Zinsser B-I-N Aerosol - advanced, shellac-based primer sealer, stain killer, and bond coat

It is designed to deliver outstanding performance for a variety of interior surfaces, ensuring a smooth and durable finish, in an easy-to-use aerosol format.

Application and Uses

• For interior use on ceilings, walls, doors, trim, cabinets, and furniture.
• Ideal for blocking water, grease, rust, smoke, asphalt, graffiti, and other stains.
• Perfect for spot priming exterior surfaces such as knots, sap streaks, and rust stains before applying a full-surface primer.

Performance Characteristics

• Quick-drying formula: touch dry in 10 minutes, recoat in 45 minutes.
• Excellent adhesion to glossy surfaces without the need for sanding.
• Seals porous surfaces, providing an excellent base for topcoat paints.
• Permanently blocks odours and stains, including smoke and urine.

Surface Preparation

Ensure surfaces are clean, dry, and free from dust, dirt, grease, oil, wax, and mildew. Remove any loose paint and sand the surface smoothly. For best results, wash surfaces with a household ammonia solution and rinse well. Follow safety guidelines when handling cleaning solutions.

Restrictions and Limitations

Not recommended for use on floors or in high-traffic areas. Avoid using on surfaces where food items will come into direct contact. Ensure proper ventilation during application and drying. Do not apply in high humidity or below freezing temperatures.

Safety Information

Zinsser B-I-N Aerosol contains acetone and other solvents. It is highly flammable and should be kept away from heat, sparks, and open flames. Use in a well-ventilated area and wear appropriate protective equipment. In case of contact with eyes or skin, rinse thoroughly with water and seek medical attention if necessary.

Safety Information

UN Number: UN1950.

Highly flammable aerosol, causes serious eye damage, may cause allergic skin reactions, drowsiness, or dizziness. Avoid inhalation and use protective equipment.

Contains Diisocyanates: No