- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Jotun Conseal Touch-Up is a one component physically drying acrylic coating with a matt finish. This high build product is fast drying and can be used direct to metal.
- Ideal as a primer/topcoat in atmospheric environments
- Can be applied at sub zero surface temperatures
- Available in hundreds of RAL, NCS, BS and Jotun Colours - 1,100+ new colours just added!
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Product customisation
Don't forget to save your customization to be able to add to cartJotun Conseal Touch-Up is a one component physically drying acrylic coating with a matt finish. It is a high build product that is fast drying and can be used direct to metal. Ideal as a primer/topcoat in atmospheric environments, it can be applied at sub zero surface temperatures.
Jotun Conseal Touch-Up is recommended for refineries, power plants, bridges and buildings. Suitable for a wide range of industrial structures.
Approvals and certificates
- Grain, Newcastle Ocupational Health
Additional certificates and approvals may be available on request.
Data sheet
- Manufacturer
- Jotun
- For Use By
- Professional Use
- For Use On
- Steel, Aluminium
- Application Method
- Brush, Roller, Spray
- Sheen
- Matt
- Colour
- Fully Tintable
- Single, Two or Three Pack
- Single
- Pack Size
- 5L, 20L
- Application
- Brush, Roller, Spray
- Touch Dry (at 20°C)
- 10 Mins
- Coverage
- 4.1 to 6.5m²/l
- Touch Dry
- 20 mins
- UN Number
- UN1263
- Base Type
- Solvent-Based
- Suitable For Use On
- Aluminium
- Suitable For Use On
- Steel
- Suitable For Use On
- Galvanised Steel
- Suitable For Use On
- Carbon Steel
- Suitable For Use On
- Shop Primed Steel
- Suitable For Use On
- Coated Surfaces
- Suitable For Use On
- Bridges
- Suitable For Use On
- Atmospheric Environments
- Suitable For Use On
- Industrial Structures
- Suitable For Use On
- Refineries
- Suitable For Use On
- Power Plants
- Suitable For Use On
- Buildings
- Suitable For Use On
- Primed Surfaces
- Suitable For Use On
- Compatible Existing Coatings
- Finish
- Matt
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Usages
- High Build
- Usages
- Low Temperature
- Usages
- Atmospheric
- Usages
- Direct to Metal
- Product Usage Type
- Primer & Topcoat
- Product Range
- Conseal Touch-Up
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Off-White
- Colour Family
- Black
- Colour Family
- Magnolia
- Colour Family
- White
- Colour Family
- Anthracite Grey
- Colour Family
- Neutral
- Colour Family
- Cream
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Categorised As
- Metal Paints > Low Temperature Direct-to-Metal Paints
- Seasonal
- Cold Weather
- Product Type
- Acrylic
- Environment
- Atmospheric
- Environment
- Low Temperature
- Touch Dry/Dust Free (@ 20-25°C)
- 10 mins
- Product Attributes
- High Build
Questions
Question about the product
Graham West on 2024-04-06 12:08:14 | Question:
Best way to apply Jotun Conseal to car chassis brush or sprayer ( I have an underseal compressor driven paint pot or a compressor paint sprayer) obviously with thinned paint to correct ratio. Thinking brush will be best for most areas Kindest Regards |
Answer from Rawlins’ Technical Team:
Thank you for your enquiry. This product hasn't been specified for this area, therefore isn't something we can recommend for certain will work. If the chasis is clean, dry, sound and bare, 3 - 4 brush coats could be applied, but there is no guarantee this will work, and if applied it shouldn't be thinned. We would recommend to test on a small area for compatibility and adhesion prior to full application. | |
Adam on 2021-08-12 23:41:09 | Question:
Hi I’m looking to paint my aluminium boat (top side) it will be used in salt water but will be kept on a trailer could you please tell me if the paint jotun reference: jot1014 Would be suitable? Kind regards |
Answer from Rawlins’ Technical Team:
Thank you for the enquiry we have contacted you directly for more information. | |
Simon Caudwell on 2019-10-20 14:07:26 | Question:
What is the correct thinners to use with conseal touch up? |
Answer from Rawlins’ Technical Team:
Jotun Thinner No. 7 is the recommended thinner for Jotun Conseal Touch-Up. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Jotun Conseal Touch-Up is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT