Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.

Should you require training, visit - https://www.safeusediisocyanates.eu/

Sika Injection 107 is a ready-to-use 1-component, polyurethane based, slightly flexible, foaming injection resin for the permanent watertight sealing of cracks, voids and interstices in concrete.

Sika® Injection-107 is used for permanent watertight sealing with some flexibility to absorb limited movement, in water-bearing cracks and joints in concrete, brickwork and natural stone structures.

Sika® Injection-107 may only be used by experienced professionals.

Quick Links - Click To Jump To Section:

• Features & Benefits
• Product Information
• Application
• Limitations
• Health And Safety

Features & Benefits

• Ready-to-use.
• One component.
• Polyurethane based, slightly flexible, foaming injection resin.
• For the permanent watertight sealing of cracks, voids and interstices in concrete.
• Permanently elastic, can absorb limited movements.
• Sika® Injection-107 may only be used by experienced professionals.

Product Information

Packaging: Available in metal containers of: 10.6kg.

Shelf Life: 12 months shelf life from date of production if stored properly in undamaged, unopened, original sealed packaging.

Storage Conditions: Dry storage at temperatures from +5°C up to +35°C. Protect from direct sunlight and moisture.

Chemical Base: Moisture and water reactive one - component, foaming polyurethane resin.

Application

Substrate Preparation

• Surfaces of cracks, joints and voids need to be clean, free of loose and friable particles, with no dust, oil, grease or any other bond-breaking substances.
• Any dirt must be blown out with compressed air.
• Pre-wet access areas to make cleaning easier .

Application Method/Tools

• Sika® Injection-107 can be used with normal single component injection pumps.
• Empty the Sika® Injection-107 into the hopper of the single component pump and start the injection process.
• A secondary injection process must be carried out within the gel time (~30 minutes) of the first injection.
• The secondary injection can usually be carried out through the same packer.
• A new packer might have to be installed if the secondary injection is done more than 30 minutes after the first one.

Cleaning Of Tools

• Clean all tools and application equipment as soon as possible with Sika Thinner C or suitable solvent.

Limitations

• Only for professional contractors and trained personnel to use.
• Sika® Injection-107 can only be injected in moisture containing areas.
• For application in dry areas pre-inject with clean water.

Health And Safety

Further information about hazardous influences and protection are detailed in individual health and safety data sheets.

Please contact Rawlins Paints' Technical Support Team on 0113 2455450 (option 2) or send a message to [email protected] for more information.

Click to go back to the top of the page