- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Jotun Tankguard 412 is a two component solvent free polyamine cured epoxy coating that is a general purpose tank lining.
- Good chemical resistance.
- Can be used as a primer, mid coat or finish coat in atmospheric and immersed environments
- Suitable for properly prepared carbon steel, galvanised steel, stainless steel and concrete substrates
Jotun Tankguard 412 is a two component solvent free polyamine cured epoxy coating that is a general purpose tank lining with good chemical resistance. It can be used as a primer, mid coat or finish coat in atmospheric and immersed environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel and concrete substrates.
Areas of Use
Marine: Jotun Tankguard 412 can be used as a coating for potable water, grey water and crude oil tanks.
Protective: Jotun Tankguard 412 is recommended as an internal lining for offshore, onshore and buried tanks and pipes. Refer to Protective Product Resistance List. Recommended for offshore environments, including splash zones, refineries, power plants, bridges, buildings, mining equipment and general structural steel.
Approvals and certificates
- Tested in acordance to AS/NZS 4020:2005, testing of products for use in contact with drinking water.
- Approved by the Norwegian Institute of Public Health for use in contact with potable water.
- Compliant for large tanks with ANSI/NSF standard 61 - 2007a, drinking water systems components.
Additional certificates and approvals may be available on request.
BUYER NOTICE: Due to the complexities and risks within tank coatings, Jotun do not support the purchase of their Tankguard range through dealer/distributor channels. Jotun are happy to support with advice and documentation required for these types of coating projects but as they are removed from the end user the ability to control all risks involved with a coating project for a tank is limited. For these reasons, Jotun will only ensure the product quality within the can when Tankguard products are purchased via a distributor such as ourselves.
Data sheet
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior Use
- For Use On
- Carbon Steel, Galvanized Steel, Stainless Steel, Concrete
- Application Method
- Brush, Spray
- Sheen
- Gloss
- Colour
- Standard / Ready Mixed
- VOC Levels
- Low (50-149 g/l)
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 15L
- Application
- Brush, Spray
- Coverage
- 2 to 6.5m² per litre
- Density
- 1.5 kg/l
- Solids by Volume
- 98 ± 2 %
- VOC
- 140 g/l
- Touch Dry
- 6 hours
- Recommended Dry Film Thickness
- 150 - 500 μm
- Recommended Wet Film Thickness
- 150 - 500 μm
- UN Number (Activator)
- UN2735
- UN Number (Base)
- UN3082
- Pot Life
- 1 hour at 23°C
- Base Type
- Solvent-Free
- Suitable For Use On
- Immersion
- Suitable For Use On
- Concrete
- Suitable For Use On
- Carbon Steel
- Finish
- Gloss
- Application Method
- Brush
- Application Method
- Spray
- Product Usage Type
- Tank Lining
- Product Range
- Tankguard
- Colour Family
- Red
- Colour Family
- White
- For Tanks or Pipes
- Tank
Questions
Question about the product
Po Kwong on 2021-08-02 09:16:54 | Question:
May I know if this coating have any certificate for drinking water? Can you send me the certificate for my consideration if yes. |
Answer from Rawlins’ Technical Team:
We would recommend Jotun Tankguard DW for application to tanks containing drinking water. | |
CLIVE on 2020-03-10 09:01:04 | Question:
Would this be the best coating for polyester fresh water tanks? Thanks |
Answer from Rawlins’ Technical Team:
We would instead suggest Jotun Tankguard DW for polyester tanks. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Jotun Tankguard 412 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT