Stimsonite 980 Road Studs are surface mounted road studs that are injection moulded from durable polymers to endure high traffic volumes. The patented sure grip base provides excellent adhesion to the road surface and the patented prismatic glass lens provides high, long-term levels of enhanced reflectivity.
Floor Primers & Sealers
Prepare, strengthen and dustproof concrete floor surfaces with single pack or two component products from our wide range of floor primers and sealers for interior and exterior projects. Ensure maximum adhesion and optimum coverage with our professional grade concrete floor primers or keep the look of your floor with our clear concrete sealers.
For saving time and costs in stabilising, binding and sealing porous floor substrates, Rawlins Paints have compiled professional-grade floor primers and sealers that are compatible and suitable for commercial and industrial purposes. These include heavy-use concrete floor sealers for factory and warehouse locations, where durability for extended periods of time is essential. In waterproofing, binding and sealing freshly laid, renovated, or repaired concrete flooring, the problems associated with concrete dust are immediately removed, and any potential staining or discolouration from oils, fatty substances, grease, cleaning chemicals or UV exposure can be protected against.
- Brand: Remmers
Remmers Concrete and Screed Strengthener is a chemical consolidation agent for the protection for fresh concrete, strengthening and repairs, surface protection and adhesive primer.
Remmers Epoxy BS 2000 New is a pigmented, water emulsifiable epoxy resin for versatile use, used as a primer or adhesion promoter in the Remmers Water Vapour Diffusion-Open System. Silk matt, low odour, resistant to alternating frost/thaw cycles. Ideal for warehouses, garages and car parks.
Remmers Epoxy BS 2000 Transparent is a water emulsifiable, epoxy resin for versatile use, used as an impregnation agent or adhesion promoter in surface protection systems. It can also used as a bonding layer worked wet-on-wet in combination with levelling compounds or epoxy resin systems. Ideal for warehouses, garages, parking garages, balconies.
Remmers Epoxy FAS 100 is a substrate tolerant, unpigmented epoxy resin binder that is used as an impregnation agent, primer, levelling layer and for the production of compression resistant mortars, flow mortars, blinding layers for blinded covers.
Remmers Epoxy MT 100 is a special primer for matt damp substrates based on a transparent epoxy resin. Remmers Epoxy MT 100 is an un-pigmented epoxy resin binder that is used as an impregnation agent, primer, bonding layer, levelling layer and for the production of compres-sion resistant mortars, flow mortars as well as a blinded layer for blinded covers.
Remmers Epoxy Quick 100 is a very fast reacting, transparent epoxy resin that is used as a primer, for levelling layers and for the production of compression resistant mortars beneath coatings. Can be subjected to heavy mechanical and chemical loads. Ideal for consumer markets, workshops, fabrications halls, assembly areas, food industry,...
Remmers Epoxy ST 100 LV is an unpigmented epoxy resin binder that is used as an impregnation agent, primer, bonding layer, levelling layer and for the production of compression resistant mortars, flow covers and as a blinding layer for blinded covers. Ideal for use in workshops, parking garages, production halls, assembly areas and warehouses...
Remmers Epoxy ST 100 TX is an un-pigmented thixotropic epoxy resin binder that is used as primer or as a pore filler on epoxy screeds. Thixotropic, plasticizer-free, withstands mechanical and chemical loads.
Remmers Epoxy ST 100 is an unpigmented epoxy resin binder that is used as an impregnation agent, primer, bonding layer, levelling layer and for the production of compression resistant mortars, flow covers and as a blinding layer for blinded covers. Image already added
Remmers Epoxy UV 100 is a UV-protected, transparent, epoxy resin with a wide application spectrum. It is used for decorative pebble or Color Quartz covers, for fixating flake coatings and as a glossy, thick layer sealant on decorative substrates. Ideal for workshops, fabrication halls, exhibition or assembly rooms, retail and wholesale areas...
Remmers Epoxy UV 100 TX (formerly Acolan Sediment Resin) is a thixotropic, transparent epoxy resin with little tendency to yellow used as a binder for flake and blinded coatings or as a pore filler on open-pored, epoxy resin screeds. Can be subjected to mechanical and chemical loads. Image already added
Concrete Floor Sealers
Concrete floors which require high-performance primers to harden and seal the surface and further improve its adhesion, will lengthen the lifespan of topcoat systems – allowing for high-performance protection for longer periods of time in areas where manufacturing plant equipment needs to be installed and maintenance work kept to a minimum with the use of high-end products in the surface preparation and finishing stages.
The products listed in this category will protect untreated masonry and concrete floors in warehouses and more, against:
- Chemical resistance
- Oil spills and fuel leaks
- Abrasive cleaning chemicals
- Light to medium vehicular use
- Pedestrian and footfall traffic
- Concrete dust
- Surface and trapped substrate damp and moisture build-up
- Weather and environmental exposure
- UV discolouration
- See product datasheets for further specifications and related product compatibility for the ultimate concrete floor protection
Please refer to product datasheets for product compatibility with treating cement screeds, brickwork, blockwork, plaster and porous tiles.
Dependant on requirements, water-based and solvent-based floor primers and sealers are available. These differ in VOCs, drying time, recoatable times and approximate coverage rates. Each product varies in graded performance for; new-build projects which require a sealer to reduce the porosity of and work deep beneath new concrete surfaces, dustproofing it in a single clear coating - against older concrete flooring that has recently been repaired and may need a hardened sealer to further reinforce it.
Industrial Concrete Floor Primers
Concrete floors in more aggressive environments, such as factories and warehouses, along with commercial garages and vehicle manufacture plants will require heavy-duty floor primers that can be overcoated with concrete or epoxy floor paints. These will help deliver high-performing protection against impact damage and light, medium and heavy vehicular use. If you prefer to use concrete floor primers and finishing paints by the same manufacturer, but are after a unique or specifically coloured topcoat, or are wanting further information about the compatibility of products by different manufacturers, please contact our technical support team. They can recommend suitable products, and offer application and storage advice on any purchases made.
The specialist team at Rawlins Paints can provide full technical support across all Blackfriar Professional, Coo-Var, Ennis-Flint, Jotun, Rust-Oleum, Sherwin-Williams and Sika floor sealers and primers.
Rawlins Paints’ Floor Sealers and Primers
Rawlins Paints also offer its own range of high-performance epoxy and clear floor sealers and primers for damp-proofing problematic and porous floor substrates, providing improved adhesion to areas requiring a full floor paint system installation, and priming sheet metal flooring.
Our tack-free floor primers and sealers are designed for commercial and industrial projects and builds. Contact us if you'd like more assistance and technical support with our range of concrete floor sealers and primers.
Painting floors with high-quality commercial or industrial coatings is much more cost effective and less disruptive to a project than using cheaper substitutes. Larger projects require some form of ‘guarantee’ for the client and/or building owner to provide peace of mind that the coating system applied to internal or external flooring will last for an agreed period of time - if correctly maintained.
Using our products, it is possible to decorate and protect concrete, tarmac, asphalt, wood or metal floors, both improving its life expectancy for greater periods of times, and delivering waterproofing and protective properties that can lower the risk of major repair and costly maintenance work. Achieve long-lasting results, with the wide range of floor paints and coatings available at Rawlins Paints today.
We offer systems that are available in virtually any colour and finish - including colour matching existing decorative or company colour schemes - in our light to medium (pedestrianised) right up to heavy use (light to medium vehicular activity) coatings for a wide range of interior or exterior substrates and surface materials.
A trained member of our Technical Support Team will visit your site and carry out a full inspection, write a tailored specification to meet your requirements and offer an approved contractor for the application. We will never offer a contractor that we have not trained and approved, all our contractors have successfully completed specific product training on the systems they apply and are monitored regularly to ensure the highest standard of quality is achieved.
By using one of our nationwide approved contractors for our products you enable yourself to take advantage of our guarantees, life expectancies and warranties. This means if we say our system is going to last a certain amount of time, or perform in a certain way and it doesn’t, you’re covered.
If you’re a contractor and would like to become an approved installer of our systems please contact us on 0113 245 5450