- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total (inc. VAT) £0.00
- Durable waterproofing solution for sloped roofs available in grey.
- For use on bitumen, cementitious, asphalt, plastics, and more.
- Forms a watertight, high-build, and elastic coating.
- Resistant to UV, acid rain, heat, frost, and pollution.
- Professional use only.
Description
Rust-Oleum Mathys Dacfill Waterproofing - Seamless Membrane for Roofing
Dacfill is a water-based liquid membrane designed for the waterproofing of roofs. It forms a seamless, elastic coat that provides excellent waterproofing for sloped roofs, with a minimum slope of 5%. Resistant to harsh weather conditions including UV radiation, acid rain, heat, and frost, ensuring long-lasting protection. Ideal for roofs, chimney slabs, and other surfaces that require a robust waterproof layer.
Features
- 100% watertight with high-build coating properties.
- Abrasion-resistant, rubber-like coat without joints or seams.
- Self-extinguishing and hardly flammable.
- Can be reinforced with Dacfill-fleece for added durability.
Application Instructions
Before applying Dacfill, ensure the surface is clean, dry, and free from any debris. For surfaces like roofing or bituminous materials over one year old, Dacfill can be applied directly. For metals such as zinc, galvanised steel, copper, lead, and aluminium, degreasing and slight sanding are recommended before application. Always stir the product thoroughly before use.
Limitations
- Not suitable for roofs with a slope less than 5% without Dacfill-fleece reinforcement.
- Do not apply on tar, soft PVC, or bituminous materials less than one year old.
- Avoid use on surfaces where water stagnation is frequent without proper reinforcement.
- Not designed for immersion purposes.
Recommendations
For added protection and durability, use Dacfill in combination with Dacfill-fleece, especially on roofs with slight slopes or potential water stagnation areas. Regular maintenance and inspection of the roof coating will ensure longevity and optimal performance.
Product Details
433-270068
Data sheet
- For Use By
- Professional Use
- Interior / Exterior Use
- Exterior Use
- For Use On
- Concrete
PVC
Polyester
Iron
Steel - Colour
- Standard / Ready Mixed
- VOC Levels
- Ultra-Low (5-49 g/l)
- Pack Size
- 5KG
25KG - Parts
- Single pack product
- Base Type
- Water based
- Dry to Handle (at 20°C)
- 6 Hours
- Dry to Recoat (at 20°C)
- 24 Hours
- Fully Cured (at 20°C)
- 1 Week
- Coverage
- Refer to data sheet
- Max. Application Temperature
- Max. Relative humidity: 80%
- Min. Application Temperature
- 5°C
- Density
- 1,5
- Solids by Volume
- 60 %
- VOC
- 5g/L
- Touch Dry
- 2 Hours
- Recommended Dry Film Thickness
- 600 micron (cons.: 1,5 kg/m²)
- Recommended Wet Film Thickness
- 1000 micron (cons.: 1,5 kg/m²)
- UN Number
- N/A
- Base Type
- Water-Based
- Suitable For Use On
- Concrete Roofs
- Suitable For Use On
- Asphalt Roofs
- Suitable For Use On
- Asbestos Roofs
- Suitable For Use On
- Polyester
- Suitable For Use On
- UPVC
- Suitable For Use On
- Pitched Roofs
- Suitable For Use On
- Steel
- Suitable For Use On
- Bituminous Surfaces
- Suitable For Use On
- Iron
- Finish
- Matt
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Usages
- UV Resistant
- Usages
- Waterproofing
- Product Usage Type
- Membrane
- Product Range
- Dacfill
- Fastest Delivery
- Next Working Day
- Colour Family
- Grey
Questions
Question about the product
 Juan on 2024-09-06 18:24:04 | Question: Can you use this on top of a new resin bound roof terrace? The terrace is letting in rain below. |
Answer from Rawlins’ Technical Team: No, this product wouldn't be suitable for this application type as it isn't intended for areas that are walked on such as terraces/balconies. Additionally, if the surface is a newly applied resin bound that is leaking, it is hard to say that a paint application would rectify this without the cause of the problem being remedied first. Please e-mail [email protected] with images of the areas leaking and additional details of your project requirements, to allow us to assist with possible alternatives. | |
| j sancroft on 2020-03-03 19:35:01 | Question: Is this product suitable for asbestos tiled roof. thanks |
Answer from Rawlins’ Technical Team: Yes it is, you will need to clean the roof inline with local legislation and apply two coats of Rust-Oleum Mathys Primer 44 HS before application. | |
| Geoff Lee on 2019-08-31 11:56:12 | Question: would Dacfill seal asbestos sheets where they over lap on the joints |
Answer from Rawlins’ Technical Team: Asbestos should be primed with Rust-Oleum Mathys Primer 44 HS, fill up joints with Rust-Oleum Mathys Elastofill, bridge active cracks with Rust-Oleum Mathys Dacfill Fleece in conjunction with Rust-Oleum Mathys Dacfill Waterproofing. | |
| Noel on 2019-07-28 17:59:39 | Question: Would this work on external brickwork to waterproof a wall and small cracks in the mortar etc. to stop water ingress? |
Answer from Rawlins’ Technical Team: No, but the Rust-Oleum Mathys Murfill Waterproofing Coating system would. | |
| gordon on 2018-01-26 14:09:21 | Question: Rust-Oleum Mathys Dacfill Waterproofing Hello is this product effective if applied to the inside face of the roof. i.e. from inside the garage to the ceiling side rather than climbing up onto an asbestos roof? Thank you |
Answer from Rawlins’ Technical Team: No, to provide waterproofing protection it must be applied to the top side of the roof. | |
| John Harrison on 2015-09-11 23:34:46 | Question: I am building a 4m x 3m summer house which will be attached on one side to a 2.1m x 5m shed. My intention is to roof the summer house with bitumous underfelt then lay a good quality top felt (to match the shed roof). The shed roof is ok, but beginning to show its age (8 yrs). Can the Dacfill be painted over the old felt to give it a new lease of life? And could it be painted over the new underfelt (instead of using a top felt) to match the shed? (or even straight on the new plywood roof?) |
Answer from Rawlins’ Technical Team: Rust-Oleum Mathys Dacfill Waterproofing wouldn't be the product to use but Rust-Oleum Mathys Dacfill HZ would. Without major complications you're only going to be able to paint the existing shed roof for now. Then when the new summer house roof has aged for more than 12 months you can paint that as well to match. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Rust-Oleum Mathys Dacfill Waterproofing is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
Mathys Parafix
We no longer stock this product, but can recommend Bullet Roof Quick Prime as a great alternative. Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450...
In stock
Rust-Oleum Mathys Dacfill Fleece
Reinforcement for Rust-Oleum Dacfill. Suitable for a variety of surfaces. Provides significant mechanical reinforcement, ensuring your surfaces withstand wear and tear over time. Enhances the waterproofing capabilities of Dacfill systems.
Price£334.78 (incl. VAT)
In Stock and Available for Delivery
Temporarily Out-of-Stock
Rust-Oleum Mathys Noxyde
We no longer stock this product, but have Rust-Oleum Mathys Noxyde - 5KG colours in clearance, for immediate dispatch!
In stock
Rust-Oleum Mathys Primer 44 HS
Available in grey. Designed for stabilising loose particles on brittle or weathered roofs, floors, and walls. For porous mineral substrates. Flexible, withstands temperature changes, offers quick water resistance. Professional use only. VOC compliant.
Price£86.17 (incl. VAT)
In Stock and Available for Delivery
Rust-Oleum Mathys Elastofill
Available in White, Grey or Brown Joint sealant designed for sealing, jointing, and filling applications. For concrete, wood, metal, glass, hard PVC, tiles, plaster, and alu-bitumen. Waterproof and highly elastic. Alkali resistant. Paintable.
Price£6.79 (incl. VAT)
In Stock and Available for Delivery
General Painting Application Kit
Provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects, including uPVC surfaces, walls, ceilings, and more. Click to jump down to...
Price£12.74 (incl. VAT)
In Stock and Available for Delivery