- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
High performance mineral paint system in 250 colours for extreme climatic conditions. Offers water repellence, vapour permeability and forms a chemical crystalline bond with the substrate.
- Easy to clean - UV and weather resistant - Resistant to industrial pollution.
- Resists extreme climatic conditions - Resists mould and fungal growth.
Product customisation
Don't forget to save your customization to be able to add to cartKeim Royalan is a high performance mineral paint system for use in extreme climatic conditions. KEIM Royalan offers water repellence, vapour permeability and forms a chemical crystalline bond with the substrate. Made using pure inorganic mineral fillers, absolutely lightfast inorganic pigments, additives and potassium silicate binder.
For all mineral, absorbent surfaces, in particular suitable for restoration coatings on repaired and stripped surfaces. Suitable for highly exposed surfaces, glass, ceramics and glazed surfaces.
Top Features & Benefits
In addition to being non-film forming and non-flammable, Keim Royalan also features the following:
- Water vapour permeable.
- Easy to clean.
- Mineral matt.
- UV and weather resistant.
- Resistant to industrial pollution and acid rain.
- Water repellent.
- Resists extreme climatic conditions.
- Resists mould and fungal growth.
Preparation & Application
Substrate Preparation
All loose, flaking and unstable material must be identified and then thoroughly removed, all surfaces must be thoroughly washed down with clean cold water to remove all surface dirt and dust. When all surfaces are clean, sound, wind dry, dust free and free from all surface contaminants, decoration using Keim Mineral Paints may proceed.
Application
Onto unpainted surfaces Keim Royalan should be applied as a two-coat system, the first coat to be diluted with 20% by weight Keim Royalan Dilution and applied by brush or roller, working well into all surfaces, with a minimum period of 12 hours between coats. For previously painted surfaces Keim Royalan Grob should be used as a first coat.
Application Conditions
Ambient and substrate temperature above 5°C and below 30°C. Do not apply in direct sunlight or onto sun-heated surfaces, nor if it is raining or if there is an immediate likelihood of rain. Clean tools with water immediately after use.
NBS Specifications
The NBS (National Building Specification) is a UK-based specification launched in 1973 and is used by building professionals and architects to describe the materials, standards and workmanship of a construction project. Keim provides documentation specific to this product that outline the NBS specifics. You can download these documents by locating the Keim Royalan product at the following link: Download the NBS Documents Here
Data sheet
- For Use By
- Consumer Use
- Interior / Exterior Use
- Exterior Use
- Colour
- Colour Tintable
- Single, Two or Three Pack
- Single
- Min. Application Temperature
- 5°C
- Colour(s)
- Standard Colours
- Base Type
- Water-Based
- Base Type
- Mineral Silicate
- Suitable For Use On
- Mineral Substrates
- Suitable For Use On
- Absorbent Substrates
- Finish
- Matt
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Product Usage Type
- Topcoat
- Product Range
- Royalan
- Colour Family
- Brown
- Colour Family
- Yellow
- Colour Family
- Off-White
- Colour Family
- White
- Colour Family
- Cream
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Categorised As
- Silicate & Mineral Masonry Paints
- Product Type
- Mineral Silicate
Questions
Question about the product
Julz Baker on 2023-05-31 00:35:35 | Question:
What are the exterior mineral paints made from? I want to ensure it’s a natural product. Kind regards Julz |
Answer from Rawlins’ Technical Team:
Keim Royalan is a mineral silicate paint, the ingredients that make up the product can be found in the Safety Data Sheet. This is available to download and view from the datasheets tab on the product page. | |
Deborah on 2023-05-09 18:45:29 | Question:
i have exterior brick walls with lime mortar which has been previously painted with sandtex - i am repointing now - and want to repaint - which of your paints would you reccomend ? |
Answer from Rawlins’ Technical Team:
Once all loose and flaking has been removed and any surface contaminants have been washed off and the surface is wind dry. You will need to first coat all bare lime mortar areas with Keim Royalan Dilution due to the porosity, we would then recommend going with a two coat system with Keim Soldalit Grob followed by a neat coat of Keim Royalan in the chosen colour (if it is a dark colour we would recommend a second coat of Keim Royalan.) With a minimum period of 12 hours between each coats. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Keim Royalan Mineral Masonry Paint is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT