List of products by brand Promat
Promat is a global leader in passive fire protection. They offer a complete portfolio of certified and tested products and systems to design and build a fully reliable fire safety solution for your building project.
Promat Promaseal® fire stopping products are used to seal gaps in walls, floors and ceilings and reinstate the fire performance of compartment walls & floors after services have been installed.
Please contact Rawlins Paints Technical Department for information regarding the full range of Promat products on 0113 2455450 (option 2) or send a message to [email protected].
Showing 1-12 of 15 item(s)
Promat Promaseal Expansion Joint Strips are highly compressible, flexible, water resistant fire seals which are used where movement joints are formed in the structure of buildings. Promat Expansion Joints consist of layers of intumescent material bonded to a Class O foam.
Successfully fire tested for 120 minutes in joints within masonry and...
Promat Promaseal Fire Barrier 50mm is a thick lightweight mineral fibre slab with a white endothermic, ablative coating applied on both sides of the slab. Fire Barrier slabs are used to prevent the spread of fire through openings in fire resistant walls and floors, where these are penetrated by building and communications services.
Achieves...
Promat Promaseal Fire Barrier Coating is a water based fire stopping coating, used in conjunction with Promaseal Fire Barrier systems to seal edges and joints.
Used as part of the certified Promat Promaseal Fire Barrier System
Up to 240 minutes fire resistance (BS476 Part 20)
Used to seal edges and joints
Please note all Promat products...
Promat Promaseal Fire Compound - Extra Strength is a gypsum cement, high strength firestopping compound used to fill openings in rigid walls and floors for the passage of services.
Up to 240 minutes fire resistance for walls and floors (BS476 Part 20)
Good acoustic insulation
Non combustible
Provides a high strength surface
Easily mixed...
Promat Promaseal Fire Pillows are used to limit the spread of fire through openings in fire resisting walls and floors used for the penetration of cables or services. They are particularly useful where alterable fire seals are required.
Easy to alter and adjust to suit opening
Strong, flexible and water resistant
Available in a variety of...
Promat Promaseal Flex Barrier - Double is a thick ablative coated (both 2 sides), highly flexible strip for fire stopping. It forms part of the Promaseal Flex System. The system comprises of Promaseal Flex Barrier, a 1200mm long x 150mm wide x 100mm highly flexible strip and Promat Promaseal Flex Coat.
Please Note: This product is coated on...
Promat Promaseal Flex Barrier - Single is a thick ablative coated (one side only), highly flexible strip for fire stopping. It forms part of the Promaseal Flex System. The system comprises of Promaseal Flex Barrier, a 1200mm long x 150mm wide x 100mm highly flexible strip and Promat Promaseal Flex Coat.
Please Note: This product is coated...
Promat Promaseal Flex Coat is a coating, which is applied to all barrier joints and junctions with a minimum 20mm overlap on all surrounding substrates and services. It forms part of the Promaseal Flex System. The system comprises of Promat Promaseal Flex Coat and Promaseal Flex Barrier, a 1200mm long x 150mm wide x 100mm highly flexible...
Promat Promaseal HPEx Sealant is an acrylic based graphite high pressure sealant, used to reinstate the fire performance of wall and floor constructions where they have been penetrated by cables, plastic pipes and insulated metal pipes.
Expands under heat to seal gaps around cables, and to close off plastic pipes and insulated metal pipes...
Promat Promaseal Intu Collars are used to seal plastic and insulated metal pipe penetrations installed in a wide variety of substrates including flexible and rigid walls, rigid floors and in the Promaseal Fire Barrier system.
Supplied pre-assembled, available in variety of sizes 55 - 160mm
Tested on angled pipes
Can be fixed directly to...
Promat Promaseal Intumescent Acrylic Sealant is a fire stopping sealant for walls and floors, used to seal joints up to 50mm wide and for sealing around services. Allows for ± 10% movement. Available in 310 ml tubes.
Tested to BS and EN Standards
Up to 240 minutes fire resistance (BS476 Part 20)
CE Marked
Certifire Approval
Excellent...
Promat Promaseal Pipewrap consists of a water-resistant sleeve around a flexible intumescent core, used to prevent the passage of smoke, toxic gases and fire through gaps in compartment walls and floors caused by the collapse and/or melting of combustible services in the event of fire.
Maintains the fire resistance of walls and floors when...
