- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
We apologise for the current supply issue affecting some Bollom products. Whilst we await a resolution from the manufacturer, please see below some suggestions for alternatives.
If you’re looking for a system for;
- Walls & Ceilings see: Thermoguard Wallcoat BS Class 1/0 & EN Class B System
- Timber see: Thermoguard Timbercoat BS Class 1/0 & EN Class B System
- Steel see: Thermoguard Thermocoat WI 30 / 60 System
Still can’t find what you’re looking for? - Contact our Technical Team on 0113 2455450 (option 2)
Top coat in 4,400+ matt colours for Bollom Broflame Ultra Basecoat on bare and previously painted wood and Bollom Brosteel Ultra 60.
- Provides Class 0 on non-combustible surfaces.
Important!
- White and colours mixed on P and TR bases are temporarily unavailable
- Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Product customisation
Don't forget to save your customization to be able to add to cartDescription
Bollom Flameguard Ultra Vinyl Matt
Bollom Flameguard Ultra Vinyl Matt is a top coat for Bollom Broflame Ultra Basecoat on bare and previously painted wood, and Bollom Brosteel Ultra 60 for steel. Bollom Flameguard Ultra Vinyl Matt can also provide Class 0 on bare and previously painted non-combustible surfaces.
Preparation
Over Bollom Broflame Ultra Basecoat, Bollom Brosteel Ultra 60 and Bollom Fireshield Ultra Universal
- Ensure that the product to be coated is even and fully dry.
Over bare and previously painted non-combustible surfcaces
- Ensure the surface to be painted is sound, clean, dry and free from grease or any substance liable to give adhesion problems. Scrape off any old or flaking paint until you have a firm well adhered surface; if in doubt remove all existing coatings. For existing gloss and eggshell finishes wet abrade and rinse with clean water to remove any residues. Always apply Bollom Flameguard Ultra Primer / Undercoat prior to applying Bollom Flameguard Ultra Vinyl Matt.
Application
- Stir well before use.
- Applied by brush or roller.
- Flameguard Ultra Vinyl Matt must not be thinned.
- Coverage rates must be adhered to in order to achieve the fire rating.
- Throughout the period of application and drying the ambient and substrate temperature should be between 5-30°C with ambient relative humidity below 75%.
Coverage
- 12m² per litre / per coat.
- Over Bollom Broflame Ultra Basecoat, Bollom Brosteel Ultra 60 and Bollom Fireshield Ultra Universal one coat is normally sufficient but for dark contrasting colours two maybe required.
- For use over bare and previously painted non-combustible surfaces two coats are required over Bollom Flameguard Ultra Primer / Undercoat.
How do I get Fire Certification?
To obtain the completed certificates for a project customers should email [email protected] with the following details:
- Proof of purchase
- The contractors/applicators name and contact details (tel. no, email, address)
- Batch number(s) of product(s) used
- Site address
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Product Details
438-921729
Data sheet
- For Use By
- Professional Use
- Single, Two or Three Pack
- Single
- Coverage
- 12m² per litre
- Touch Dry
- 1 Hour
- Suitable For Use On
- Wood
- Suitable For Use On
- Steel
- Finish
- Matt
- Application Method
- Brush
- Application Method
- Roller
- Product Usage Type
- Topcoat
- Product Range
- Flameguard
- Fastest Delivery
- Next Working Day
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Dark
- Colour Family
- Anthracite Grey
- Colour Family
- Stone
- Colour Family
- Chartwell Green
- Colour Family
- Lilac
- Colour Family
- Beige
- Colour Family
- Salmon
- Colour Family
- Grey
Questions
Question about the product
Becca
on
2024-08-08 11:22:45
| Question:
in order to gain a certificate to Building Control, you mention that the contractor/applicator should be submitted. Does this have to be applied by a professional tradesman or can this be applied by anyone as long as following the instructions correctly? |
Answer from Rawlins’ Technical Team:
This product is only a topcoat that cannot achieve a level of fire protection on its own. If you are using this with Bollom Brosteel Ultra 60 on structural steel the manufacturer will only issue Certification to a competent contractor. Unfortunately this is not for consumer use, it is for professional use only. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Bollom Flameguard Ultra Vinyl Matt is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
You might also like
Bollom Brosteel Ultra 60
A new and improved revolutionary thin-film waterborne white intumescent paint for standard, interior structural steel members, providing 30 minutes fire protection in only one coat and 60 minutes in two coats - see below for details. For internal use only Water-based - quick drying thin-film intumescent coating Certificate of Conformance...
Price
£78.08
(incl. VAT)
In Stock and Available for Delivery
Bollom Broflame Ultra Basecoat
We apologise for the current supply issue affecting some Bollom products. Whilst we await a resolution from the manufacturer, please see below some suggestions for alternatives. If you’re looking for a system for; Walls & Ceilings see: Thermoguard Wallcoat BS Class 1/0 & EN Class B System Timber see: Thermoguard Timbercoat BS...
Price
£128.29
(incl. VAT)
Last items in stock
General Painting Application Kit
Provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects, including uPVC surfaces, walls, ceilings, and more. Click to jump down to...
Price
£12.74
(incl. VAT)
In Stock and Available for Delivery