Please note should you be unsure whether this product/system is suitable for your requirements please download and complete the 'Thermoguard Wall/Ceiling Enquiry Form' and return by email to [email protected]

Upon receipt our team will respond within 24-48 hours with specification/advice on our best suggestion for your project. If you have any questions regarding this process consult our technical department on 0113 2455450 (option 2).

Thermoguard Wallcoat BS Class 1/0 & EN Class B System

Thermoguard Wallcoat BS Class 1/0 & EN Class B System is a coloured fire retardant paint system for interior plasterboard ceiling and wall surfaces. These packs have been created to help users ensure they are purchasing sufficient product for their project. Each pack contains the correct amount of basecoat (Wallcoat) and topcoat (Wallcoat Smoke & Flame Retardant Topcoat) to ensure protection is achieved inline with the manufacturers recommendations to the respective area in question.

4000+ colours available from RAL, BS & NCS

Each component of the packs can still be purchased individually if required here: Wallcoat Insulating Basecoat and here: Thermoguard Wallcoat Smoke & Flame Retardant Topcoat

Pack Contents

• 25m² Pack = 1 x 25m² Wallcoat Insulating Basecoat + 1 x 25m² Wallcoat Smoke & Flame Retardant Topcoat
• 50m² Pack = 1 x 50m² Wallcoat Insulating Basecoat + 1 x 50m² Wallcoat Smoke & Flame Retardant Topcoat
• 100m² Pack = 1 x 100m² Wallcoat Insulating Basecoat + 1 x 100m² Wallcoat Smoke & Flame Retardant Topcoat

Specification (Interior Use Only)

Inspect and prepare in accordance with manufacturer’s instructions and apply -

• 1 coat of Thermoguard Wallcoat Insulating Basecoat
• 1 coat of Thermoguard Wallcoat Smoke & Flame Retardant Topcoat

2 coats of Thermoguard Wallcoat Smoke & Flame Retardant Topcoat may be required for strong/dark colours - Thermoguard Wallcoat will be provided in a suitable undercoat shade to aid topcoat opacity unless instructed otherwise.

For 30 & 60 minute protection please see Thermoguard Wallcoat 30 & 60 Minute Protection System Packs

Fire Testing & Certification

Tested at UKAS Fire Test Laboratory -

• Achieved BS EN Class B s1 d0

Thermoguard issue a Fire Certificate upon request for each correctly specified project for Insurance, Fire and Building Authority and Client Records against proof of purchase. Certified Fire protection is guaranteed if all instructions are followed on suitable surfaces.

Preparation

Surfaces should be sound and firmly adhering, clean, dry and free of surface contamination. Remove loose, flaking or suspect paint films and adequately abrade existing smooth or hard coatings – abrasion not needed on Vinyl Matt.

Application & Conditions

Apply by brush or roller, thinning to a maximum 5% with water, provided specified spread rate is achieved. Maintain wet edge during application.

During application and drying, ensure a minimum temperature of 5°C, maximum relative humidity 75% and surface temperature at least 3°C above dew point. Avoid condensation.

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.