- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total (inc. VAT) £0.00
Fosroc Nitoseal MS600 is a one part, engineering sealant for immersed conditions based on hybrid silyl modified polyether technology.
Suitable for use for sealing movement joints in buildings and civil engineering structures including joints that will be subject to intermittent or permanent immersion.
Typical applications include - Potable water tanks, Reservoirs, Sewage tanks, Sea walls*, Basements, Subways, Parapets, Bridges and Superstructures.
*See 'Limitations' Section
Please note: Colours shown are for illustrative purposes only
Description
Quick Links - Click To Jump To Section:
Features & Benefits
- It has a fast rate of cure and forms a tough, highly durable and water resistant elastomer
- Recommended for use in contact with potable water
- Meets key international standards
- Resistant to aerobic and anaerobic bacteriological attack
- Exhibits excellent water resistance
- Excellent resistance to dilute acids and alkalis
- Cures to a tough, elastic rubber seal
- Accommodates continuous and pronounced cyclic movement
- High resistance to ageing, reduces physical damage due to climatic extremes
- Single component yet fast rate of cure
- Easy to apply at low temperatures
- Can be applied to damp substrates
- Isocyanate free technology
- Complies to EN 14188:2:2004: Joint sealants for concrete pavements - cold applied
- Conforms to the Water Supply (water quality) Regulations 2000 and 2001 Regulations 31(4b) for products having a small surface area in contact with water for public supply
- Please refer to the Product Data Sheet for full details of:
- Standards Compliance
- Design Criteria
- Properties
- Surface Preparation
- Priming
- Application Instructions
- Finishing
- Estimating
- Curing
- Cleaning
- Storage
- Health and Safety
Application Notes
- Nitoseal MS600 should be applied to joints between 5 and 35mm wide
- A primer is not normally required. In joints subjected to high movement or where intermittently immersed during service Fosroc Primer MS2 is recommended
- Joints which are expected to experience cyclic movements should be designed to an optimum width : depth ratio of 2:1, subject to the overriding recommended minimum sealant depths set out below: 5mm for metals, glass and other non-porous surfaces; 8mm for all porous surfaces; 20mm for joints subject to hydrostatic pressure
- Fosroc Primer MS2 is required for all joints
Please see the Product Data Sheet for detailed information.
Limitations
- Should not be applied at temperatures below 5°C
- Not suitable for contact with bituminous materials
- Not suitable for contact with solvents, oil or petrol
- Whilst Nitoseal MS600 has excellent adhesion to many types of residual sealant, its use should not be considered a substitute for a good standard of joint preparation
- Nitoseal MS600 must be allowed to cure for 7 days before sea water or sewage immersion. Tidal sea and river wall joints can be sealed provided this condition is met
Product Details
7340-905154
Data sheet
- Manufacturer
- Fosroc
- For Use By
- Professional Use
- Single, Two or Three Pack
- Single
- Application
- Sealant Gun
- Coverage
- Please see Product Data Sheet as coverage is dependent on joint size and depth
- Touch Dry
- 2-3 hours
- UN Number
- N/A
- Fully Cured
- 21 days at 7°C or above
- Colour(s)
- Standard Colours
- Suitable For Use On
- Concrete
- Suitable For Use On
- Concrete Floors
- Application Method
- Sealant Gun
- Manufacturer
- Fosroc
- Usages
- Water Industry Sealants
- Product Usage Type
- Sealer
- Product Range
- Nitoseal
- Colour Family
- Grey
Questions
Question about the product
 Donald on 2023-05-25 21:23:07 | Question: Hello there, We have a project drawing specifying Fosroc Thioflex 600 mastic. Can you confirm what typ of gun we need for applying this? Thank you |
Answer from Rawlins’ Technical Team: This product can be applied with a Fosroc GX 600ml Sealant Gun. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Fosroc Nitoseal MS600 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
Fosroc Expandafoam
Fosroc Expandafoam is a flexible, readily compressible, closed-cell polyethylene joint filler supplied in sheet form and as rectangular strips or circular section cords. Suitable for use as an expansion joint filler in brick and blockwork, isolation joints and hinge joints where a readily compressible low load transfer joint filler is...
Price£62.05 (incl. VAT)
In Stock and Available for Delivery
Fosroc Nitoseal MS2 Primer
Fosroc Nitoseal MS2 Primer is a two-pack primer for use in joints subjected to high movement or where joints will be intermittently or permanently immersed during service. Suitable for use before the application of products in the Fosroc Nitoseal range including Fosroc Nitoseal MS300, Fosroc Nitoseal MS600, Fosroc Nitoseal MS60 and Fosroc...
Price£124.03 (incl. VAT)
In Stock and Available for Delivery