- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Developed for use in applications to oil contaminated floors prior to application of subsequent floor toppings. The product exhibits outstanding adhesion to concrete and other substrates and is particularly suitable where compromised surfaces exist.
- Solvent free, low odour
- Excellent adhesion to concrete and steel
- Surface tolerant
- Excellent wetting properties
- Low viscosity, easily applied
- Pre-packaged units ready for use
- Images are for illustrative purposes only and may differ from the actual product
- This product is for Professional Use Only
403 Oil Tolerant Primer has been developed for use in applications to oil contaminated floors prior to application of subsequent floor toppings. The product exhibits outstanding adhesion to concrete and other substrates and is particularly suitable where compromised surfaces exist.
403 Oil Tolerant Primer is supplied as a two pack system, comprising pre-weighed amounts of base and curing agent components.
Recommended for use as a primer for oil contaminated concrete or steel prior to the application of our Epoxy Floor Coatings or Screeds.
This product is for Professional Use Only.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Typical Properties
- Coverage
- Surface Preparation
- Application
- Cleaning
- Curing
- Limitations
- Storage & Shelf Life
- Health & Safety
Features & Benefits
- Recommended for use as a primer for oil contaminated concrete or steel
- Two-pack
- Outstanding adhesion to concrete and other substrates
- Solvent free, low odour
- Surface tolerant
- Excellent wetting properties
- Low viscosity, easily applied
- Pre-packaged units ready for use
Typical Properties
Technical Data | |
---|---|
403 Oil Tolerant Primer | |
Viscosity: | 600-800 cps @ 20°C |
Pot life @ 20°C: | 60 Minutes |
Pot life @ 10°C: | 90 minutes |
Adhesion to concrete: | 3.8 MPa (concrete failure) |
Please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for specific advice.
Coverage
- 2.0 - 3.3m²/Kg depending on surface texture
Surface Preparation
- New concrete surfaces shall be a minimum of 7 days old
- Old oil-contaminated concrete surfaces shall be washed with detergent and water and allowed to dry
- Suitable mechanical treatment such as vacuum grit blasting or mechanical scabbling are recommended to ensure the removal of contaminants
Mixing:
- 403 Oil Tolerant Primer is supplied in pre-weighed containers ready for mixing
- Pour the contents of the curing agent tin into the base container and thoroughly mix, preferably by mechanical means until a uniform colour is achieved
Mixing Ratio:
- By Volume - 1.94 Base : 1 Curing Agent
- By Weight = 100 Base : 48.8 Curing Agent
Application
- Apply by brush, roller or squeegee to the prepared surface at a nominal rate of 0.3 to 0.5Kg/m²
- Ensure that the surface is thoroughly wetted out
- If the primer is to be allowed to cure prior to overcoating, then it is permissible to broadcast 0.4-0.7mm 504 Standard Anti-Slip Aggregate into the wet primer to assist subsequent adhesion of our Epoxy Coatings
- Our Epoxy Screeds and Mortars may be applied to the wet primer
Cleaning
- Clean equipment with 109 Tool Cleaner prior to curing of the coating
Curing
- Touch dry after 8 hours @ 20°C
- Hard dry after 16 hours @ 20°C
Limitations
- Do not apply to temperatures below 3°C, or if there is a risk of frost during the initial curing period
- With severely contaminated old concrete it is recommended that a pull off adhesion test be carried out prior to full scale application
Storage & Shelf Life
- Store in dry conditions at temperatures between 10°C and 25°C
- Do not expose to freezing conditions
- 403 Oil Tolerant Primer has a minimum 12 months shelf life when stored in original, unopened containers in accordance with manufacturer’s instructions
Health & Safety
- Avoid contact of the material with skin and eyes
- Wear gloves and goggles
- Wash off splashes immediately with soap and water
- Please refer to Material Safety Data Sheet for additional information
- 403 Oil Tolerant Primer shall be applied strictly in accordance with the manufacturer’s instructions
For specific advice regarding any aspect of this product, please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]
Data sheet
- For Use By
- Professional Use
- Application Method
- Brush, Roller, Squeegee
- Colour
- Clear
- Single, Two or Three Pack
- Two-Pack
- Pot Life (at 20°C)
- 60 Minutes
- Coverage
- 2.5m² per KG
- Min. Application Temperature
- 3°C
- Shelf Life (from date of manufacture)
- 12 Months
- Touch Dry
- 8 Hours
- UN Number (Activator)
- UN2735
- UN Number (Base)
- UN3082
- Base Type
- Solvent-Free
- Suitable For Use On
- Concrete
- Suitable For Use On
- Steel
- Application Method
- Brush
- Application Method
- Squeegee
- Application Method
- Roller
- Components
- 2K
- Usages
- Oil Resistant
- Product Usage Type
- Primer
- Product Category
- Paints
- Colour Family
- Clear
- Product Type
- Epoxy
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
403 Oil Tolerant Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
504 Standard Anti Slip Aggregate
504 Standard Anti Slip Aggregate is a specially formulated quartz aggregate to be added to various products in our floor coatings range to provide increased `anti-slip` properties in both dry and wet conditions to improve safety. Produces a rough, non-skid surface Hard wearing and chemical resistant Coloured Quartz Aggregate 0.4-0.8mm...
109 Tool Cleaner
109 Tool Cleaner is a specialist equipment cleaner suitable for the removal of uncured epoxy, polyester and polyurethane resins. Low Hazard Low evaporation rate Excellent solvency powers 80% biodegradable This product is for Professional Use Only Images are for illustrative purposes only and may differ from the actual product More...