent More Information...
Heskins Keying Agent increases the bonding strength of surfaces, ideal for the application of Heskins` anti-slip grip tapes such as Safety-Grip. More Information Delivery Info
Sikagard 230 MIC is a one part, ready-to-use, water based compound specially designed for the quick surface hardening of Sika MonoTop®-4400 MIC. Fast surface hardener. Specially designed for application after Sika MonoTop®-4400 MIC. Reduces the early drying of Sika MonoTop®-4400 MIC (immediate wet curing). Sewer back in service within...
Sikaflex-406 KC Booster is used with Sikaflex 406 KC to enable rapid and homogeneous curing throughout the entire sealant. Must be used with Sikaflex-406 KC Énables rapid release of areas to traffic, recessed and broadcast joints can be opened to traffic after only 3 hours (dependent on temperature) High joint movement capability of...
Tikkurila Akvi Primer is a universal primer for interior surfaces. All-round primer for furniture, doors, moulding and other wooden surfaces Outstanding sanding properties suitable for fast production lines Dries fast even at room temperature Can be overcoated either with water or solvent-based products Particularly well suited to...
SikaCeram-62 FlowFix Bonding Primer is a ready to use (just add water) flexible, polymer modified, cementitious bonding primer. Designed to deliver exceptional bonding of porcelain paving onto wet bedding mortar. Easy and fast to mix High strength Fast curing For exterior use only Applied by brush or roller More Information...
Tremco CS100 Epoxy Primer is a two part water based epoxy primer and bonding agent. CS100 Epoxy Primer is designed to prime Tremco surface damp proof membranes and other non-porous surfaces before the application of Tremco smoothing compounds. Specifically formulated for interior use on particularly smooth or dense surfaces such as:...
Tremco CS150 Acrylic Primer is a universal primer for porous substrates. Specifically designed for use as a primer for polymer screed applications or beneath smoothing compounds on porous substrates. Easy to apply Helps to prevent pin-holing Helps maintain the flow characteristics of the screed Coverage of approximately 8m² per litre...
Tremco CS175 Epoxy Primer for Porous Substrates is a two part water based epoxy primer. CS175 provides a breathable sealer for calcium sulphate screeds. Additionally, it is suitable for priming new and existing cementitious screeds, concrete, brick and blockwork. May be used as a low viscosity primer for epoxy paint coatings on prepared...
Tremco CS190 Gritty Primer is a ready mixed, ready to use rapid drying primer that can be used on both absorbent and non-absorbent substrates. CS190 provides a textured surface which gives an excellent bonding surface for self-levelling/smoothing compounds and screeds. Suitable for use on a wide range of substrates including existing...
Cromar AlphaChem Integral Waterproofer is a liquid additive specifically designed to improve water resistance in concrete and mortar for use in applications where this is a necessity. Enhances water resistance in concrete and mortar Improves plasticity and workability of mortar mixes Do not pre mix with other admixtures Do not use in...
Filter By
Fastest Delivery
Fastest Delivery
Brand
Brand
