- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Tikkurila Temadur 90, 2-pack, high gloss polyurethane paint recommended to be used as a glossy decorative finishing coat for epoxy systems on a variety of substrates such as steel, aluminium, concrete etc. exposed to severe weathering and/or chemical stress.
- Forms a durable, easy-to-clean and non-chalking topcoat with outstanding gloss and colour retention.
- Huge colour range available from RAL, BS & NCS
- Please note available colour and size combinations in long description
- Outstanding resistance to weathering and abrasion
- Ideal for original equipment manufacturing, such as agricultural machinery and haulage equipment
- Due to CE marking can also be used on top of coating systems used for concrete surfaces.
Product customisation
Don't forget to save your customization to be able to add to cartTikkurila Temadur 90 is a two-component, high gloss polyurethane paint, hardener aliphatic isocyanate that forms a durable, easy-to-clean and non-chalking topcoat with outstanding gloss and colour retention. Its outstanding resistance to weathering and abrasion makes the product a very good solution for original equipment manufacturing, such as agricultural machinery and haulage equipment, and is recommended to be used as a glossy decorative finishing coat for epoxy systems on a variety of substrates such as steel, aluminium, concrete etc. exposed to severe weathering and/or chemical stress.
Huge colour range available from RAL, BS & NCS
Please note available colour and size combinations:
- 1lt White
- 3lt White
- 10lt White
- 1lt Full RAL, BS & NCS Colour Range - Excluding Fluorescent but INCLUDING Metallic Shades
- 3lt Full RAL, BS & NCS Colour Range - Except Metallic & Fluorescent Shades
- 10lt Full AL, BS & NCS Colour Range - Excluding Fluorescent but INCLUDING Metallic Shades
- 20lt Full RAL, BS & NCS Colour Range - Except Metallic & Fluorescent Shades
For industrial and professional use only.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Technical Data
- Surface Preparation
- Recommended Primers
- Recommended Topcoats
- Application Conditions
- Mixing Components
- Application
- Thinners
- Cleaners
Features & Benefits
- Huge colour range available from RAL, BS & NCS
- Forms a durable, easy-to-clean and non-chalking topcoat with outstanding gloss and colour retention.
- The paint has an almost unlimited range of colors, including metallic effects
- Outstanding resistance to weathering and abrasion makes the product a very good solution for original equipment manufacturing, such as agricultural machinery and haulage equipment
- With special hardener Temadur 90 can be used for interior wooden surfaces, e.g. metallic shades kitchen doors
- Recommended to be used as a glossy decorative finishing coat for epoxy systems on a variety of substrates such as steel, aluminium, concrete etc. exposed to severe weathering and/or chemical stress
- Due to CE marking can also be used on top of coating systems used for concrete surfaces.
- Hardener 008 7594 is recommended to be used in hot and humid conditions
- The product has been tested for non-contamination of grain cargo at the Newcastle Occupational Health & Hygiene, Great Britain
- Recommended for, but not limited to:
- Transport and haulage equipment
- Storage tank exteriors
- Steel framework and other steel structures
- Machinery and equipment
Technical Data
- Volume Solids: 55±2% (ISO 3233)
- Weight Solids: 68±2%
- Specific Gravity: 1.2±0.1 kg / l (mixed)
- Pot Life (23℃): 4 hours
- VOC:
- The Volatile Organic Compounds amount is 420 g/litre of paint mixture.
- VOC content of the paint mixture (thinned 22% by volume) is 495 g/l.
- Mixing Ratio:
- Base: 5 parts by volume (Temadur 90)
- Hardener: 1 parts by volume (008 7590 or 008 7594)
Recommended Film Thicknesses and Theoretical Coverage
Recommended film thicknesses | Theoretical coverage | |
---|---|---|
Wet | Dry | |
75µm | 40µm | 13.7 m²/l |
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Drying Times
DFT 40 µm | 5°C | 10°C | 23°C | 35°C |
---|---|---|---|---|
Dust dry, after | 45min | 30min | 20min | 10min |
Touch dry, after | 12h | 8h | 4h | 2½h |
Recoatable, min. after | No limitations |
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Surface Preparation
Primed surfaces:
- Oil, grease, salt and dirt are removed from the surface by appropriate means.
- Repair any damage to the primer coat.
- Note the overcoating time of primer. (ISO 12944-4)
Concrete surfaces:
See the respective data sheets of concrete systems.
Recommended Primers
- Temacoat GPL-S Primer
- Temacoat GF Primer
- Temacoat GPL-S MIO
- Temacoat RM 40
- Temacoat SPA Primer
- Temacoat SPA 50
- Temabond ST 200
- Temabond ST 300
- Temadur 20
- Temaprime GF
- Temafloor PU
- Temafloor PU-UV
- Temafloor P300
- Temadur 10
Concrete surfaces:
More information in the respective data sheets.
Recommended Topcoats
Application Conditions
- All surfaces must be clean, dry and free from contamination.
- The temperature of the ambient air, surface and paint should not fall below 5℃ during application and drying.
- Relative humidity of the air should not exceed 80% during application and drying.
- The surface temperature of steel should remain at least 3°C above the dew point.
- Good ventilation and sufficient air movement is required in confined areas during application and drying.
Concrete surfaces:
- See the respective data sheets of concrete systems.
Mixing Components
- First stir base and hardener separately
- The correct proportions of base and hardener must be mixed thoroughly before use
- Use power mixer for mixing
- Insufficient mixing or incorrect mixing ratio will result in uneven drying of the surface and weaken the properties of the coating.
Application
- In order to obtain an even, non-porous finish, spray a misty coat: first a thin layer, then let the solvents evaporate for 5–30 minutes and then apply the full coat.
- For airless spraying, the product is thinned depending on the temperature of the components (base, hardener, thinner) approximately 10–22% to the viscosity 20–25s (DIN4)
- Recommended nozzle tip is 0.011"–0.013" and pressure 120–160 bar
- Spray angle shall be chosen according to the shape of the object
- For conventional spraying, the product is thinned to the viscosity 20–25s (DIN4)
- Recommended nozzle tip is 1.2–1.8 mm and pressure 3–4 bar
- For brush application product should be thinned according to the circumstances
Thinners
- Thinner 1048
- Thinner 1067
- Thinner 1061
- Thinner 1061 (fast) is also suitable for conventional spraying
Cleaners
Data sheet
- Manufacturer
- Tikkurila
- Interior / Exterior Use
- Interior & Exterior
- Single, Two or Three Pack
- Two-Pack
- Parts
- 2
- Base Type
- Polyurethane
- Interior/Exterior Use
- Both
- Solvent
- Mixture; see safety data sheet
- Mixing Ratio
- 5:1
- Suitable Substrates
- steel, aluminium, concrete. Can be used on interior wood with the correct hardener.
- Key Features
- Tested for non-contamination of grain cargo
- Application
- Brush, Spray
- Touch Dry (at 20°C)
- 4 hours
- Coverage
- 13.7 m²/l
- Recommended Thinner/Cleaner
- Thinner 1048, 1067, 1061
- Unit Contents
- Base & hardener
- Compatible Primers
- Temacoat GPL-S Primer; see data sheet for more
- Compatible Topcoats
- Temadur 90; see data sheet for more
- Solids by Volume
- 55±2% (ISO 3233)
- VOC
- 420 g/litre; VOC content of the paint mixture (thinned 22% by volume) is 495 g/l
- Recommended Dry Film Thickness
- 40µm
- Recommended Wet Film Thickness
- 75µm
- UN Number (Activator)
- UN1263
- UN Number (Base)
- UN1263
- Dry to Recoat (at 23°C)
- No limitations
- Touch Dry (at 23°C)
- 4h
- Pot Life
- 4 hours (23℃)
- Base Type
- Solvent-Based
- Suitable For Use On
- Primed Surfaces
- Finish
- High Gloss
- Application Method
- Brush
- Application Method
- Spray
- Usages
- Chemical Resistance
- Usages
- Abrasion Resistant
- Usages
- Atmospheric
- Usages
- Tough/Durable
- Usages
- Gloss Retention
- Usages
- Colour Retention
- Usages
- Weather Resistance
- Usages
- Easy to Clean
- Usages
- Non-Chalking
- Product Usage Type
- Topcoat
- Product Range
- Temadur
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Anthracite Grey
- Colour Family
- Beige
- Product Type
- Polyurethane
- Environment
- Atmospheric
- Touch Dry/Dust Free (@ 20-25°C)
- 4 hours
- Product Attributes
- High Build
- Resistance to
- Chemicals
- Resistance to
- Weather
- Resistance to
- Abrasion
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Tikkurila Temadur 90 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Tikkurila Temabond ST 200
2 component high-solids, aluminium pigmented modified epoxy maintenance paint for demanding surfaces such as steel structures, railway vehicles, and infastructure in energy and telecommunications. Surface-tolerant high-solids epoxy paint. Very good adhesion even to hand-prepared steel. Lower VOC emissions than conventional epoxy paints....
Tikkurila Temabond ST 300
Tikkurila Temabond ST 300 is a two-component high-solids, modified tintable epoxy maintenance paint for demanding surfaces, and is recommended for repairing of damages caused by transport or installation. Surface-tolerant with a wide colour range For steel and concrete surfaces Very good adhesion, even to hand-prepared steel Lower VOC...
Tikkurila Temacoat GF Primer
Tikkurila Temacoat GF Primer is a two component, polyamide cured epoxy primer containing zinc phosphate that is used as a primer for steel, zinc and aluminium surfaces. For industrial and professional use only For use in epoxy and polyurethane systems For use where high requirements for appearance are set Recommended for agricultural...
Tikkurila Temacoat GPL-S MIO
Tikkurila Temacoat GPL-S MIO is a two-component, polyamide cured epoxy paint pigmented with micaceous iron oxide, with superior adhesion to steel surfaces forming a very strong and durable film that can be used as a primer or an intermediate coat in aggressive environments Fast cure and low-temperature cure hardeners available - click to...
Tikkurila Temacoat GPL-S Primer
Tikkurila Temacoat GPL-S Primer is a two-component, polyamide-cured high build epoxy primer containing zinc phosphate. Excellent adhesion to steel, zinc and aluminium surfaces. Used as a primer or an intermediate coat in paint systems exposed to abrasion and chemical stress. Can be overcoated after a prolonged period of time. Faster...
Tikkurila Temacoat RM 40
2-component, resin modified epoxy primer/topcoat with 4,000+ colours that can be used as a single-coat system. Good adhesion to steel, zinc and aluminium surfaces exposed to severe abrasion or chemical stress. Suitable for concrete surfaces and has a CE marking. Can be used on steel structures in wet environments, e.g. inside pontoons,...