Coo-Var Clear Glaze for Wooden Floors

This clear, water-based glaze is designed to protect wooden and concrete floors by forming a durable, off-gloss finish. Its quick-drying formula makes it ideal for locations where fast turnaround times are needed, such as commercial properties or residential spaces. The absence of solvent odours enhances its usability in indoor settings.

Key Features

• Ready-to-use product.
• Dries quickly, allowing multiple coats to be applied within a day.
• Easy cleanup with water, reducing the need for harsh chemicals.
• Slip resistance independently tested (54 dry, 33 wet) for both wooden and concrete floors.
• Safe for use indoors due to its low odour and non-flammable nature.
• Provides a clear, protective finish, suitable for both domestic and commercial applications.

Application Guidelines

This product should be applied using a brush or roller in conditions above 7°C. Before application, ensure all surfaces are clean, dry, and free from contaminants. Wooden floors should be sanded to provide a key, and existing coatings should be cleaned and lightly sanded.

For optimal results, apply multiple coats with a 6-hour recoat interval. Avoid using the product in high humidity or low temperatures, as this can delay drying and affect performance. It is essential to avoid use on substrates where the temperature may drop below 7°C during application or drying.

Restrictions and Recommendations

Do not use this product on surfaces exposed to extreme conditions, such as those exposed to water submersion or excessive moisture. It should also not be applied in temperatures below 7°C, as this can affect its performance. For substrates not mentioned in this guide, consider using alternative recommended products for best results.

Always consult the downloadable technical data sheet and safety data sheet for more detailed application instructions and to verify suitability for specific use cases.

Health and Safety

This product contains trace amounts of sensitising agents such as 1,2-Benzisothiazol-3(2H)-one, which may cause allergic reactions in some individuals. Use protective gloves and ensure adequate ventilation during application. Refer to the MSDS for complete health and safety guidelines.