- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
A fast drying, shop primer designed for high welding and cutting speed, giving reduced weld porosity and back burning or as a temporary primer in a new construction phases or as a primer in a complete coating system.
Jotun Muki EPS is a two component, chemically curing epoxy coating. It is a shop primer designed for high welding and cutting speed, giving reduced weld porosity and back burning. It is fast drying making it suitable for stacking shortly after application. Jotun Muki EPS can be used as a temporary primer in a new construction phase, as a holding primer or as a primer in a complete coating system in atmospheric and immersed environments.
Jotun Muki EPS is suitable for properly prepared carbon steel substrates and recommended to be applied in an automated shop priming line in lower film thicknesses or applied by airless spray when used as holding primer. Compatible with advanced welding technologies including MIG, MAG and G-FCAW when applied in low film thickness.
Typical use
Marine: Suitable as shop primer or holding primer on vessels.
Protective: Suitable for structural steel and piping to be exposed to corrosive environments up to very high and immersed.
Recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel.
Approvals and certificates
- Welding approved according to DVS-guideline 0501
- Type approved as shop primer by DNV
- Type approved shop primer by RMSR
- Health approved for use as shop primer by Newcastle occupational Health
Additional certificates and approvals may be available on request.
Features & Benefits
- Good corrosion protection: 3-5 months
- Multi-functional and quick drying
- Good chemical resistance and mechanical strength
Product at a glance
- Multi-functional
- As a preconstruction primer on blast cleaned steel surfaces in automatic shoppriming plants to protect steel during transport, storage and production
- As an Epoxy primer for application in automatic shoppriming plants as a primer in paint system for corrosion classes, ISO 12944 C2 to C4
- As a Holding primer for temporary protection of blast cleaned steel surfaces
- Easy to apply in shop primer plant
- Good chemical resistance
- Good mechanical strength
- Good adhesion to substrate
- Works well together with cathodic protection
Data sheet
- Manufacturer
- Jotun
- For Use By
- Industrial Use
- Interior / Exterior Use
- Exterior Use
- Water / Solvent Based
- Solvent
- For Use On
- Steel
- Application Method
- Airless Spray, Brush
- Sheen
- Matt
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Two-Pack
- Product Certifications
- Type approved shop primer by RMSR, DNV GL, Welding approved shop primer according to ISO 17652-2
- Coverage
- 5 to 16.7m²/l
- UN Number (Activator)
- UN1263
- UN Number (Base)
- UN1263
- Base Type
- Epoxy
- Base Type
- Solvent Based
- Suitable For Use On
- Steel
- Suitable For Use On
- Carbon Steel
- Finish
- Matt
- Application Method
- Brush
- Application Method
- Spray
- Usages
- Weldable
- Usages
- Atmospheric
- Usages
- Immersion
- Usages
- Shop Primer
- Product Usage Type
- Primer
- Product Range
- Muki
- Colour Family
- Grey
- Colour Family
- Red
- Colour Family
- Black
- Dry to Recoat (@ 20-25°C)
- 7 hours
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Jotun Muki EPS is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Jotun Thinner No. 17
Jotun Thinner No. 17 is a paint thinner designed to improve the flow of a range of Jotun epoxy products. It can also be used as cleaner of pumps and tools after and before painting. Jotun Thinner No. 17 is specially suitable as a thinner for epoxies and similar type products except Tankguard series.
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...