- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
A washable, decorative and highly effective fungicidal anti-mould paint for internal walls and ceilings.
- Suitable for walls, ceilings, woodwork, bathrooms, shower rooms, kitchens, bedrooms, living areas.
- Ideal for use by Landlords who can face an on-going battle with properties and the infestation of mould which is both unsightly and a health hazard to their Tenants.
- National Residential Landlords Association (NRLA) approved.
- Click here to view the Step By Step guide.
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Product customisation
Don't forget to save your customization to be able to add to cartGlixtone Fungi-Shield Anti-Mould & Black Spot Paint is a washable, decorative and highly effective fungicidal, anti-mould, matt finish paint for areas susceptible to mould and bacterial growth. It is suitable for use on any internal walls and ceilings.
Glixtone is affiliated with the National Residential Landlords Association (NRLA) as a Recognised Supplier.
Landlords face an on-going battle with properties and the infestation of mould which is both unsightly and a health hazard to their Tenants. Re-decoration is expensive, time consuming and disruptive. If Health Inspectors are notified this can also be a real problem to Landlords.
Glixtone Fungi-Shield will not stop condensation or damp, however, when applied it is impossible for mould spores to survive on its surface as the active biocide is distributed evenly over the entire paint film and will continue to kill spores on contact. Glixtone Fungi-Shield offers a long lasting solution to what can be a never ending battle.
Available in White and 1,600+ RAL, BS and NCS colours.
Click Here to view the Step By Step guide for this product.
Quick Links - Click To Jump To Section:
Features & Benefits
- Water Based and Environmentally Friendly
- No Solvents and silicone free
- Non-toxic and odour free when dry
- Available in White and 1,600+ RAL, BS and NCS colours
- Non caustic and non-injurious to the skin
- Suitable for Walls, Ceilings, Woodwork, Bathrooms, Shower Rooms, Kitchens, Bedrooms, Living Areas
- Long-lasting solution - Mould will not grow for the life of the paint film
- Good coverage - 11-13m² per litre, per coat, depending upon type of surface (2 coats required)
- Ideal for use by Landlords who can face an on-going battle with properties and the infestation of mould which is both unsightly and a health hazard to their Tenants
- Approved by the National Residential Landlords Association (NRLA)
- For detailed information please see the Product Data Sheet and Information Sheet
Why Does Glixtone Fungi-Shield Work?
Other Fungicidal/Anti-Mould paints use an additive which is mixed into an already made Emulsion Paint. This means that not all of the paint will carry the same amount of the Fungicide which protects against Mould growth.
Glixtone use an Acrylic Resin and their own Fungicide and an Algaecide which forms a thermal barrier to areas subject to varying temperatures and condensation, e.g. kitchens, bathrooms, shower rooms, bedrooms even Living Rooms etc.
All of the constituents of the paint are added in a formulated process and dispersed to ensure that all the pigments and constituents including UV stabilisers, algaecides, and fungicides are coated evenly in the paint blend to produce a paint that is consistent, stable and which will promote all of its anti-fungal properties.
The paint is tested and fine-tuned to ensure that its application properties are fully utilised.
This means that the active anti-fungal biocidal components are evenly bonded to the active constituent of the paint to ensure that it is evenly distributed when coated out to prevent mould infestation.
This ensures that every part of Glixtone Fungi-Shield carries the same amount of the active biocide and when applied every part of the surface will be protected.
Do I Need A Stain Block?
A stain block is only required if there is any other staining apart from Blackspot/Mould on the surface to be painted, such as water damage etc.
Limitations
- Not recommended for use in extremely humid conditions or where frequent scrubbing occurs
- Please Note: If Glixtone Fungi-Shield coatings are over-painted with anything other than Glixtone Fungi-Shield products, the fungicidal properties will be lost
- Please refer to the Safety Data Sheet before use
Data sheet
- Manufacturer
- Glixtone
- For Use By
- Consumer Use
- Interior / Exterior Use
- Interior Use
- Water / Solvent Based
- Water
- Application Method
- Brush, Roller, Spray
- Sheen
- Matt
- Colour
- Fully Tintable
- VOC Levels
- Ultra-Low (5-49 g/l)
- Single, Two or Three Pack
- Single
- Pack Size
- 1L, 2.5L, 5L
- Key Features
- Anti-Mould, Fungicidal, Washable
- Coverage
- 11-13m² per litre, per coat, depending upon type of surface (2 coats required)
- Recommended Thinner/Cleaner
- Water
- Shelf Life (from date of manufacture)
- 12 Months
- Recommended Dry Film Thickness
- 30 microns
- Recommended Wet Film Thickness
- 65 microns
- UN Number
- N/A
- Drying time
- 4 hours in dry, well-ventilated conditions
- Base Type
- Water-Based
- Suitable For Use On
- Kitchen Ceilings
- Suitable For Use On
- Bathroom Ceilings
- Suitable For Use On
- Bathroom Walls
- Suitable For Use On
- Shower Rooms
- Suitable For Use On
- Wood
- Suitable For Use On
- Shower Room Walls
- Suitable For Use On
- Walls
- Suitable For Use On
- Shower Room Ceilings
- Suitable For Use On
- Kitchens
- Suitable For Use On
- Bedroom Walls
- Suitable For Use On
- Bathrooms
- Suitable For Use On
- Bedrooms
- Suitable For Use On
- Ceilings
- Suitable For Use On
- Rental Properties
- Suitable For Use On
- Kitchen Walls
- Suitable For Use On
- Changing Room Walls
- Suitable For Use On
- Wood Walls
- Suitable For Use On
- Rental Property Walls
- Suitable For Use On
- Woodwork
- Suitable For Use On
- Shower Ceilings
- Suitable For Use On
- Showers
- Suitable For Use On
- Bedroom Ceilings
- Suitable For Use On
- Changing Rooms
- Suitable For Use On
- Changing Room Ceilings
- Suitable For Use On
- Shower Walls
- Suitable For Use On
- Rental Property Ceilings
- Suitable For Use On
- Wood Ceilings
- Suitable For Use On
- Wooden Ceilings
- Finish
- Matt
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Product Usage Type
- Topcoat
- Product Range
- Fungi-Shield
- Fastest Delivery
- Next Working Day
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Off-White
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Violet
- Colour Family
- Cream
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Categorised As
- Anti-Mould Paints
- Product Focus
- Mould & Damp Proof Paints
- Seasonal
- Cold Weather
Questions
Question about the product
Matt on 2024-08-18 17:39:58 | Question:
Can this be used in a cellar? |
Answer from Rawlins’ Technical Team:
Assuming the cellar is tanked to ensure it is sealed against damp, this product could be used in dry cellar environments. It is designed for application in normal habitation environments. If areas of damp persist, you could consider Coo-Var Anti-Damp Paint as an alternative, this can be applied to slightly damp surfaces and allows for over-coating with a decorative finish if required. | |
Rob on 2024-06-12 07:11:27 | Question:
Regarding your fungi guard shield paint, can this be painted directly over a lightly moldy wall, or do I need to remove all traces of the mold prior to painting? Thanks. |
Answer from Rawlins’ Technical Team:
No, this product is recommended for application to areas that are clean, dry, sound and prepared as detailed in the technical prior to application, with black spots/mould to be scraped away or brushed off with a stiff fibre brush, leaving as clean a surface as possible prior to painting. To ensure the risk is lower for mould and fungi returning, you could apply Glixtone Fungi-Shield Concentrated Sterilising Solution firstly to the existing surface by brush or cloth/sponge, and allow to dry for a full 24 hours, before painting with 2 coats of Glixtone Fungi-Shield Anti-Mould & Black Spot Paint for full protection. | |
paul on 2023-12-08 19:49:27 | Question:
will this stop condensation on my walls if i paint it over the emulsion that is already on the wall |
Answer from Rawlins’ Technical Team:
Not completely. Assuming the walls are suitably prepared as detailed in the technical datasheet, although it won't stop condensation or damp, this product can be applied to areas susceptible to mould and bacteria growth, meaning it is impossible for mould spores to survive on the surface, as the active biocide is distributed evenly over the entire paint film and will continue to kill spores on contact. An alternative to reduce condensation on treated surfaces could be N-Virol Suretherm Goodbye Mould Thermal Anti Condensation Paint. It is ideal for use on cold walls and ceilings that maybe prone to condensation, mould and heat loss, forming a thermal barrier on cold walls, and can even be overpainted or wallpapered over without affecting the performance. | |
Ness on 2023-11-26 11:12:33 | Question:
Can this be used on an internal plasterboard wall that keeps getting efflorescence? I have tried putting mould proof paint on before and stain blocker, but where the efflorescence happens, it peels off. I've also tried spraying the bare wall with mould remover, white vinegar but it keeps coming back. Any suggestions would be helpful within your product range if this is not the right one to go for. |
Answer from Rawlins’ Technical Team:
This product wouldn't be suitable to prevent efflorescence occuring without eradicating the problem firstly. Assuming the wall is clean, dry, sound and free of all surface contaminations, we'd recommend treating the surface with N-Virol Salt Neutraliser firstly, which helps neutralise the salts to prevent or reduce efflorescence, before washing with clean, fresh water and allowing to dry prior to re-decorating | |
Judi on 2023-10-11 15:09:07 | Question:
Is Glixtone suitable to paint over tiles? |
Answer from Rawlins’ Technical Team:
No, this product isn't suitable for application to tiles such as ceramic bathroom or kitchen tiles. This wouldn't provide the durability or finish required as the product is intended for use on standard wall or ceiling coverings as a vinyl washable emulsion paint. Assuming the tiles are prepared in accordance with the techncial data sheet, you could consider Rust-Oleum Tile Transformation Kit as this product requires no removal of the existing tiles or priming prior to application. This is designed for use in kitchens, bathrooms and is suitable for areas subject to direct water contact. | |
Wendy on 2023-08-06 06:45:47 | Question:
Can you paint over or wallpaper over this product as I have mould on walls |
Answer from Rawlins’ Technical Team:
While this product can be overpainted or wallpapered, it will no longer provide any anti-mould protection. It should be left as the final coat. | |
Darren on 2023-05-13 13:57:35 | Question:
After applying this paint, is it ok to paint over it with different colour paint so it’s same as the rest of the room? |
Answer from Rawlins’ Technical Team:
You would lose the anti-mould protection of the paint if you were to over paint this product. It can be mixed to many RAL, NCS or BS Colours, we would recommend viewing a physical colour chart to ascertain a suitable match to the rest of the room. Alternatively you could use our Colour Match Service | |
Adina on 2023-03-30 13:28:20 | Question:
Is this suitable for metal frame on windows? |
Answer from Rawlins’ Technical Team:
Yes it can be used on metal surfaces as long as they are pre painted and that it is good and solid. Or pre prime with a good metal primer. It will prevent mould growth on the frame but not on any rubber trim/seals. But it will not stop condensation build up and wet window ledges. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Glixtone Fungi-Shield Anti-Mould & Black Spot Paint is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
General Painting Application Kit
Provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects, including uPVC surfaces, walls, ceilings, and more. Click to jump down to...
Glixtone Fungi-Shield Concentrated Sterilising Solution
Approved by the National Residential Landlords Association (NRLA), destroys mould or fungi, sterilising prepared surfaces prior to the application of Glixtone Fungi-Shield Paint. Ideal for any internal areas that are susceptible to mould or organic growth including: walls, ceilings, woodwork, bathrooms, shower rooms, kitchens, bedrooms and...
Glixtone Fungi-Shield Anti-Mould Paint Kits
Contains everything you need to provide a washable, decorative fungicidal, anti-mould, paint finish to areas susceptible to mould and bacterial growth. Suitable for walls, ceilings, woodwork, bathrooms, shower rooms, kitchens, bedrooms, living areas. Internal use only on any above ground surface to eliminate mould, algae and fungus....