Rust-Oleum Epoxyshield Concrete Repair Mortar - Powdered Repair Mortar

EpoxyShield Concrete Repair Mortar is a high-quality, single-component, powdered repair product designed for levelling and repairing cracks, holes, and other damages in concrete surfaces. Its versatile formulation is suitable for both indoor and outdoor applications, making it an ideal choice for a wide range of repair projects.

Application Areas

• Concrete surfaces.
• Cement renderings.
• Unpainted brickwork.

Why Choose EpoxyShield Concrete Repair Mortar?

Choosing EpoxyShield ensures you are using a product designed for efficiency and durability. This repair mortar provides a smooth finish that is sandable, making it easier to achieve a seamless repair. Its quick recoating time of 48 hours means projects can proceed without lengthy delays.

Application Instructions

• Ensure the substrate is clean, solid, and free from dust, oil, and grease.
• Mix the powder with water in a ratio of approximately 5 parts powder to 1 part water.
• Apply the mixture with a trowel or spatula, smoothing out any irregularities with a wet trowel.
• Allow the mortar to cure for 48 hours before sanding or recoating.

Usage Restrictions

Do not apply EpoxyShield Concrete Repair Mortar on painted surfaces or use it in applications where the layer thickness exceeds 2 cm without adding kiln-dried quartz sand. Always refer to the downloadable data sheet for more detailed application instructions and safety information.

Health and Safety

EpoxyShield Concrete Repair Mortar is classified as hazardous according to Regulation (EC) No. 1272/2008. It causes skin irritation and serious eye damage and may cause an allergic skin reaction and respiratory irritation. Always wear protective gloves and eye/face protection. If in eyes, rinse cautiously with water for several minutes and seek medical attention immediately. Dispose of contents and container in accordance with local, regional, national, and international regulations. Contains no Diisocyanates.