Follow us on:

Nullifire TS815 Solvent-Based Acrylic Top Seal

Nullifire TS815 Solvent-Based Acrylic Top Seal

TS815
NUL2229

Nullifire TS815 Solvent-Based Acrylic Top Seal is a single pack, high build modified acrylic topseal conforming to 2010 VOC limits. This product is designed for use with the Nullifire System S range of intumescent basecoats. 

  • Available in 4,300+ colours, inc. RAL, RAL Design, BS, NCS & the new NCS 2050 colours

Product customisation

Don't forget to save your customization to be able to add to cart
  • 250 char. max
Colour Group
Size
Finish
£113.30(incl. VAT)
£94.42(ex. VAT)
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

No queries yet, leave the first!
Description

Nullifire TS815 Solvent-Based Acrylic Top Seal can be used either internally, within a building by the application of a single coat, or externally using two coats with the appropriate intumescent basecoat.

Available in 4200+ colours from RAL, NCS and British Standard.

Application Checks

Before applying Nullifire TS815 Solvent-Based Acrylic Top Seal, ensure that:

  • The product specification is appropriate for your intended requirements.
  • The basecoat is fully dried.
  • The surface finish of the basecoat is suitable for overcoating.
  • The correct dry film thickness (DFT) of basecoat has been applied before topsealing.
  • The number of coats of topseal required in accordance with the specification (one or two coats). The topseal is fully mixed prior to its application.
  • The number of coats has been determined to suit the specified colour.
  • The spray equipment is suitable for the correct application of the topseal.
  • The site conditions are within the specified limits for application of the topseal.
  • The topseal is stored within the specified conditions.
  • You are fully conversant with the application instructions prior to applying the topseal. 

Surface Preparation

Only apply TS815 Topseal onto a fully dried System S Basecoat; normally this will be 3-5 days after basecoat application. Dependant upon site conditions, heavy basecoat loadings may require longer drying periods prior to the application of TS615 Topseal. The surface of the dried basecoat must be clean, free from condensation, grease or other contamination. 

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.

Product Details
2229-983343

Data sheet

Interior / Exterior Use
Interior & Exterior
Single, Two or Three Pack
Single
Application
Brush, Roller, Spray
Coverage
10m² per litre
Touch Dry
8 Hours
Base Type
Solvent-Based Acrylic
Finish
Eggshell
Application Method
Brush
Application Method
Roller
Application Method
Spray
Product Usage Type
Topcoat
Colour Family
Grey
Colour Family
Green
Colour Family
Blue
Colour Family
Red
Colour Family
Brown
Colour Family
Pink
Colour Family
Orange
Colour Family
Purple