- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total (inc. VAT) £0.00
- Available in a wide range of colours.
- Ideal for application on slightly damp or dry metal surfaces.
- Requires minimal surface preparation.
- Durable corrosion protection.
- Optimal rust inhibition.
- Certified for C4 exposure conditions (ISO 12944) and VOC compliant (375 g/l).
Product customisation
Don't forget to save your customization to be able to add to cartDescription
Rust-Oleum 769/780 Damp-Proof Rust Primer - Corrosive Protection Primer
Rust-Oleum 769 Damp-Proof Rust Primer is a single pack primer based on a fish oil containing alkyd. This unique formulation allows direct application on slightly moist or dry metal surfaces, making it ideal for rusted steel surfaces. The primer penetrates rust to expel moisture and air, encapsulating rust for superior protection.
Application & Surface Preparation
Before applying the primer, ensure surfaces are free from grease, oil, and other contaminants using a cleaner or high-pressure steam. Remove loose rust and coatings by scraping, wire brushing, or light sanding. The primer can be applied with a brush, roller, or spray, with recommended thinning using Rust-Oleum Thinner 633 for brush and roller, and Thinner 641 for spray applications.
- Brush: Dilute up to 10% with Thinner 633.
- Roller: Dilute up to 10% with Thinner 633, using medium pile rollers.
- Airless Spray: Dilute up to 5% with Thinner 641, using a tip size of 0.013-0.015 inches.
- Air-atomised Spray: Dilute 10-20% with Thinner 641, using a tip size of 1.2-1.8 mm and 2-4 bar pressure.
The primer is touch dry within 4 hours and can be recoated after 24 hours. Ensure all tools are cleaned with Rust-Oleum Thinner 160 or mineral spirits after use.
Why Choose Rust-Oleum 769?
Rust-Oleum 769 is a trusted choice for rust protection, combining ease of application with long-lasting results. Its fish oil-based formula has been proven since 1921 to provide effective rust inhibition. Suitable for light industrial exposure, this primer ensures your metal surfaces are well-protected against the elements.
Health and Safety
Always refer to the safety data sheet for comprehensive health and safety information. The product is classified under UN1263, with hazard statements including H226 (Flammable liquid and vapour) and H336 (May cause drowsiness or dizziness). Proper ventilation and protective gear are recommended during application.
Product Details
544-897974
Data sheet
- Manufacturer
- Rust-Oleum
- For Use By
- Consumer Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Bare Metal
Blasted Metal
Rusted Metal - Application Method
- Brush
Roller
Spray - Sheen
- Matt
- Colour
- Fully Tintable
- Single, Two or Three Pack
- Single
- Pack Size
- 5L
- Dry to Handle (at 20°C)
- 8 Hours
- Dry to Recoat (at 20°C)
- After 24 Hours
- Fully Cured (at 20°C)
- 8 Days
- Recommended Thinner/Cleaner
- RUST-OLEUM Thinner 160
- Max. Application Temperature
- 35°C
- Min. Application Temperature
- 5°C
- Density
- 1.33g/cm³
- Solids by Volume
- 50%
- Heat Resistance (up-to)
- 120°C (dry heat)
- Heat Resistance (up-to)
- 120°C (Dry heat)
- VOC
- 375g/L
- Shelf Life (from date of manufacture)
- 5 years
- Touch Dry
- 4 Hours
- Recommended Dry Film Thickness
- 35 µm
- Recommended Wet Film Thickness
- 70 µm
- UN Number
- UN1263
- Consumption
- 14.5m²/L
- Colour(s)
- Fully Tintable
- Base Type
- Alkyd
- Base Type
- Solvent Based
- Suitable For Use On
- Steel
- Suitable For Use On
- Blasted Metal
- Suitable For Use On
- Bare Metal
- Suitable For Use On
- Rusted Metal
- Finish
- Matt
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Manufacturer
- Rust-Oleum
- Usages
- Moisture Tolerant
- Usages
- Rust Primer
- Usages
- Atmospheric
- Usages
- Anti-Corrosive
- Product Usage Type
- Primer
- Fastest Delivery
- Next Working Day
- Colour Family
- Violet
- Colour Family
- Cream
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Off-White
- Colour Family
- Black
- Colour Family
- Magnolia
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Anthracite Grey
- Dry to Recoat (@ 20-25°C)
- 24 hours
Questions
Question about the product
 Tony on 2023-12-19 17:07:56 | Question: Can you use this over the top of old paint on metal external stairs |
Answer from Rawlins’ Technical Team: No, this product wouldn't be suitable for application to previously painted metal. If you can confirm the type of metal you are looking to re-paint, we maybe able to offer an alternative, you can e-mail [email protected] to confirm. | |
| Richard on 2023-08-30 08:35:22 | Question: Im looking to use this on the inside of automotive panels and pillars as part of a restoration project. Eventually, i intend to prime the whole car in an epoxy primer, will this be compatible? If so, can you recommend an epoxy primer to use too? |
Answer from Rawlins’ Technical Team: Assuming the panels are steel this product will be suitable to use as a Primer to be applied in accordance with the technical data sheet. This can be over coated with either Rust-Oleum CombiColor Original or Rust-Oleum 7500 Alkythane as the finishing coat. These products are both available to 4400+ RAL, BS & NCS Colours in a satin or gloss finish. The manufacturer doesn't recommend applying an Epoxy Primer over Rust-Oleum 769/780 Damp-Proof Rust Primer. | |
| Natalie on 2023-04-30 14:43:20 | Question: Is this primer and the Rust-Oleum 7500 Alkythane topcoat appropriate for use on Cast Iron? Thanks |
Answer from Rawlins’ Technical Team: Yes assuming the cast iron is bare, clean, dry, sound and free from rust or corrosion. | |
| Cindy on 2023-03-06 16:01:14 | Question: Can I paint acrylics over this primer? |
Answer from Rawlins’ Technical Team: The recommended topcoat for this primer is Rust-Oleum 7500 Alkythane. If you choose to use any other type of paint we would recommend to test on a small area for compatibility and adhesion prior to full application. | |
| Nigel Sykes on 2022-12-08 07:20:15 | Question: Hello, Is the 769/780 suitable for use when repainting the inside of a steel boat hull? This will be in January/February and although de-rusted as far as possible will probably still be damp and no doubt cold! Also, after it has cured can it be over coated with a two pack epoxy type paint… this type of top coat would be preferred to protect against oil, fuel and other chemical spills Thank you nin anticipation, Nigel. |
Answer from Rawlins’ Technical Team: Unfortunately no this product would not be suitable for this application. Assuming application will take place when the substrate temperature is above 5°C and the relative humidity is less than 80% with the temperature 3 degrees above the dew point so no condensation forms you can consider the two pack option below. All rust and corrosion must be removed, the area should be clean, dry, sound and prepared as detailed in the technical data sheet then Teamac High Performance 2 Pack Zinc Phosphate Primer applied followed by two coats of Teamac High Performance Polyurethane Topcoat. This is available in many RAL, NCS or BS colours in a gloss finish. | |
| Gabriel on 2022-02-17 14:43:02 | Question: Hello! Is it possible to paint over this primer with Rust-Oleum High temperature resistant paint (1078)? Thank you! |
Answer from Rawlins’ Technical Team: Assuming the substrate will be exposed to dry heat, no this primer would not be suitable for this application. Rust-Oleum Heat Resistant Paint 750°C is self priming for many substrates. | |
| Mark harris on 2021-03-15 12:43:25 | Question: Can you use any brand / type of thinners with Rust-Oleum 769/780 Damp-Proof Rust Primer? Many thanks Mark. |
Answer from Rawlins’ Technical Team: We would recommend using the Rust-Oleum thinners as listed on the technical data sheet. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Rust-Oleum 769/780 Damp-Proof Rust Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
You might also like
Rust-Oleum Thinner 641
High performance thinner, for use on metal primers and floor coatings. High diluting capacity based on aromatic hydrocarbons. Specifically designed for spray applications. Consult the respective product data sheet for further details. Professional use only.
Price£77.78 (incl. VAT)
In Stock and Available for Delivery
Rust-Oleum Thinner 160
High dilution capacity thinner. Can be used on various Rust-Oleum coatings and as a strong glue remover. Long shelf life of up to 5 years when stored correctly. For professional use.
Price£22.79 (incl. VAT)
In Stock and Available for Delivery
Rust-Oleum Thinner 633
Highly diluting solvent for alkyd-based coatings. Ideal for cleaning and thinning alkyd resin-based products. For metal, wood, and floors. High VOC level of 755 g/l. Compatible with several Rust-Oleum primers and floor coatings. Professional use only.
Price£16.26 (incl. VAT)
In Stock and Available for Delivery
Rust-Oleum 7500 Alkythane
4,400+ Colours in a Satin or Gloss finish. For metal surfaces, primed or previously coated. High opacity and corrosion protection. Enhanced with polyurethane for extra durability. Ideal for low-temp applications.Buy A Paint Colour Sample
Price£128.04 (incl. VAT)
In Stock and Available for Delivery
General Painting Application Kit
Provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects, including uPVC surfaces, walls, ceilings, and more. Click to jump down to...
Price£12.74 (incl. VAT)
In Stock and Available for Delivery
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools)1 x Rust-Oleum...
Price£30.50 (incl. VAT)
In Stock and Available for Delivery