Kolorbond Hypakolor | Technispray Boat & Marine Spray Paint | 5,000+ Colours

Kolorbond Hypakolor

Reference Tech5749

Brand Kolorbond

Search ID KOL5749

Flexible surface coating in 5,000+ colours.
For flexible substrates including rubber seals, gaskets, automotive trim, industrial components, soft plastic parts.
Excellent adhesion without cracking, chipping, peeling or flaking when applied correctly.
Touch dry in 3–5 minutes with full cure in 24 hours at room temperature or 50 minutes at 50°C.
Spray applied using HVLP systems – DeVilbiss JGHV 522-1 recommended for consistent finish and film control.

Important!

Performance and guarantees not valid without purchase and use of the relevant cleaning products.

Product customisation

Don't forget to save your customization to be able to add to cart

Colour Group

Size

Finish

Option

£46.80(incl. VAT)

£39.00(ex. VAT)

Quantity

Please choose your colour

Available for Delivery (See Delivery Options Below)

ColourPicker Explained

In general we sort colours for products into 2 main groups - ‘Ready Mixed’ and ‘Tinted’.
Tinted colours will always be more expensive than Ready Mixed colours as they need to be produced at the time of order using a tinting machine dispensing colourant into a base*.
During busy periods, this means that tinted colours could take longer, for example – a ready mixed colour ordered on a 3-5 day delivery might arrive within 3 days, however a tinted colour might take the full 5 days to arrive.

To find Ready Mixed colours, search "ready mixed" or select the Ready Mixed 'colour chart'. To see Tinted colours select a colour chart such as RAL, BS, NCS, etc. or search for a colour/hue to see available or related options.

To ensure fair pricing, we split colours into ‘Price Bands’ to group together similar priced colours. If you wish to search for the cheapest tinted colours, always select Price Band 1.

We make every effort to list all available colours, however we also offer a colour match service which can be accessed by contacting our Technical Team on 0113 245 5450 (option 2) or emailing [email protected]

*Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour

Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes.

No queries yet, leave the first!

Description

Specialist Coating for Flexible Surfaces

Hypakolor is a professional-grade coating developed for use on rubber and flexible substrates. It chemically bonds with the surface to reinforce and protect, delivering a finish that resists cracking, peeling or flaking when applied correctly. It is ideal for automotive, industrial, and specialist applications where flexibility and durability are essential.

Applications and Compatible Substrates

This product is suitable for use on rubber seals, gaskets, flexible automotive trim, cable sheaths, industrial parts and soft plastics. It is applied using HVLP spray systems and is compatible with pressure-fed setups. Hypakolor is best suited for professional spraying environments and should not be used on food contact surfaces or in areas where excessive heat exposure is expected.

Performance and Film Characteristics

Once applied, the dry film achieves a typical thickness of 20–30 microns, depending on the colour. The coating provides a gloss level of 50 ± 5% at 60°, and has excellent adhesion and resistance to environmental stress. Full curing can be achieved in 24 hours at ambient temperature or accelerated through oven curing for 50 minutes at 50°C.

Application Guidance

Use an HVLP cup gun such as the DeVilbiss JGHV 522-1 with a 1.0 mm tip. Apply in thin, even coats allowing 10–15 minutes flash-off between each layer. No thinning or reduction is required. Ensure adequate ventilation and clean equipment thoroughly with suitable gun cleaning solvents between uses.

Limitations and Safety Advice

Do not apply near open flames or heat sources. Do not expose containers to direct sunlight or store above 50°C. Hypakolor is a flammable liquid and must only be handled by trained professionals wearing appropriate PPE. Avoid use on surfaces exposed to direct food contact. Always refer to the downloadable technical data sheet for full application instructions.

Health and Safety

This product is classified as flammable and harmful. Contains solvents such as Butanone, Ethyl Acetate and Xylene. May cause serious eye irritation and allergic skin reactions. UN No. 1263. Contains Diisocyanates – professional training may be required. Ensure all safety instructions are followed and refer to the MSDS before use.

Product Details

Reference 5749-893978

Data sheet

Manufacturer: Kolorbond
Interior / Exterior Use: Exterior Use
Water / Solvent Based: Solvent
For Use On: Rubber
Application Method: Spray
HVLP
Sheen: Satin
Colour: Fully Tintable
Single, Two or Three Pack: Single
Pack Size: 400ml Aerosol
1L
5L
20L
Recommended Thinner/Cleaner: Gun Cleaner
Solids by Volume: 11.2 (Clear) to 20.0 (depending upon the colour)
VOC: 869 +/- 106 grams per litre
Shelf Life (from date of manufacture): 1 Year
Touch Dry: 3 - 5 minutes @ 10 microns (dry film thickness)
Recommended Dry Film Thickness: 20 - 30 microns
Recommended Wet Film Thickness: 175 - 263 microns (Clear) to 98 - 147 microns (Colour)
UN Number: UN1263
Specific Gravity: 0.98 +/- 0.12 @ 20ºC
Viscosity: 11.0 – 17.0 seconds @ 20° C Ford Cup No. 4
Solids by Weight: 11.2 (Clear) to 20.0 (depending upon the colour)
Flashpoint: - 3ºC (Measured with Seta Closed Cup)
Oven Cure: 50 minutes @ 50°C
Post Cure: 24 hours @ ambient temperature (16°C)
Flash Time (Between Coats): 10 - 15 minutes @ ambient temperature (16° C)
Base Type: Solvent-Based
Suitable For Use On: Rubber
Finish: Satin (30%)
Application Method: Spray
Application Method: Hand
Manufacturer: Kolorbond
Components: 1K
Usages: Marine Applications
Product Usage Type: Topcoat
Colour Family: Anthracite Grey
Colour Family: Chartwell Green
Colour Family: Beige
Colour Family: Grey
Colour Family: Green
Colour Family: Blue
Colour Family: Red
Colour Family: Brown
Colour Family: Pink
Colour Family: Orange
Colour Family: Purple
Colour Family: Yellow
Colour Family: Black
Colour Family: White
Colour Family: Neutral
Colour Family: Metallic
Seasonal: Cold Weather
Seasonal: Warm Weather

Attachments

Download

Product Data Sheet

Download

Safety Data Sheet

Download

Application Instructions

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

Name ^*

Email ^*

Question ^*

^* Required fields

I have read and agree to the conditions of use (read)

Be the first to ask a question about this product!

IMPORTANT SHIPPING & DELIVERY INFORMATION

Kolorbond Hypakolor is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT