- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- 1,600+ Colours
- High quality matt primer finish.
- For wood, plaster, masonry and more.
- For interior prime/finish and exterior priming.
- High opacity, excellent adhesion.
Product customisation
Don't forget to save your customization to be able to add to cartZanders PF59 Stain Blocking Primer Finish is a high quality primer finish in a durable matt finish for all interior and exterior wood, plaster and masonry. Based on advanced acrylic technology Zanders PF59 Stain Blocking Primer Finish also inhibits stains bleeding through the substrate.
Zanders PF59 Stain Blocking Primer Finish is also suitable for multiple substrates including difficult to apply surfaces such as galvanized steel, fibre cement boards, ceramic and glazed tiles, doors, trim and windows.
Available in 1,600+ colours, inc. RAL, RAL Design, BS, NCS & the new NCS 2050 colours.
Please Note: Suitable for use as a Primer and Finish for interior use but as a Primer only for exterior use.
Quick Links - Click To Jump To Section:
Features & Benefits
- High quality primer finish
- Durable matt finish
- For all interior and exterior wood, plaster and masonry
- Based on advanced acrylic technology
- Inhibits stains bleeding through the substrate
- Excellent opacity
- Low odour
- Excellent adhesion
- Interior and exterior use
- Also suitable for multiple substrates including difficult to apply surfaces such as galvanized steel, fibre cement boards, ceramic and glazed tiles, doors, trim and windows
- Available in 1,600+ colours, inc. RAL, RAL Design, BS, NCS & the new NCS 2050 colours
- Please Note: Suitable for use as a Primer and Finish for interior use but as a Primer only for exterior use
Preparation
- Ensure all surfaces to be painted are clean, dry and free from grease and loose or flaking material, or any other contaminants that may impair adhesion
- Any faults in the substrate, particularly those that can lead to moisture penetration must be rectified or can affect the finish quality
- Any existing crazed or flaking paint, dirt, grease or other surface contaminants should be removed
- If your substrate has been previously painted, rub down with a fine waterproof abrasive paper and then rinse thoroughly
- Bare substrates should also be abraded in a similar manner to allow improved adhesion
- To improve inter-coat adhesion, repeat between all additional coats
- Please avoid inhaling any sanding dust and always wear a face mask if fine sanding
- Special precautions should be taken during preparation of pre-1960's paint surfaces over wood and metal as they may contain harmful lead
- Hard wall plasters should be scored with a coarse glass-paper
- External Masonry Surfaces only: Loose or friable substrates can be treated with Wethertex ST1 Quick Dry Stabilising Primer prior to application
- Exterior surfaces only: Surfaces affected by bacterial, algal and fungal growth should be treated with Wethertex C10 Multi-Surface Fungicidal Wash prior to use
Application
- Stir the product thoroughly to ensure it is fully homogenous, do not contaminate
- Application tool type and quality may influence the finished appearance
- For the best results apply by brush, roller or spray
- Apply liberally and avoid overspreading
- Not to be applied below 8°C
- Under normal conditions will be dry after 1 hour and can add additional coats after 3-4 hours
- Ensure good ventilation during drying and application
- Porous surfaces should be sealed with a first coat of Zanders PF59 Stain Blocking Primer Finish thinned with up to 20% clean water
- Allow fresh plaster to dry thoroughly before application
- It is recommended that the application of 2 coats is generally sufficient, though more may be required dependent on the nature and porosity of the substrate
Storage
- Stored unopened in a dry place at temperatures above 5ºC, shelf life is 12 months from the date of manufacture
- Once you have completed painting ensure you remove as much product as possible from your application tool
- Protect from frost
- If you have any left over product, ensure that you close the tin by replacing the lid firmly and securely and store in a safe place
- To avoid the risk of spillage, always store and transport in a secure upright position
Tool Cleaning
- All equipment must be washed with clean, warm soapy water after use
- Waste material should not be emptied in the drainage system
- Some local authorities have special facilities for the disposal of leftover paint
- Please do not add any product into drains or watercourses
Data sheet
- Manufacturer
- Wethertex
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Plaster, Masonry, Wood
- Application Method
- Brush, Roller, Spray
- Sheen
- Matt
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Single
- Pack Size
- 10L
- Application
- Brush, Roller, Spray
- Touch Dry (at 20°C)
- 1 Hour
- Dry to Recoat (at 20°C)
- 2-4 Hours
- Fully Cured (at 20°C)
- 7-10 Days
- Coverage
- 9m² per litre
- Suitable For Use On
- Wood
- Suitable For Use On
- Wooden Walls
- Suitable For Use On
- Plaster
- Suitable For Use On
- Wood Windows
- Suitable For Use On
- Galvanised Steel
- Suitable For Use On
- Wooden Windows
- Suitable For Use On
- Fibre Cement Board
- Suitable For Use On
- Metal Windows
- Suitable For Use On
- Doors
- Suitable For Use On
- Trim Skirting
- Suitable For Use On
- Windows
- Suitable For Use On
- Glazed Tiles
- Suitable For Use On
- Wooden Doors
- Suitable For Use On
- Metal Doors
- Suitable For Use On
- Metal Walls
- Suitable For Use On
- Masonry Walls
- Suitable For Use On
- Plaster Walls
- Suitable For Use On
- Wood Walls
- Suitable For Use On
- Masonry
- Suitable For Use On
- Ceramic Tiles
- Suitable For Use On
- Tiles
- Suitable For Use On
- Wood Doors
- Product Usage Type
- Stain Blocker
- Fastest Delivery
- Next Working Day
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Stone
- Colour Family
- Lilac
- Colour Family
- Salmon
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Product Focus
- Stain Blocking Paints
Questions
Question about the product
Ian Ballard on 2021-07-14 10:04:15 | Question:
Hello I want to paint over some internal pine tongue and groove walls but do not want any of the knots in the wood to show through Is this paint cover the knots even if i have to do more than th e rcommended coats? Thank you |
Answer from Rawlins’ Technical Team:
We would recommend using a shellac based product on the knots prior to application of the primer, such as Coo-Var Patent Knotting or Zinsser B-I-N. We would recommend testing for compatibility and adhesion when priming over these areas. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Zanders PF59 Stain Blocking Primer Finish is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
General Painting Application Kit
Provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects, including uPVC surfaces, walls, ceilings, and more. Click to jump down to...
Wethertex C10 Multi-Surface Fungicidal Wash
Colourless water based masonry wash. Ideal for use on masonry and wood surfaces. Effectively removes bacterial, algal, and fungal growth. Fast-acting bioactive technology for efficient cleaning. Ready-to-use water-based solution. Provides long-term protection and low maintenance.
Wethertex ST1 Quick Dry Stabilising Primer
High-performance quick dry stabilising primer. Ideal for use on masonry and previously painted surfaces. Penetrates deeply into substrates for ultra-high adhesion. Enhances the application of Wethertex masonry paints with minimal delay. Contains biocides for protection against microbial growth. High vapour permeability for breathable...
Wethertex Textured Rollers
Wethertex S.A. Quicklock Textured Roller sleeves and frames for applying products such as Wethertex HBS Flex-Coat Hi-Build Coating. Choose from individual 7" and 10" roller sleeves and frames, or sets from the menu below.