- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- Available in matt grey.
- Super adhesion primer for cladding and new or aged PVDF/PVF2 surfaces.
- For galvanised steel, zinc, aluminium, and hard plastics.
- Tack-free in 30 minutes.
- Ideal under Mathys Metal Cladding Topcoat.
- Professional use only.
Rust-Oleum PVDF Primer - Exceptional Adhesive Primer for Cladding
Rust-Oleum PVDF Primer is a high-performance, single-pack primer designed specifically for PVDF or PVF2 cladding. Its unique formulation ensures excellent adhesion on various surfaces, making it an indispensable product for industrial and professional applications.
Key Benefits
- Superior Adhesion: Offers outstanding bonding on new and aged PVDF/PVF2 cladding, as well as on galvanised steel, zinc, aluminium, and hard plastics.
- Quick Drying: Becomes tack-free in just 30 minutes, allowing for efficient workflow and reduced downtime.
- Durability: Provides a robust base layer that enhances the longevity and performance of topcoats.
Application Versatility
This primer is ideal for a range of surfaces:
- PVDF/PVF2 cladding
- Galvanised steel
- Zinc
- Aluminium
- Hard plastics
It is particularly recommended for use under Mathys Metal Cladding Topcoat, ensuring superior protection and aesthetic appeal.
Application Instructions
For best results, ensure surfaces are clean, dry, and free from grease or contaminants. Apply the primer using a brush, roller, or airless spray, without dilution. For air-atomised spray, a slight dilution with Thinner 22 is permissible.
Safety and Compliance
This product is restricted to professional and industrial use due to its chemical composition. Always refer to the downloadable data sheet for detailed safety and application guidelines. Not suitable for consumer use.
Health and Safety
UN Number: 1263
Hazard Statements: Flammable liquid and vapour, may cause respiratory irritation, drowsiness, and dizziness, toxic to aquatic life with long-lasting effects.
Safety Precautions: Avoid inhalation and skin contact, use in well-ventilated areas, keep away from heat and open flames.
Contains: Aromatic hydrocarbons, trizinc bis(orthophosphate), and xylene.
For more information, always refer to the downloadable data sheet. Ensure to store the product in a dry, well-ventilated area, away from direct sunlight and sources of ignition.
Data sheet
- Manufacturer
- Rust-Oleum
- For Use By
- Professional Use
- Interior / Exterior Use
- Exterior Use
- For Use On
- Galvanized Steel
Zinc
Aluminium
PVDF
PVF2 - Application Method
- Brush
Roller
Spray - Sheen
- Matt
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Single
- Dry to Handle (at 20°C)
- 1.30 Hours
- Dry to Recoat (at 20°C)
- 24 Hours
- Fully Cured (at 20°C)
- 1 Week
- Coverage
- 10m² per litre
- Density
- 1.17g/cm³
- Solids by Volume
- 30 %
- VOC
- 570 g/L
- Shelf Life (from date of manufacture)
- 5 years
- Touch Dry
- 30 mins
- UN Number
- UN1263
- Base Type
- Solvent-Based
- Suitable For Use On
- PVDF/PVF2
- Suitable For Use On
- Zinc
- Suitable For Use On
- Aluminium
- Suitable For Use On
- Galvanised Steel
- Suitable For Use On
- Hard Plastics
- Finish
- Matt
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Product Usage Type
- Primer
- Fastest Delivery
- Next Working Day
- Colour Family
- Grey
- Categorised As
- Cladding Primers
Questions
Question about the product
Gus Flowers on 2018-03-12 10:56:37 | Question:
Good morning. I am intending to coat my garage roof with Noxyde Peganox. The roof is made out of good quality used Box Profile sheets that are a variety of different shades (mostly only spray finish including 1 or 2 Plasticol Coated) and within 2 miles of the coast. My question is: If using Peganox, do I also need to use an undercoat on these sheets, particularly the Plasticol finish ones? Kind regards. Gus Flowers |
Answer from Rawlins’ Technical Team:
Assuming the roof is pitched and surfaces are aged, weathered (2+ years) then we would recommend the application of Rust-Oleum Mathys Noxyde Pegarust directly to the sheets in two coats. Rust-Oleum Mathys Noxyde Pegarust is a primer and topcoat in one and can be applied directly on various metallic substrates including weathered/aged iron, galvanised steel, plastisol, aluminium and zinc. Rust-Oleum Mathys Noxyde Peganox should not be used on roofs and Rust-Oleum PVDF Primer would not be needed in this instance presuming your surfaces are one of the above mentioned and are weathered/aged. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Rust-Oleum PVDF Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Mathys Fassilux Satin
We no longer stock this product, but can recommend Zinsser AllCoat Exterior Satin (Solvent Based) as a great alternative. Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our...
Rust-Oleum Mathys 108 Surfa Etch Solution
High performance etching solution. For use on smooth concrete, masonry, galvanised steel, and aluminium. Improves adhesion of coatings. Neutralises alkaline salts. Removes 'white rust' from metal. Non-flammable. Professional use only.
Rust-Oleum Thinner 22
We no longer stock this product, but can recommend Rust-Oleum Thinner 633 as a great alternative. Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450...
Rust-Oleum Mathys Noxyde
We no longer stock this product, but have Rust-Oleum Mathys Noxyde - 5KG colours in clearance, for immediate dispatch!
Rust-Oleum Mathys Metal Cladding Topcoat
Available in 4,100+ colours. Water-based satin gloss topcoat for metal cladding surfaces. Also for aged Plastisol in good condition. High filling and hiding power. Easy to clean and maintain. Professional use only.
General Painting Application Kit
Provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects, including uPVC surfaces, walls, ceilings, and more. Click to jump down to...