- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Top coat in 4,400+ eggshell colours for Bollom Broflame Ultra Basecoat on bare and previously painted wood, and Bollom Brosteel Ultra 60 for steel.
- Provides Class 0 on non-combustible surfaces.
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Product customisation
Don't forget to save your customization to be able to add to cartBollom Flameguard Ultra Acrylic Eggshell
Bollom Flameguard Ultra Acrylic Eggshell is a top coat for Bollom Broflame Ultra Basecoat on bare and previously painted wood, and Bollom Brosteel Ultra 60 and for steel. Bollom Flameguard Ultra Acrylic Eggshell can also provide Class 0 on bare and previously painted non-combustible surfaces.
Preparation
Over Bollom Broflame Ultra Basecoat, Bollom Brosteel Ultra 60 and Bollom Fireshield Ultra Universal
- Ensure that the product to be coated is even and fully dry.
Over bare and previously painted non-combustible surfcaces
- Ensure the surface to be painted is sound, clean, dry and free from grease or any substance liable to give adhesion problems. Scrape off any old or flaking paint until you have a firm well adhered surface; if in doubt remove all existing coatings. For existing gloss and eggshell finishes wet abrade and rinse with clean water to remove any residues. Always apply Bollom Flameguard Ultra Primer / Undercoat prior to applying Bollom Flameguard Ultra Acrylic Eggshell.
Application
- Stir well before use.
- Applied by brush or roller.
- Flameguard Ultra Vinyl Matt must not be thinned.
- Coverage rates must be adhered to in order to achieve the fire rating.
- Throughout the period of application and drying the ambient and substrate temperature should be between 5-30°C with ambient relative humidity below 75%.
Coverage
- 12m² per litre / per coat.
- Over Bollom Broflame Ultra Basecoat, Bollom Brosteel Ultra 60 and Bollom Fireshield Ultra Universal one coat is normally sufficient but for dark contrasting colours two maybe required.
- For use over bare and previously painted non-combustible surfaces two coats are required over Bollom Flameguard Ultra Primer / Undercoat.
Drying Time
4hrs @ 20°C per coat. Allow to dry for a minimum of 4hrs @ 20°C between coats.
How do I get Fire Certification?
To obtain the completed certificates for a project customers should email [email protected] with the following details:
- Proof of purchase
- The contractors/applicators name and contact details (tel. no, email, address)
- Batch number(s) of product(s) used
- Site address
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.