- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- Available in white.
- Primer for use on power-floated concrete, tiles, non-ferrous metals, and thermosetting plastics.
- Low odour, excellent flow.
- Can be recoated with many 2K paints.
- Resists light to moderate abrasion, humidity, and chemical cleaning.
Rust-Oleum 3333 Super Adhesion Primer - Water Based Primer for Non-Porous Floors
The 3333 Super Adhesive Primer is a water-based epoxy primer specifically designed for use on smooth floors, such as power-floated concrete and tiles. It provides excellent adhesion on non-porous, dense mineral substrates, non-ferrous metals, and thermosetting plastics. This primer ensures a perfect chemical bond without the need for blasting or etching, making it a cost-effective solution with low material usage and low odour.
Recommended Applications
Super Adhesive 3333 is ideal for use on the following surfaces:
- Non-porous, dense mineral substrates like tiles and power-floated concrete.
- Non-ferrous metals including stainless steel, aluminium, and new hot-dip galvanized steel.
- Thermosetting plastics such as fibreglass-reinforced polyester or epoxy.
When recoated with the appropriate Rust-Oleum system, it can resist light to moderate abrasion, intermittent high humidity and moisture, regular chemical cleaning, and spillage of chemicals.
Application Instructions
For optimal results, follow these application instructions:
- Stir individual components thoroughly before mixing them together.
- Apply with a brush, roller, or air-atomised spray, diluting with up to 20% water.
- Ensure the temperature of the air and substrate is between 10 and 35°C, with relative humidity below 70%.
- The substrate must be clean and may be slightly damp during application.
- Check wet film thickness and avoid excessive film thickness.
- For cleaning equipment and spills, use hot water and soap immediately after application.
Restrictions and Limitations
Do not attempt to apply a hiding coat as it may cause adhesion issues and water sensitivity. Avoid application if the relative humidity is high, as curing may be retarded. Refer to the downloadable data sheet for detailed application guidelines and safety measures.
Why Choose 3333 Super Adhesive Primer?
This primer stands out due to its versatility and superior performance on a variety of substrates. It provides an excellent foundation for subsequent coatings, ensuring durability and long-lasting protection. The water-based formulation offers a low-odour application experience, making it suitable for use in sensitive environments.
Health and Safety
Ensure proper safety measures are in place when handling 3333 Super Adhesive Primer. The product contains epoxy constituents and may produce an allergic reaction. Use appropriate protective equipment and avoid inhaling vapours or spray. For detailed safety information, refer to the MSDS.
- UN Number: UN3082 (Activator), UN3066 (Base)
- Safety Information: Wear protective gloves and eye protection. Avoid release to the environment. Dispose of contents and container in accordance with local regulations.
Data sheet
- Manufacturer
- Rust-Oleum
- For Use By
- Consumer Use
- Interior / Exterior Use
- Interior Use
- For Use On
- Floors
Concrete
Tiles
Stainless Steel
Aluminium
Epoxy - Application Method
- Brush
Roller
Spray - Sheen
- Satin
- VOC Levels
- Ultra-Low (5-49 g/l)
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 1L
5L - Application
- Brush, Roller, Spray
- Dry to Handle (at 20°C)
- 8 Hours
- Dry to Recoat (at 20°C)
- 16 hours (20°C)
24 hours (10°C)
12 hours (30°C) - Fully Cured (at 20°C)
- 8 Days
- Coverage
- 41.2m² per litre
- Density
- 1,58
- Solids by Volume
- 61,9 %
- Heat Resistance (up-to)
- 150°C (dry heat)
- Touch Dry
- 6 Hours
- UN Number
- UN3066
- Base Type
- Water-Based
- Suitable For Use On
- Concrete
- Suitable For Use On
- Tiles
- Suitable For Use On
- Aluminium
- Suitable For Use On
- Stainless Steel
- Suitable For Use On
- Floors
- Suitable For Use On
- Power Floated Concrete
- Finish
- Satin
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Manufacturer
- Rust-Oleum
- Components
- 2K
- Product Usage Type
- Adhesion Primer
- Fastest Delivery
- Next Working Day
- Colour Family
- Translucent White
- Product Type
- Epoxy
Questions
Question about the product
Barbara on 2022-12-02 07:23:22 | Question:
Is this product suitable as a primer for old concrete floors, as the spec says for dense, power-floated concrete? I think the floor I want to paint could be a bit porous, and is a bit pitted in places. I want to paint it with Rust-oleum 7200. Water gets splashed on it and it’s walked over a lot. |
Answer from Rawlins’ Technical Team:
No this primer is not suitable for application to a porous floor or compatible with Rust-Oleum 7200 Floorcoat PU. Assuming the concrete floor is bare, clean, dry, sound and prepared as detailed in the technical data sheet Rust-Oleum 7200 Floorcoat PU can be applied directly. The first coat should be thinned 5% with Rust-Oleum Thinner 633. | |
Shah on 2022-02-27 17:59:03 | Question:
Could pls tell me the primer is applicable for stainless steel pipe for painting? |
Answer from Rawlins’ Technical Team:
Yes this can be applied to non-ferrous metals like stainless steel, aluminium or hot-dip galvaninsed steel, assuming it is clean, dry, sound and prepared as detailed in the technical data sheet. | |
Bill King on 2021-04-27 06:05:54 | Question:
Hi, do you have a Matt black or can you add a colour dye to this.Thanks Bill. |
Answer from Rawlins’ Technical Team:
I'm afraid we wouldn't recommend introducing any form of dye or colourant to this product, it is available in clear only. It cannot be left as a finish though so a topcoat must be used. | |
Dave on 2019-05-02 07:47:24 | Question:
Hi could you advise me if this product is suitable for priming porcelain floor tiles?and if so what you recommend as a top coat/sealer? |
Answer from Rawlins’ Technical Team:
Yes, clean thoroughly and lightly abrade before application. We would suggest finishing with Rust-Oleum 9200 Rust-O-Thane. | |
amanda on 2019-04-23 13:23:34 | Question:
Hi Can you tell me what area of coverage will I get from one litre of the super adhesion primer please? Thanks Amanda |
Answer from Rawlins’ Technical Team:
The theoretical coverage for Rust-Oleum 3333 Super Adhesion Primer is 41m²/litre | |
claire on 2018-07-23 22:57:33 | Question:
I have some clay tiles (like quarry tiles but says made of clay) I have old quarry tiles cleaned and sealed but the new ones in clay don't hold the sealer. It easily comes off with bare feet or if it gets wet with washing up water etc in kitchen. Should I apply a clear primer over the top of the sealant that has just been put on for the 3rd time or which primer would you suggest? Is there a clear primer/ sealant which would stick to the tiles please and provide protection. Gloss preferably as the old quarry tiles have been gloss sealed. thanks |
Answer from Rawlins’ Technical Team:
Our best recommendation for this would be to remove all existing coatings and try a test area with Rust-Oleum 4900 Polycoat 2K to ensure it is suitable before coating the whole area. | |
Sharon on 2017-01-12 08:04:05 | Question:
Hi could you tell me the difference between Rust-Oleum super adhesive primer 333 and and the 333 handy pack.
Thanks,
Sharon |
Answer from Rawlins’ Technical Team:
There is no difference between the products, the Handy Pack has been developed to make one off smaller projects easier with more user friendly packaging and instructions. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Rust-Oleum 3333 Super Adhesion Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Rust-Oleum FK111 Cleaning Solution
We no longer stock this product; please contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to find an alternative product. Rust-Oleum FK111 Cleaning Solution is a concentrated, alkaline, non-flammable, virtually odour free cleaning and degreasing solution for vertical...
General Painting Application Kit
Provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects, including uPVC surfaces, walls, ceilings, and more. Click to jump down to...
Floor Application Kit
Floor Application Kit from Rawlins Paints provides all the application equipment needed to apply conventional floor paints and coatings to a professional standard. The application of floor coatings is often crucial to their performance, so it is important to use the right tools to ensure a lasting finish. Each kit contains: 12" Roller,...