Follow us on:

Coo-Var Industrial Floor Paint | 2,400+ Colours | Wood, Metal, Concrete, GRP
Coo-Var Industrial Floor Paint | 2,400+ Colours | Wood, Metal, Concrete, GRP
Coo-Var Floor Paint
Coo-Var Floor Paint

Coo-Var Floor Paint

110/G136/65/D
COO423
  • 2,400+ Colours.
  • Semi-gloss floor coating designed for a wide range of surfaces.
  • For wood, metal, concrete, and glass-reinforced plastic, both indoors and outdoors.
  • Protects against dirt, grime, oil and dust.

Product customisation

Don't forget to save your customization to be able to add to cart
  • 250 char. max
Colour Group
Size
Finish
£28.25(incl. VAT)
£23.54(ex. VAT)
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

questions 17 questions about the product
Description

Coo-Var Floor Paint

This single pack floor coating is a versatile and durable solution for a wide range of surfaces. Available in 12 vibrant colours, it is designed to protect and enhance the appearance of floors, walls, and other surfaces in both indoor and outdoor environments. With a semi-gloss finish, it offers not only aesthetic appeal but also practical protection against everyday wear and tear.



Application and Usage

The product is suitable for use on wood, metal, concrete, and glass-reinforced plastic, making it ideal for a variety of settings, including homes, commercial spaces, and industrial environments. It can be applied to floors, walls, ledges, and stairways. However, it should not be used on asphalt, bituminous surfaces, or thermoplastic floor tiles as it is not designed for these materials.

Before applying, surfaces must be properly prepared. For concrete surfaces, roughening may be required to ensure a good bond, which can be done mechanically or chemically using an acid etch. Existing painted surfaces should be cleaned, degreased, and sanded to create an adequate key for the new coating. It is important to follow the recommended overcoating times to achieve optimal results.



Performance and Durability

This floor coating provides robust protection against dirt, grime, oil, dust, and some solvents, making it suitable for areas with foot and light truck traffic. Its semi-gloss finish is not only easy to clean but also helps to maintain the coating’s integrity over time. The product is designed to dry quickly, with a touch-dry time of just a few hours and full hardness achieved within 5 to 7 days, depending on the ambient conditions.



Application Guidelines

For best results, mix the product thoroughly before use. Apply with a brush or roller, ensuring even coverage. The recommended application conditions should be adhered to, particularly regarding temperature and humidity. It is also important to ensure adequate ventilation during application and drying, especially in confined spaces.

Do not apply the coating in conditions of low temperature or high humidity, as these can adversely affect the drying and performance of the product. Always refer to the downloadable data sheet for detailed instructions and to ensure compliance with safety guidelines.



Recommended Complementary Products

For optimal adhesion and long-lasting performance, it is recommended to use the appropriate primers before applying this floor coating. For wood, consider using a penetrating wood primer, and for ferrous metals, a zinc phosphate metal primer is advised. For new concrete, use a thinned version of the floor paint or an alkali-resisting primer.



Health and Safety

  • UN Number: 1263

This product contains hydrocarbons and is classified as a flammable liquid (Category 3). It may cause drowsiness or dizziness and is harmful if swallowed. Protective gloves, clothing, and eye protection should be worn during application. VOC content is below 500 g/l, in compliance with EU regulations.

Product Details
423-947875

Data sheet

Manufacturer
Coo-Var
For Use By
Consumer Use
Interior / Exterior Use
Interior & Exterior
For Use On
Wood, Metal, Concrete, Glass Reinforced Plastic
Application Method
Brush, Rolller
Sheen
Semi-Gloss
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Single
Pack Size
1L, 2.5L, 5L
Parts
One
Application
Brush, Roller
Coverage
9-11m² per litre
Recommended Thinner/Cleaner
Thinners 14
Solids by Volume
48-51%
Touch Dry
4 Hours
UN Number
UN1263
Base Type
Solvent-Based
Suitable For Use On
Metal
Suitable For Use On
Concrete
Suitable For Use On
Wood
Suitable For Use On
GRP Glass-Reinforced Plastic
Finish
Semi-Gloss
Application Method
Brush
Application Method
Roller
Components
1K
Product Usage Type
Topcoat
Colour Family
Black
Colour Family
White
Colour Family
Beige
Colour Family
Grey
Colour Family
Green
Colour Family
Blue
Colour Family
Red
Colour Family
Brown
Colour Family
Pink
Colour Family
Orange
Colour Family
Purple
Colour Family
Yellow
Colour Family
Off-White
Product Type
Alkyd
Product Attributes
Tintable
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

* Required fields
(read)
questions Robert Graham on 2021-02-21 09:48:30
Question: 

We painted Coo Var solvent based floor paint throughout the house nine years ago. It has lasted extremely well (better than anything I've ever used before - not even a scratch on stairs!) but now needs refreshing here and there. I'm looking to avoid the fumes, so can we use Coo Var acrylic floor paint on top (after sanding, of course)? Would it bond to the original floor paint? If not, we'll use the original.

Answer from Rawlins’ Technical Team:

Assuming the previously painted surfaces are clean, dry, sound and prepared as detailed in the Technical Data sheet we can recommend Coo-Var Acrylic Floor Paint as a low odour alternative.

This can be applied over most previously applied coatings, but we would recommending testing for compatibility and adhesion prior to full application.

questions Michael Bryant on 2020-06-09 22:46:02
Question: 

I have a new build house with a garage. The floor is basically a layer of dusty lumpy concrete. Once swept can I just paint directly onto the floor?

Answer from Rawlins’ Technical Team:

No, for application to concrete - power floated, granolithic and smooth surfaces should be roughened first to provide a good "key" for the paint.

This can be done mechanically by abrading or blasting, or chemically using Coo-Var Acid Etch.

These processes will have the advantage in addition to preparing the surface of also removing dirt and laitance. New concrete must be allowed to cure thoroughly which can take up to 3 months.

The paint will mirror the profile of the substrate as such will not hide imperfections.

questions Steve on 2020-05-04 16:45:06
Question: 

How long does it take to fully dry?

Answer from Rawlins’ Technical Team:

This paint reaches full hardness in 5 - 7 days at 20°c.

questions C J Roberts on 2019-05-10 14:30:45
Question: 

What paint is healthy and safe to use on bedroom floor boards

Answer from Rawlins’ Technical Team:

'healthy and safe' is a broad statement and relatively vague as to what you require here but something like Coo-Var Acrylic Floor Paint would likely be a more suitable product to consider as this is water based and low odour.

questions Dianne Chlebek on 2019-04-28 16:13:33
Question: 

Can I use this on floor tiles. In a porch area.

Answer from Rawlins’ Technical Team:

No, assuming they are glazed tiles we would instead recommend Smartkote Protectakote Clear Primer Treatment followed by Smartkote Safekote.

questions chris keeble on 2018-08-20 22:15:05
Question: 

would this product be adversely affected if a vehicle with hot/wet tyres is parked on it

Answer from Rawlins’ Technical Team:

Providing that the concrete being painted is structurally sound, and the concrete has been prepared and product applied following the proper procedure (see product data sheet) hot tyre syndrome should not be an issue. However, we do always recommend the use of Coo-Var Profloor 2 Pack Epoxy Floor Paint in place of Coo-Var Floor Paint where vehicle traffic is expected as this would offer a far more robust and durable solution.

questions Chris williams on 2018-08-01 22:13:10
Question: 

Hi I just wanted to confirm this paint is ok for my concrete Drive ? Many thanks

Answer from Rawlins’ Technical Team:

Coo-Var Floor Paint can be used on exterior concrete however, Coo-Var do offer a specific product for driveways which would be preferred called Coo-Var Tennis Court & Drive Paint.

questions Donna burgin on 2018-07-12 12:41:36
Question: 

Regarding floor paint is it slippery when wet please as I want to use it on my outdoor concrete paths?

Answer from Rawlins’ Technical Team:

Coo-Var Floor Paint would be slippery when wet so we would instead recommend Coo-Var Suregrip Anti-Slip Floor Paint.

questions D Campbell on 2018-06-28 12:32:29
Question: 

Can this product be used on external patio ?

Answer from Rawlins’ Technical Team:

Coo-Var Floor Paint can be used internally and externally and assuming the patio is concrete, paving slabs or similar porous masonry substrate then this would be OK. Follow preparation guidelines on the product data sheet and apply the first coat of Coo-Var Floor Paint thinned 10% with Teamac/Coo-Var Thinner 14, then apply a second coat when dry, undiluted.

questions Marie Cresci on 2018-06-24 09:26:47
Question: 

Can I use this product on exterior floor slate?

Answer from Rawlins’ Technical Team:

No, unfortunately this product will not adhere to slate.

questions Mark Burton on 2018-06-05 09:28:27
Question: 

Can I use your floor paint product code 1263 on radiators ? Thanks M

Answer from Rawlins’ Technical Team:

We would instead recommend Coo-Var Radiator Enamel.

questions Sue Desmond on 2018-04-22 11:11:17
Question: 

What do you recommend for painting an exterior small patio sized rough concrete area please? It is a solid piece and has little foot traffic. Thank you

Answer from Rawlins’ Technical Team:

Coo-Var Floor Paint would be suitable for this assuming there is a damp proof membrane in the slab. See preparation and application details on the product page.

questions Jenny nurmi on 2018-02-11 16:19:22
Question: 

I want to paint my paving slabs driveway ( no cars go on it, just kids bikes!) what paint would be best and do I need a base coat and sealant on top? Thanks Jenny

Answer from Rawlins’ Technical Team:

Coo-Var Floor Paint could be used for this, to bare concrete you can apply the first coat of Coo-Var Floor Paint thinned 10% with Teamac/Coo-Var Thinner 14, then apply a second coat when dry undiluted.

questions Peter maestri on 2018-01-06 12:35:57
Question: 
Is their a minimum temperature below which I should not apply collar floor paint ?
Answer from Rawlins’ Technical Team:

Yes, substrate and air temperature should be above 10°C.

questions Owen on 2017-09-27 01:45:05
Question: 
What sealant/primer do you recommend to use prior to the application of this paint on fully cured but previously untreated concrete?
Answer from Rawlins’ Technical Team:

All surfaces should be clean, dry, sound and free from contaminants.

Concrete - power floated, granolithic and smooth surfaces should be roughened first to provide a good "key" for the paint. This can be done mechanically by abrading or blasting, or chemically using Coo-Var Acid Etch. These processes will have the advantage in addition to preparing the surface of also removing dirt and laitance. New concrete must be allowed to cure thoroughly which can take up to 3 months.

To prime prepared, bare concrete use Coo-Var Floor Paint thinned 10% or Coo-Var Alkali Resisting Primer.

questions alec newman on 2017-07-03 21:35:35
Question: 
Would this paint be alright on an exterior concrete path which has been previously painted.
Answer from Rawlins’ Technical Team:

Suitable for indoor and outdoor use, Coo-Var Floor Paint is compatible over most previous coatings and gives an off gloss finish.

questions mike on 2016-11-18 17:00:08
Question: 
If i was to remove the paint with a sander would the dust be toxic!
Answer from Rawlins’ Technical Team:

Any dust created wouldn't be toxic but we would always recommended wearing suitable PPE (Personal Protective Equipment) - i.e. face mask, gloves, goggles, etc. whilst carrying out preparation works.

IMPORTANT SHIPPING & DELIVERY INFORMATION

Coo-Var Floor Paint is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT


COVERAGE CALCULATOR
Units
Film Thickness
Total area²
Or enter length and width dimensions:
Length
Width

*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage

You might also like
General Painting Application Kit

General Painting Application Kit

Provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects, including uPVC surfaces, walls, ceilings, and more. Click to jump down to...

Price £12.08 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
Floor Application Kit

Floor Application Kit

Floor Application Kit from Rawlins Paints provides all the application equipment needed to apply conventional floor paints and coatings to a professional standard. The application of floor coatings is often crucial to their performance, so it is important to use the right tools to ensure a lasting finish. Each kit contains: 12" Roller,...

Price £101.80 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery