- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Keim Restauro Fuge is a mineral dry bagged premixed restoration mortar with hydraulic binders. Functions as a joint replacement material, especially for natural stone walls.
- Easy to apply.
- Can be colour matched to the stone.
- Long-lasting.
Product customisation
Don't forget to save your customization to be able to add to cartKeim Restauro Fuge is a mineral dry bagged premixed restoration mortar with hydraulic binders. Functions as a joint replacement material, especially for natural stone walls. It can also be used for facing masonry (brick, sandstone) for joint repairing.
Top Features & Benefits
- Easy to apply.
- Can be colour matched to the stone.
- Long-lasting.
- Bulk density: approx. 1.55g/cm3.
- Water consumption: approx. 0.17 lt/kg.
- Processing time: max 45min.
- Setting time: more than 8 hours.
- Compressive strength: approx. 8N/mm².
- Bonding tensile strength: approx. 3N/mm².
- Modulus of elasticity: approx. 9KN/mm².
Preparation & Application
Substrate Preparation
Remove loose material and old coats mechanically or with a water pressure jet. All loose and friable material should be cut back to a sound level.
Preparation
Keim Restauro Fuge is to be mixed only with clean cold water, approximately 5lt per 30kg. For larger quantities use stirring machine or mixer. After a ripening period of 5 minutes the mortar should be of light flow properties. For moulding silicate resin moulds should be used.
Application
Press the prepared joint mortar firmly into the joint with a jointing tool. The new joint material should not be smoothed at the surface. For flush joints, Keim Restauro Fuge should be applied proud of the stone surface and any excess then removed with a palette knife during setting.
Application Conditions
Ambient and substrate temperature above 5°C and below 30°C. Do not apply in direct sunlight or onto sun-heated surfaces, nor if it is raining or if there is an immediate likelihood of rain.
Consumption
Approx. 0.2kg per linear metre for a joint depth and breadth of 1cm x 1cm. Determine actual consumption by tests on trial areas. Consumption rates are offered for guideline purposes only. Actual rates are the responsibility of the applicator. Project specifications should be referred to for specific rates.
Cleaning of Tools
Clean tools with water immediately after use.
Data sheet
- Manufacturer
- Keim
- For Use On
- Stone, Brick, Masonry
- Application Method
- Palette Knife
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Single
- Pack Size
- 30KG
- Min. Application Temperature
- 5°C
- UN Number
- N/A
- Suitable For Use On
- Masonry
- Suitable For Use On
- Stone
- Application Method
- Palette Knife
- Product Usage Type
- Mortar
- Product Range
- Restauro
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Brown
- Categorised As
- Stone Restoration and Repair
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Keim Restauro Fuge Joint Mortar is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT