Wethertex MS11 Multi-Surface Renovation Paint - Versatile High-Performance Protective Coating

Designed to provide a durable, decorative satin finish. Perfect for both interior and exterior applications, it offers superb adhesion to various substrates while being highly vapour permeable and water-shedding. This paint is self-priming and resistant to flash rust, making it an excellent choice for a wide range of surfaces.

Applications

• Ideal for use on steel, aluminium, galvanised steel, ceramic tile (excluding showers/wet rooms), PVC, wood, brick, concrete block, stone, plaster, pre-cast concrete, render, fibre cement board, plaster boards, and calcium silicate boards.
• Not suitable for areas under constant water contact, such as shower cubicles or high-traffic areas like worktops and handrails.

Preparation and Application

Ensure all surfaces to be painted are clean, dry, and free from grease, loose or flaking material, and other contaminants. Rub down previously painted surfaces with fine waterproof abrasive paper and rinse thoroughly. Bare substrates should be similarly abraded to improve adhesion.

Apply using a brush, roller, conventional H.V.L.P, or airless spray. Stir well before use and avoid applying the paint at air or surface temperatures below 8°C or when rain is likely before the paint has fully dried. Ensure good ventilation during application and drying.

Limitations and Recommendations

• Do not apply below 8°C or above 25°C.
• Avoid use on substrates treated with water-repellent preservatives, as adhesion may be compromised.
• Not recommended for horizontal decking areas and floors or hot surfaces like radiators unless cooled before application.

For the best results, follow the recommended preparation and application methods. Refer to the downloadable data sheet for more detailed information.

Additional Products

Consider pairing the Wethertex MS11 Multi-Surface Renovation Paint with other Wethertex products for a comprehensive renovation solution.

Health and Safety

Contains a mixture of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one. May produce an allergic reaction. Harmful to aquatic life with long-lasting effects. Avoid release to the environment and dispose of contents/container to hazardous or special waste collection points in accordance with local, regional, national, and/or international regulation.