- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- 2,400+ Gloss Colours.
- Two-pack aliphatic polyurethane coating designed for marine applications.
- For GRP, wood, ferro concrete, and suitably primed metals; not to be used on conventional solvent-based paints.
- Resistant to fading or yellowing from UV exposure.
- Anti-fungal properties.
- Professional use only.
Product customisation
Don't forget to save your customization to be able to add to cartProfessional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Teamac High Performance Polyurethane Topcoat
This high-performance marine coating is engineered to provide exceptional durability and gloss retention, even under the most challenging marine conditions. It is formulated with aliphatic polyurethane, ensuring that the coating remains light stable and does not yellow or fade, even when exposed to intense ultraviolet light. Available in a variety of colours, this coating is ideal for a range of marine applications, including use on GRP, wood, ferro concrete, and primed metal surfaces.
Application Areas
This product is specifically designed for use on surfaces that require long-lasting protection and a high-gloss finish in marine environments. It is suitable for application on GRP, wood, ferro concrete, and metals that have been properly primed. It is essential to avoid using this product on conventional solvent-based paints, as this can compromise the integrity of the coating. Additionally, it should not be applied over water-based paints that are not compatible with polyurethane coatings.
Application Guidelines
For optimal results, this coating should be applied between 5°C and 30°C using a brush or short nap mohair roller. Airless spraying is also an option but requires controlled conditions to ensure safety and effectiveness. The product is supplied as a two-component system, with the base and activator mixed together thoroughly before application. It is recommended to mix the components using a slow-speed electric mixer for at least two minutes to ensure a uniform mixture. The coating should be applied at a thickness of 60 microns DFT (Dry Film Thickness) to achieve the desired finish and durability.
Important Considerations
This product is intended for industrial use only and should be handled by professionals trained in its application. When spraying, it is crucial to operate in a well-ventilated area with appropriate protective equipment to avoid inhalation of any free isocyanates that may be emitted. Under no circumstances should this coating be used in environments where the temperature exceeds the recommended application range, as this can adversely affect the performance of the coating.
Additional Product Recommendations
For best results, it is advisable to use this coating in conjunction with Teamac HP Primer Undercoat, which provides an excellent base for the topcoat. If additional protection is required, particularly in highly corrosive environments, consider applying an additional layer of Teamac High Performance Marine Gloss.
Health and Safety
- UN Number: 1263
Contains substances that may cause allergic skin reactions and drowsiness or dizziness. Users must handle the product with care, avoiding any skin contact or inhalation of vapours. Always refer to the safety data sheet (SDS) for comprehensive information on safe handling practices.
Data sheet
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Concrete
Wood
GRP
Metal - Application Method
- Brush
Roller
Airless Spray - Single, Two or Three Pack
- Two-Pack
- Pack Size
- 1L, 5L
- Parts
- 2 Part pack
- Application
- Brush, Roller, Spray
- Dry to Handle (at 20°C)
- 16 - 24 Hours
- Fully Cured (at 20°C)
- 5 - 7 Days
- Pot Life (at 20°C)
- 6 to 8 Hours
- Coverage
- 8.5 m2/litre @ 60 microns D.F.T
- Solids by Volume
- 47%
- VOC
- Max 498 g/litre
- Touch Dry
- 3 - 4 Hours
- Size
- 1 litre and 5 litre mixed packs
- Recommended Dry Film Thickness
- 60 microns
- Recommended Wet Film Thickness
- 125 microns
- UN Number (Activator)
- UN1263
- UN Number (Base)
- UN1263
- Hard Dry
- 16 to 24 hours @ 20 °C
- Base Type
- Solvent-Based
- Suitable For Use On
- Concrete
- Suitable For Use On
- GRP Glass-Reinforced Plastic
- Suitable For Use On
- Metal
- Suitable For Use On
- Wood
- Suitable For Use On
- GRP
- Finish
- Gloss
- Application Method
- Spray
- Application Method
- Roller
- Application Method
- Airless Spray
- Application Method
- Brush
- Manufacturer
- Teamac
- Components
- 2K
- Usages
- Marine Applications
- Product Usage Type
- Topcoat
- Fastest Delivery
- Next Working Day
- Minimum Overcoating Time
- Minimum 16 hours
- Colour Family
- Pink
- Colour Family
- Cream
- Colour Family
- Purple
- Colour Family
- Grey
- Colour Family
- Black
- Colour Family
- Blue
- Colour Family
- White
- Colour Family
- Brown
- Colour Family
- Anthracite Grey
- Colour Family
- Orange
- Colour Family
- Beige
- Colour Family
- Yellow
- Colour Family
- Green
- Colour Family
- Clear
- Colour Family
- Red
Geoffrey Home on 2024-02-26 22:03:20 | Question:
We will not be using the entire 1 litre in one go. What is the mixing ratio please? |
Answer from Rawlins’ Technical Team:
It is not recommended to part mix this product, the manufacturer does not list the mixing ratio. | |
steve field on 2022-06-11 08:59:03 | Question:
Hi, would like to use your marine 2 part paint on my hull which has I assume standard marine enamel paint on it. Can this be primed and by what to enable me to use P101. |
Answer from Rawlins’ Technical Team:
We would not recommend application of this product over a single pack enamel paint, this should be removed prior to application and an appropriate primer maybe required. Please provide more infomration to [email protected] | |
Stuart on 2022-04-13 10:43:16 | Question:
Hi, I’m considering using this product to coat nylon fabric on a skin -on-frame kayak. Required to be abrasion resistant, UV resistant and flexible. Any past experience or comments? |
Answer from Rawlins’ Technical Team:
This product would not be suitable for this application unfortunately. | |
Richard Mortlock on 2018-11-25 15:29:05 | Question: Can this product be used to seal crazed gelcoat on a dinghy deck ? Will it penetrate and bind to the grp substrate ? Is a primer needed ? The cracks are not hairline but are not wide. They are too extensive to consider re gelcoating. Thank you. |
Answer from Rawlins’ Technical Team: Assuming the crazing is not deeper than 1mm, we have customers that have success with the following system. If crazing is deeper than 1mm then you would need to re-gelcoat. Thoroughly clean all surfaces and apply Teamac 2 Pack Zinc Phosphate Primer to the crazes and allow to dry overnight. Sand, then clean down and apply a further coat of Teamac 2 Pack Zinc Phosphate Primer, sand again once dry and then apply 2 coats to all areas of Teamac P101 High Performance Finish in the desired colour. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Teamac High Performance Polyurethane Topcoat is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Teamac 2 Pack Zinc Phosphate Primer
We no longer stock this product, but can recommend Teamac High Performance 2 Pack Zinc Phosphate Primer as a great alternative. Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our...
General Painting Application Kit
Provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects, including uPVC surfaces, walls, ceilings, and more. Click to jump down to...