I need to paint the metal ends of a garden bench, which will have been shotblasted and primed. If I need to repaint this in the future, would it need to be stripped back to bare metal?

If you need to re-paint it at a later date, assuming the previously applied paint is clean, dry, sound and sanded to provide a surface key, you could consider this product. Providing there are no bare areas and the existing coating is sound on application, you can re-apply this paint without priming.

Can I paint on exterior glass with this? I'm stencilling a door number on a glass panel above the front door. If not, what would you recommend?

Assuming the glass is clean, dry, sound and prepared as detailed in the technical datasheet, you could consider this product. For optimal adhesion and corrosion control, Maston Spraypaint 2K Primer could be applied as a first coat prior to application, ensuring a smoother and more durable finish will be achieved, however the Primer is Grey and therefore will be visible on the other side of the glass.

Would this paint be suitable for the internal wall hollow of a fireplace? With a freestanding gas fire inside. Thank you

No, this product isn't intended for this type of application. Assuming the firewall is made of brick, concrete or lime/lime cement, it is bare, clean, dry, sound and prepared in accordance with the technical data sheet, you could consider Tikkurila Muuri as an alternative. Dependent on the colour you select, the heat resistance will vary, Ready Mixed White will offer heat resistance up to 300℃, and tinted colour options up to 180℃.

I need to paint a bicycle, can I just sand it slightly and use this paint without stop completely the old paint and not using a primer? Is this self priming?

Assuming the existing coating is clean, dry, sound and abraded prior to application, you could consider this product direct over an existing coating. We would recommend applying to a small test area firstly to test compatibility and adhesion, prior to full application.

Maston Spraypaint 2K Colours | 2 Component Spray Paint in 1 Can

Maston Spraypaint 2K Colours

Reference 300024G

Brand Maston

Search ID MAS8691

2-component epoxy aerosol; durable spray paint in 2,200+ colours.
Adheres to metal, aluminium, galvanised steel, wood, plastic, glass, ceramics, chrome, stone, and copper.
Certified for chemical, water, and corrosion resistance.
No mixing required; unlimited shelf life thanks to dual compartment system with deactivated hardener.
For professional and industrial applications only.

Product customisation

Don't forget to save your customization to be able to add to cart

Colour Group

Size

Finish

£13.38(incl. VAT)

£11.15(ex. VAT)

Quantity

Please choose your colour

In Stock and Available for Delivery (See Delivery Options Below)

ColourPicker Explained

In general we sort colours for products into 2 main groups - ‘Ready Mixed’ and ‘Tinted’.
Tinted colours will always be more expensive than Ready Mixed colours as they need to be produced at the time of order using a tinting machine dispensing colourant into a base*.
During busy periods, this means that tinted colours could take longer, for example – a ready mixed colour ordered on a 3-5 day delivery might arrive within 3 days, however a tinted colour might take the full 5 days to arrive.

To find Ready Mixed colours, search "ready mixed" or select the Ready Mixed 'colour chart'. To see Tinted colours select a colour chart such as RAL, BS, NCS, etc. or search for a colour/hue to see available or related options.

To ensure fair pricing, we split colours into ‘Price Bands’ to group together similar priced colours. If you wish to search for the cheapest tinted colours, always select Price Band 1.

We make every effort to list all available colours, however we also offer a colour match service which can be accessed by contacting our Technical Team on 0113 245 5450 (option 2) or emailing [email protected]

*Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour

Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes.

4 questions about the product

Description

Maston Spraypaint 2K Colours - Advanced 2-Component Epoxy Aerosol Technology

Maston 2K Prefill uses WISE 2K® patented technology to offer a true two-component epoxy spray solution within a single compartment can. Unlike conventional 2-pack systems that demand immediate use after activation, this product eliminates waste through unlimited pot life, only activating once sprayed. It simplifies colour customisation with 2,200 colours, while ensuring a durable finish.

Exceptional Compatibility with a Wide Range of Surfaces

Designed for versatility, this product adheres strongly to difficult substrates without additional primers. These include:

Metal and galvanised steel
Aluminium and chrome
Wood, ceramics, and stone
Glass and most plastics

Its formulation forms a tight, water-and air-resistant coating that is also chemically robust.

Durability and Resistance for Demanding Applications

Once applied, the cured paint layer demonstrates:

High chemical and water resistance (8–10 days full cure)
Superior corrosion and abrasion resistance
Excellent adhesion and anti-rust properties

The finish remains flexible yet hard-wearing, with gloss options ranging from matt (0–25 GU), satin (35–50 GU), to gloss (80–100 GU).

Ease of Use with No On-Site Mixing

The self-contained aerosol delivers ready-to-use 2K epoxy technology:

No hardener activation needed - shake and spray
Quick touch-dry in 12 hours at +20°C
Recoatable within 3–5 hours
Coverage of up to 3m² on a primed surface (400ml)

This is ideal for professional users looking to save time while ensuring quality.

Recommended Uses and Compatible Products

This product is recommended for:

Protective coatings on architectural, automotive, and industrial substrates

Always refer to the downloadable data sheet for full product details, drying schedules, and surface preparation guidelines.

Important Restrictions and Limitations

Do not apply over damp or wet surfaces, and do not use in high humidity below 20°C or above 75% RH. This product is strictly for professional and industrial use. Not suitable for direct application to oily substrates unless properly degreased. Avoid use on unprimed or untreated flexible plastics.

Refer to the technical data sheet before use to ensure surface compatibility and optimal performance.

Health and Safety

UN Number: 1950

This product contains substances that may cause skin and eye irritation. Ensure proper ventilation when applying and avoid inhaling the spray mist. If the product comes into contact with skin or eyes, wash immediately with plenty of water and seek medical advice if necessary.

Product Details

Reference 8691-970535

Data sheet

Manufacturer: Maston
For Use By: Consumer Use
Interior / Exterior Use: Interior & Exterior
For Use On: Metal, aluminum, galvanized metal, copper, chrome, wood, stone, ceramics, glass and most plastics
Application Method: Aerosol
Sheen: Matt/Semi-Gloss/High Gloss
Single, Two or Three Pack: Single
Pack Size: 400ml
Touch Dry (at 20°C): 3 - 5 hours
Coverage: 2.5m²
Shelf Life (from date of manufacture): 3 months
UN Number: UN1950
Resistance to water: 12 hours
Resistance to chemicals: 8 -10 days
Flammability: Flammable aerosol
Colour(s): Fully Tintable
Base Type: Solvent-Based Epoxy
Suitable For Use On: Wood
Suitable For Use On: Glass
Suitable For Use On: Ceramics
Suitable For Use On: Metal
Suitable For Use On: Plastic
Suitable For Use On: Stone
Finish: Matt
Finish: Semi-Gloss
Finish: High Sheen Gloss
Application Method: Aerosol
Product Usage Type: Topcoat
Product Range: 2K
Fastest Delivery: Next Working Day
Colour Family: Red
Colour Family: Brown
Colour Family: Pink
Colour Family: Orange
Colour Family: Purple
Colour Family: Yellow
Colour Family: Off-White
Colour Family: Black
Colour Family: White
Colour Family: Neutral
Colour Family: Anthracite Grey
Colour Family: Violet
Colour Family: Cream
Colour Family: Beige
Colour Family: Grey
Colour Family: Green
Colour Family: Blue

Attachments

Download

Maston 2K Brochure

Download

Product Data Sheet

Download

Safety Data Sheet (Matt, Semi-Gloss)

Download

Safety Data Sheet (High Gloss)

Download

Safety Data Sheet (RAL 9010, RAL 9005)

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

Name ^*

Email ^*

Question ^*

^* Required fields

I have read and agree to the conditions of use (read)

Iain Millar on 2025-04-28 11:52:16	Question: I need to paint the metal ends of a garden bench, which will have been shotblasted and primed. If I need to repaint this in the future, would it need to be stripped back to bare metal?
	Answer from Rawlins’ Technical Team: If you need to re-paint it at a later date, assuming the previously applied paint is clean, dry, sound and sanded to provide a surface key, you could consider this product. Providing there are no bare areas and the existing coating is sound on application, you can re-apply this paint without priming.

Sunny on 2025-04-23 08:40:21	Question: Can I paint on exterior glass with this? I'm stencilling a door number on a glass panel above the front door. If not, what would you recommend?
	Answer from Rawlins’ Technical Team: Assuming the glass is clean, dry, sound and prepared as detailed in the technical datasheet, you could consider this product. For optimal adhesion and corrosion control, Maston Spraypaint 2K Primer could be applied as a first coat prior to application, ensuring a smoother and more durable finish will be achieved, however the Primer is Grey and therefore will be visible on the other side of the glass.

Kate on 2025-04-13 18:57:24	Question: Would this paint be suitable for the internal wall hollow of a fireplace? With a freestanding gas fire inside. Thank you
	Answer from Rawlins’ Technical Team: No, this product isn't intended for this type of application. Assuming the firewall is made of brick, concrete or lime/lime cement, it is bare, clean, dry, sound and prepared in accordance with the technical data sheet, you could consider Tikkurila Muuri as an alternative. Dependent on the colour you select, the heat resistance will vary, Ready Mixed White will offer heat resistance up to 300℃, and tinted colour options up to 180℃.

Nick on 2025-02-24 07:32:13	Question: I need to paint a bicycle, can I just sand it slightly and use this paint without stop completely the old paint and not using a primer? Is this self priming?
	Answer from Rawlins’ Technical Team: Assuming the existing coating is clean, dry, sound and abraded prior to application, you could consider this product direct over an existing coating. We would recommend applying to a small test area firstly to test compatibility and adhesion, prior to full application.

IMPORTANT SHIPPING & DELIVERY INFORMATION

Maston Spraypaint 2K Colours is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT

Maston Spraypaint 2K Primer

Two-component grey epoxy anti-corrosive primer. For bare aluminium, steel, OEM finishes, old paintwork, and plastics. Resistant to chemicals and heat up to 150°C. Superior adhesion, easy application.

£13.38 (incl. VAT)

Shop now

In Stock and Available for Delivery

Maston Spraypaint 2K PU Clear Coat | Spray On Glossy Clear Coat

Maston 2K PU Clear Coat

Two-component polyurethane clear coat. Durable gloss finish. Ideal for solvent-borne and waterborne basecoats. UV protective, petrol resistant. Interior or exterior use. Professional use only.

£15.04 (incl. VAT)

Shop now

In Stock and Available for Delivery

Follow us on:

Maston Spraypaint 2K Colours

Maston Spraypaint 2K Colours

Product customisation

Your customization: Chosen Colour: RAL 9010 - Ready Mixed Pure White (#EFEFE6)

Maston Spraypaint 2K Colours - Advanced 2-Component Epoxy Aerosol Technology

Exceptional Compatibility with a Wide Range of Surfaces

Durability and Resistance for Demanding Applications

Ease of Use with No On-Site Mixing

Recommended Uses and Compatible Products

Important Restrictions and Limitations

Health and Safety

Data sheet

Maston 2K Brochure

Product Data Sheet

Questions

Question about the product

IMPORTANT SHIPPING & DELIVERY INFORMATION

Maston Spraypaint 2K Primer

Maston 2K PU Clear Coat