Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
Our repairing primers and additives come courtesy of Remmers and Sika. There are bond promoters, rust inhibitors, binders, corrosion protection, salt inhibitors, strengtheners, modifiers, special fillers and quartz! All intended to strengthen and reinforce the attributes of your systems. If you have a project that needs a specific requirement in abundance, then an additive can assure you that.
When choosing a primer, be sure to check the Product Data Sheet of both the primer and the system you plan to use after. Most products are very specific about which primer should be used in conjunction and the wrong choice of primer can result in chemicals being mixed that are not best suited. Usually a manufacturer will suggest their own primer, but this is with good reason as the two will have been designed with each other in mind.
If you are unsure at all which product would suit your needs best, please give our Technical Support Team a call on 0113 245 5450, email us on [email protected] or get in touch on one of our social media outlets where our web team will help as best as they can.
There are 12 products.
Active filters
A solvent-based penetrative primer for use before painting with Elastocolor Paint. Has high penetration properties for porous substrates. Applications include:Fixing treatment for chalking and dusty substrates such as cementitious renders and concrete surfaces before painting with Elastocolor Paint Anti-evaporation protection of fresh...
£299.20 (incl. VAT)
£249.33 (ex. VAT)
Curing admixture with the ability to reduce hydraulic shrinkage and the formation of micro-cracks. Typical application in Construction and repair of:Floor joists and motorway viaduct piers Industrial floors Multi-storey car parks Hydraulic works, such as canals, overflow channels, tanks, etc Prefabricated concrete elements such as...
£16.62 (incl. VAT)
£13.85 (ex. VAT)
Mapethene Primer is used as a primer for self-adhesive bitumen membranes from the Mapethene line.Ready to use Applied by brush, roller or spray Quick drying Solvent-free Please note this product is subject to a minimum order quantityFor professional use only.More Information Delivery Info
£30.53 (incl. VAT)
£25.44 (ex. VAT)
Epoxy primer specific for the MapeWrap system, preparing concrete, reinforced concrete or masonry surfaces, a necessary procedure for bonding MapeWrap fabrics.For professional use onlyMore Information Delivery Info
£66.30 (incl. VAT)
£55.25 (ex. VAT)
Primer 3296 is for consolidating and improving the characteristics of weak, crumbly or powdery surfaces. It is also suitable for outdoor use for consolidating the surface of concrete slabs, screeds, renders, bricks, sandstone, tuff, cement and lime-based decorative mortar.Acrylic primer in water dispersion for consolidating porous surfaces...
£48.20 (incl. VAT)
£40.17 (ex. VAT)
Mapei Plastimul Primer is a one-component, solvent-free, bitumen emulsion primer for treating substrates before applying a waterproofing product from the Plastimul range.Even out and improve bonding to the substrate before applying waterproofing products Good workability properties, produced according to a formula developed in MAPEI’s own...
£174.26 (incl. VAT)
£145.22 (ex. VAT)
Mapei Plastimul C is a solvent-free concentrated bitumen emulsion for treating substrates before applying waterproofing products from the Plastimul line.Used to even out and improve their adhesion to the bonding surface on concrete or brickwork substrates (vibro-compressed concrete blocks, solid bricks, airbricks, cellular concrete blocks,...
£25.38 (incl. VAT)
£21.15 (ex. VAT)
Mapei Eco Prim PU 1K Turbo is a one-component, quick drying, solvent-free, moisture curing polyurethane primer with very low emission of volatile organic compounds (VOC) for consolidating and waterproofing cementitious screeds.For professional use Consolidator for weak cementitious screeds Surface consolidation and dust-repelling...
£339.84 (incl. VAT)
£283.20 (ex. VAT)
Mapei Mapeproof Primer is a one-component, rapid drying PVDC based dispersion primer for suppressing residual moisture up to 4.5 CM-% (95% R.H.). Ready to use system which provides a waterproof surface membrane.For professional use Impedes the passage of residual construction moisture from affecting subsequent floor covering...
£177.98 (incl. VAT)
£148.32 (ex. VAT)
Mapei Primer M is a one-component, solvent-free primer for polyurethane sealants, for use on absorbent and non-absorbent surfaces.For professional use Used to improve the bonding of polyurethane sealants on non-absorbent surfaces, such as metals (iron, steel, aluminium, copper, zinc-plated sheets), ceramic, glass and painted sheets or...
£44.14 (incl. VAT)
£36.78 (ex. VAT)
Quarzolite Base Coat is a coloured acrylic undercoat in water dispersion, with micro-granular quartz and selected charges. It is used to even out the absorption of the substrate and promote bonding of successive coats of paint and layered finishing materials from the Quarzolite range.For professional use only Used to prepare the base...
£143.28 (incl. VAT)
£119.40 (ex. VAT)
Mapei Eco Prim Marine is a solvent-free, acrylic resin-based primer in water dispersion applied on surfaces using conventional tools. Resistant to water and ageing.For professional use Adhesion promoter for cementitious mortar applied on metal or cementitious surfaces Eco Prim Marine must only be used on internal decks and dry surfaces...
£75.82 (incl. VAT)
£63.18 (ex. VAT)
Sub-category links
Filter By
For Use By
For Use By
Brand
Brand
Product Range
Product Range
Colour Family
Colour Family
Suitable For Use On
Suitable For Use On
Base Type
Base Type
Finish
Finish
Application Method
Application Method
Interior / Exterior Use
Interior / Exterior Use
